Been driving around town for the past week with the FX400 clutch in a tuned MK6 and it's great. Stock-like engagement and the clutch holds well.
#71
From left to right you’ll see Siemens 630cc, Bosch Green Giants, Bosch EV14 550cc, Injector Dynamics 725cc, 850cc, 1000cc, Bosch 36lb’s. We’ve got more, but it’s hard to fit them all in one picture. If you’re looking for fuel injectors then you’re in the right spot.
Checkout our Blog and Facebook:
www.facebook.com/ctsturbosystems
www.ctsturbo.com
#72
Been driving around town for the past week with the FX400 clutch in a tuned MK6 and it's great. Stock-like engagement and the clutch holds well.
#73
Another few layers of urethane and the floors in our new workshop and the addition should be complete. You can see some old unsightly lighting hanging down, which will soon be gone. In the far corner of the room (top middle) the new lighting is visible, which will help us during those late nights developing new turbo goodies…
Check us out at our blog and on Facebook:
www.facebook.com/ctsturbosystems
www.ctsturbo.com
#74
emailed!
"I'm DrB and I approve this message."
instagram doktor_b
projekt oveRhaul - i hate my caR and i hate you too
#75
FX850 ordered today!
Nik & Clay are freaking awesome.
"I'm DrB and I approve this message."
instagram doktor_b
projekt oveRhaul - i hate my caR and i hate you too
#76
#77
We were lucky enough to receive a large shipment of the Borg Warner K04-0064 with Forged Mill Wheel (FMW) Technology, which uses the latest generation of blade aerodynamics. For some reason our customers keep snapping up these Borg Warner for the TSI and TFSI upgrades. A couple other cool things we’re pushin’ out the door today: Wavetrac 02J diff’s (Amazing product), a MK4 R32 FX850 twin disc from our friends at Clutch Masters and a Garrett GTX3576R for someone upgrading a T25 based TFSI turbo kit to something that will really impress the motor heads.
Check us out at our Blog and Facebook:
www.facebook.com/ctsturbosystems
www.ctsturbo.com
#78
"I'm DrB and I approve this message."
instagram doktor_b
projekt oveRhaul - i hate my caR and i hate you too
#79
looking at an FX400 w/o flywheel. I have a Steel billet SMF, I am curious if i should opt for a sprung or unsprung disc... i read up on it and it was suggested if a SMF get sprung, if with a DM get the unsprung... Any advise would be appreciated.
Also can u OM me pricing for w/o flywheel, thanks
#80
#82
#83
So whats the warranty like with CM, im asking because there have been a LOT of QA issues popping up here and there nd im very hesitant. i want a 400 unsprung but am very hesitant
#84
E,
We have very very few problems with clutch masters clutch kits, we sell the most CM clutch kits for a VW/Audi tuner hands down, you can ask clutch masters to confirm. So if we're having few problems with these kits then that should tell you something. Their warranty is 1 year against MFG defects last I checked.
Thanks,
Clay
#85
Sent Nik an email a week or so ago. lemme know if he got it? it was regarding some questions for possibly spending some money with u guys haha
#87
I have the FX100 with an aluminum flywheel. Other then the rattle and small vibrations (NORMAL) its a good product I believe. I can feel the difference when I really go through the gears, so I am excited for the track/future mods. I dont drive the car as hard as I should so hopefully it will last a very long time
The service is also good.
Heart pumping antifreeze as I stand here.
Lloyd Banks
#88
Sent pm for fx400 6-puck with steel flywheel for 04 r32 Thanks
-JAMES-
Daily Drive /Beaten/Built /UM Turbo R - VR NATION
#89
#90
Ordering online? If you are don’t forget to look in the bottom of your box for summer swag. Lucky customers will receive CTS Summer Swag… which could include T-Shirt (you mad bro?), CTS coveted bottle opener, CTS Lanyards, and CTS plate frames. Sneak peak of Summer Swag goodness:
![]()