curious - how many turbo R owners are on here..

[R32R1]

yes, its a kinetics/CTS stg 3 with coated downpipe, my setup has changed a bit now, different downpipe and bigger hot side with V-band and open dump.

Curious, I haven't mocked up the kit but your cold side is facing upwards like mine. I thought the tubes ran under and towards the passenger side framerail?

[huichox4]

Curious, I haven't mocked up the kit but your cold side is facing upwards like mine. I thought the tubes ran under and towards the passenger side framerail?

I probably didnt clock the turbo until after I dropped the engine back in the car. I think the cold side has to point almost if not straight back to the firewall and then 90 bend to the IC pipes.

[R32R1]

I probably didnt clock the turbo until after I dropped the engine back in the car. I think the cold side has to point almost if not straight back to the firewall and then 90 bend to the IC pipes.

Ahh gotcha okay

[abeR]

holiday turbo bump


who is getting a snail under the tree?

[RDIRTYTOO]

santas got my snail on the way he sent me trackin numbers so hopefully when i get back from afghanistan in march ill be turboed too

[abeR]

[nihad888]

<<<

[nihad888]

<<

[abeR]

whats shakin Nihad

I stalked you earlier last month. Whats your setup?

[nihad888]

TURBOED

[abeR]

ive been slacking

updates to your setups?

whos new?



if you are not listed, or dont want to be - shoot me an IM and I can add you.

sharing is caring, and we all love a lil turbo R info.

[RDIRTYTOO]

ive been slacking

updates to your setups?

whos new?



if you are not listed, or dont want to be - shoot me an IM and I can add you.

sharing is caring, and we all love a lil turbo R info.

well i have a thread up on my turbo install, almost done with it too, we are in the last phases of unleashing it onto public roads lol

[abeR]

I will put some time into updating this thread over the next few days.

its almost summer .. whos got something new to share?

[Jason@C2Motorsports]

not a MK4 but here is this =]

[JC@DouglasVW]

more info?

[jmh2002]

more info?

Its been around a while and is insane. 700hp+ bi turbo

http://www.m-t-e.de/tuning/R32_BiTurbo_MTE/index.php

http://www.youtube.com/watch?v=THLAj...eature=related

http://www.youtube.com/watch?v=pHHEG...eature=related

http://www.youtube.com/watch?v=DMMDR...eature=related

For more info: http://www.google.co.uk/search?sourc...=m-t-e+biturbo

[abeR]

d'oh dude beat me to it.

[JC@DouglasVW]

very cool.

[tomturbo]

dyno ?

by the way got a turbo too, hgp 445 dsg with ftown streetmachines exhaust.

This is my R32T I will post pics of the engine bay later I cant seem to find any at this time hmmm..

Video

http://www.youtube.com/watch?v=fSME-i30PSU


ENGINEFully Rebuilt Motor (Schimmel Performance)
~~~~~~~~~~~~~~~~~~~~~~~
-JE Pistons
-Manley forged rods
-Manley rod studs
-Arp Main Studs
-Raceware Head studs
-New Rod and Main bearings

FUEL MANAGEMENT
~~~~~~~~~~~~~~~~~~~~~~~
-Unitronic 1000cc software
-4" inch aluminum MAF
-Siemens 870cc Injectors w/spacers
-Porsche Twin Turbo Bosch Fuel Pump (Bosch 044 043)
-Fuel Surge Tank
-Fuel Surge Tank High pressure hoses and fittings
-Custom Fuel Rail with gauge
-Custom Oil catch can setup

TURBO SETUP
~~~~~~~~~~~~~~~~~~~~~~~
-GT4088R Dual Ball Bearing Turbo (Ceramic Coated)
-3" Custom Built Down Pipe
-3" EIP competition Exhaust w/ high flow cats
-PAG PARTS Cast Turbo manifold (Ceramic Coated
-Custom SS Exhaust Manifold Heatshield
-Tial 38mm Wastegate (recirculated)
-HKS Blow Off Valve (recirculated)
-HPA Short Runner Intake Manifold
-Custom 4" Intake with EUROSPORT Heatshield W/K&N Filter
-HUGE Treadstone Intercooler 32x12x3.5
-Powdercoated Custom made IC piping (2.5" hot and 3" cold)
-T-Bolts with 4 ply Silicone Couplers
-Prosport Boost & Oil pressure Gauge
-LM-1 Wideband Mounted in center vent
-N2BN WOT BOX (Launch Control) with flat foot shifting

Drivetrain Fully Built at 53k miles (Schimmel Performance)
~~~~~~~~~~~~~~~~~~~~~~~
-European Lengthened gear set
-Peloquin Front LSD
-SPEC Triple Disc Clutch setup
-Haldex Blue upgraded controller
-Royal Purple trans gear oil

Suspension
~~~~~~~~~~~~~~~~~~~~~~~
-Bilstein PSS9 Coilovers
-Adjustable lower rear control arms
-Neuspeed front lower tie bar
-Neuspeed Rear Sway Bar
-Neusped front strut tower brace
-Rear strut tower brace

[jmh2002]

dyno ?

by the way got a turbo too, hgp 445 dsg with ftown streetmachines exhaust.

Nice

I hope to finally be able to join this list this year after a longer than intended wait...

[nothing-leaves-stock]

now building one for myself...build thread under the name "trouble"

our one Lap car

[flagg9898]

i got one =]

[gmoneyR32]

[Jonnymooshoo]

Will be done in a couple of weeks. Check out my signature for a link to the build thread

[huichox4]

Will be done in a couple of weeks. Check out my signature for a link to the build thread

welcome to the club

[Jonnymooshoo]

welcome to the club

Hey Luis, here's a photo of our cars. I'll try to get a better picture of them together next time

[abeR]

Time to update this thread!

[huichox4]

thanks for the pic man,

[luckypenney]

Hmmm, I don't know how I haven't made the list yet. Anyway, CTS Stage 3/GT3582R/CM 850FX. Some things are being altered as I go.

[R32.DEVIANT]

Hmmm, I don't know how I haven't made the list yet. Anyway, CTS Stage 3/GT3582R/CM 850FX. Some things are being altered as I go.

Sounds a nice set up. Still on my HPA Blackjack turbo at the moment but got a forged engine with bigger turbo etc to fit later in the year as i want more power.

[jmh2002]

Time to update this thread!

You can add me if you wish

[PowerDubs]

VF RSR install in process.

[JDM-JTI]

can i play?

[abeR]

if you guys would link a build thread in your post it would be rad. otherwise I will do my internet sleuthing this weekend

thanks!

[Rmeitz167]

Joining the club