2010 Camaro widebody

[Extreme Dimensions]

Just a little peek into what we've been doing over here at Extreme Dimensions in conjunction with Real Auto Works (RAW)

[danny_16v]

looks almost undriveable... nice show car I suppose

[TooFitToQuit]

That side skirt looks pretty awkward. Any plans for the 2010+ Mustang?

What's it made out of?

[A3VRSIX]

WOW that looks like sh!t. I am sure your quality of worksmanship is good but man someone smack the designer.

[sunofernest]

body kit looks wavy in the pics, the side skirts look terrible, and it would look better if it was raised an inch or so.

[IHateSpeedBumps]

looks almost undriveable... nice show car I suppose

That side skirt looks pretty awkward.

WOW that looks like sh!t.

[NeezDuts]

WOW that looks like sh!t. I am sure your quality of worksmanship is good but man someone smack the designer.

What a dick thing to say to the people who designed it.

[FastGTi]

I realize the Camaro was never lithe, but I miss the days when sports cars looked purposeful and athletic (think gymnast, not bodybuilder). It seems almost all modern cars go for a brutish bigger than life look.

[MikkiJayne]

Well I like it

[IHateSpeedBumps]

What a dick thing to say to the people who designed it.

Its the truth... whats the problem? Can you not stand to hear the truth?

[A3VRSIX]

Its the truth... whats the problem? Can you not stand to hear the truth?

I think the little sly face means he is just upset that I beat him to the punch.

[Dieselstation]

perhaps if the car were in matte black instead of orange.. it wouldn't look so bad.

[sandiegan]

No me gusta

[mdp310]

Nope, can't say I like it, especially the front wheel well. It just looks off.

[Gbeav]

[JustinCSVT]

Needs a little detail work but otherwise the car looks mean as f***.

[patrickvr6]

Needs bigger wheels.

[Mechorg]

I would hate to be a banner advertiser on here..

The car doesn't look bad. I really like the new Camaro, actually. It does kinda look like a nitro RC car, though.

[VapedTalon]

The car looks pretty darn good for not being fully completed. That being said there are a few points I would change if I was paying the tab on the vehicle.


There needs to be some sort of inner fender liner so that it doesn't seem like you can see right through the car.


These inlets require a black mesh or honey comb structure to make it look more solid and not like the cheap kits you see these days(much like my above comment.)


Now I'm not sure how much the light is playing this up, but the bumper needs blend in this difference in height between the rear quarter/bumper.

The Stance of the vehicle just seems to be missing something for me. The wheels look like they have to high an offset(this is probably due to clearence issues with the car being low.) I would raise the car an inch or two and run a much more agressive offset/tire combo.

All that being said it looks like some quality work went into it

[sdpauly]

lower it

[NeezDuts]

Its the truth... whats the problem? Can you not stand to hear the truth?

Are you ****ing with me, or do you not have any social skills?

[moneytrap]

It has all the fit and finish of an RC car.

[Traldan]

I sure hope you're not trying to drive that like one might hope to drive a mildly-muscular car.

[tngdesi]

You know, I never noticed that slit on the front of the Camaro in front of the hood before. Looks like the light on the front of KITT from Knight Rider.....

[Elbows]

I don't care for it - but perhaps if it had smaller wheels that weren't tucked...but stuck out and filled the actual wide-body...and it wasn't slammed on bags or whatever kids are using these days - it looks like riced out Muscle...I guess it looks confused is what I'm trying to say.

[krey]

i like it...just needs some bigger wheels and some rs hideaway lights

[Extreme Dimensions]

looks almost undriveable... nice show car I suppose

That's precisely what it is, a show car.

That side skirt looks pretty awkward. Any plans for the 2010+ Mustang?

What's it made out of?

I do believe we have a 2010 Mustang that is being built as we speak. That one won't debut until SEMA in November. The kit is made from our Duraflex material.

WOW that looks like sh!t. I am sure your quality of worksmanship is good but man someone smack the designer.

To each their own. Everyone has their opinion and are definitely entitled to it. If no one liked it, we wouldn't be selling out of every shipment we got in.

body kit looks wavy in the pics, the side skirts look terrible, and it would look better if it was raised an inch or so.

Can you point out the specific areas that you think are wavy? That's definitely something we would like to know.

Well I like it

Thank you sir.

perhaps if the car were in matte black instead of orange.. it wouldn't look so bad.

This is actually a differen color than it was initially. The first color was a weird burnt orange which no one liked at all.

Needs bigger wheels.

Offset or bigger overall? Keep in mind that the car is on bags and that when fully lowered, the wheels need to clear he fenders.

The car looks pretty darn good for not being fully completed. That being said there are a few points I would change if I was paying the tab on the vehicle.


There needs to be some sort of inner fender liner so that it doesn't seem like you can see right through the car.


These inlets require a black mesh or honey comb structure to make it look more solid and not like the cheap kits you see these days(much like my above comment.)


Now I'm not sure how much the light is playing this up, but the bumper needs blend in this difference in height between the rear quarter/bumper.

The Stance of the vehicle just seems to be missing something for me. The wheels look like they have to high an offset(this is probably due to clearence issues with the car being low.) I would raise the car an inch or two and run a much more agressive offset/tire combo.

All that being said it looks like some quality work went into it

I do believe that it is the light playing tricks on you with the fenders and such. In regards to the mesh and such, these pictures were taken roughly 12 hours after the finish work was done so I'm sure a few details still need to be taken care of.

lower it

I think you're Lol

I sure hope you're not trying to drive that like one might hope to drive a mildly-muscular car.

No sir, strictly a show vehicle.

I don't care for it - but perhaps if it had smaller wheels that weren't tucked...but stuck out and filled the actual wide-body...and it wasn't slammed on bags or whatever kids are using these days - it looks like riced out Muscle...I guess it looks confused is what I'm trying to say.

When the suspension is raised a bit, the wheels camber out to fill the wheel wells but because it's at the very bottom of it's suspension, they are tucked.

[ABAcabby]

I think it looks great.

But then i read all the comments.
Now i hate it.

some tight black mesh (matte finish) in the inlets would be a nice touch. still one of the better looking new Camaro's i've seen.

[IHateSpeedBumps]

Are you ****ing with me

[CoolJetta3]

It has all the fit and finish of an RC car.

Ever been on a scale RC car forum? Some of those RCs have better fit and finish than a real car

[VapedTalon]

Well if those other points are covered then raise it up a bit and call it done

[Ernie McCracken]

I'm with the masses on this one, but I guess this is the bottom line.

If no one liked it, we wouldn't be selling out of every shipment we got in.

[SolbergWRCFan]

[IHateSpeedBumps]

If no one liked it, we wouldn't be selling out of every shipment we got in.

You do know that there are a lot of people in the states (esp ones with camaros) that have no taste
I know most of the Camaros i see around here are driven by meat heads that have a Brodozer at home.

[oh noes! cars!]

You do know that there are a lot of people in the states (esp ones with camaros) that have no taste
I know most of the Camaros i see around here are driven by meat heads that have a Brodozer at home.

Like he cares! Bros put food on his table