Blue Balls, PA.

[Philip J. Fry]

Long shot, but I will be out of work at 3p today. Going home to pull my passenger rear fender more and some other little things (fuel filter and subframe bolts). Wanna swing by?

I'm down at Tiff's parents' place for a picnic later today. I'm fishing with her dad and brother in a bit. Unfortunately, I won't be able to swing up.

[KIDVersion 1]

#frenchfriedtaters

They say I'm well now.

I'm down at Tiff's parents' place for a picnic later today. I'm fishing with her dad and brother in a bit. Unfortunately, I won't be able to swing up.

Ah damn.

[Chaoz]

Krista, congratulations to you and your family! She is adorable!

Zane, Christof has been stalking me. It is indeed at my parents' place.

ahh damn man your making good progress did you get you entire kit yet? my buddy starts his 5857 build like next week or so

Stalking? You have a build thread. Not my fault Zane can't read.

Sorry about last night. I came home from work and crashed on the couch...woke up long enough to listen to your voicemail, text you, and move to the bed.

hey hey hey i read something once

[Philip J. Fry]

ahh damn man your making good progress did you get you entire kit yet? my buddy starts his 5857 build like next week or so

thanks, dude! i'm running out of time if i want it done by Waterfest. all of the main components for the kit are here. i just added to the build (of course) and told Chris i need a different (more expensive) fuel pump setup, ARP head bolts (instead of OEM), Calico coated rod bearings (instead of OEM), and a MBC. I'm also buying everything i need for catch can setup, and still have to order a boost gauge and a wideband. then i have to get the downpipe adapter pipe cut out for an O2 sensor bung.

[KIDVersion 1]

Morning all.

Had a productive night last night, even though it was about 950º out.

[crookedR32]

Morning all.

[Chaoz]

thanks, dude! i'm running out of time if i want it done by Waterfest. all of the main components for the kit are here. i just added to the build (of course) and told Chris i need a different (more expensive) fuel pump setup, ARP head bolts (instead of OEM), Calico coated rod bearings (instead of OEM), and a MBC. I'm also buying everything i need for catch can setup, and still have to order a boost gauge and a wideband. then i have to get the downpipe adapter pipe cut out for an O2 sensor bung.

Damn you have some work to do man yea you def can't use oem stuff lol I'm stoked to see this thing Jeremy

[Philip J. Fry]

Damn you have some work to do man yea you def can't use oem stuff lol I'm stoked to see this thing Jeremy

i'm excited too! depending on the time table to finish, i may hold off on the wideband, and just dial the boost low until i can get the O2 sensor bung welded in. i want this thing on the road, but only if it's ready to go. H2O is going to be extra special this year.

[Chaoz]

i'm excited too! depending on the time table to finish, i may hold off on the wideband, and just dial the boost low until i can get the O2 sensor bung welded in. i want this thing on the road, but only if it's ready to go. H2O is going to be extra special this year.

Haha yes just make sure everything.g is do e right the first tome it it will bring hell upon you lol

[Philip J. Fry]

Haha yes just make sure everything.g is do e right the first tome it it will bring hell upon you lol

i want it to bring a different kind of hell upon me.

[anteramk5jetta]

i'm excited too! depending on the time table to finish, i may hold off on the wideband, and just dial the boost low until i can get the O2 sensor bung welded in. i want this thing on the road, but only if it's ready to go. H2O is going to be extra special this year.

I can do the o2 bung for ya no problem. Just need the pipe and o2 bung

[Philip J. Fry]

I can do the o2 bung for ya no problem. Just need the pipe and o2 bung

really? awesome. i don't even know where to source a threaded O2 bung from? but i have to research it first and mock up the pipe before i'll know exactly where i want it. from what i understand, you want it as close to the WG/hotside as possible.

[anteramk5jetta]

really? awesome. i don't even know where to source a threaded O2 bung from? but i have to research it first and mock up the pipe before i'll know exactly where i want it. from what i understand, you want it as close to the WG/hotside as possible.

Yup, that would be correct and for an o2 bung, you should be able to pick it up from any auto parts store if not google it. I know summit racing sells them

[Philip J. Fry]

would you prefer to work with a pre-curved or flat bung for welding? my O2 pipe is stainless steel, so the bung i'll buy will be stainless as well. also how much would you want for doing this for me? i also know one of the owners from Area 1320 but haven't contacted him yet.

[IdontOwnAVW]

Picked up some good condition fender flares and side skirts with all the jack point flaps intact, just a little faded. I'll have to pick up some Kiwi black leather dye soon and get to work.

$165 and the guy brought them down to me.

[HideYoKids]

new car.

Only thing it needs is an XC grille.

[IdontOwnAVW]

How are your pictures so large?

[HideYoKids]

How are your pictures so large?

I don't know, I'm just uploading to vortex through crapatalk

[Ericc.]

bout to pick these up , lemme know what you guys think

http://boston.craigslist.org/gbs/pts/3036665418.html

[HideYoKids]

Meh.

[Chaoz]

bout to pick these up , lemme know what you guys think

http://boston.craigslist.org/gbs/pts/3036665418.html

does that say 1200!?!?!?!? fucccccckkkkk that ****.

[Ericc.]

Meh.

right over your head zachary

does that say 1200!?!?!?!? fucccccckkkkk that ****.

yup hahaha people are outa their minds!

[anteramk5jetta]

would you prefer to work with a pre-curved or flat bung for welding? my O2 pipe is stainless steel, so the bung i'll buy will be stainless as well. also how much would you want for doing this for me? i also know one of the owners from Area 1320 but haven't contacted him yet.

doesn't matter, I can work with either. 40 sound good?

[Chaoz]

Who has 15mm spacers!? I need some

[Philip J. Fry]

i don't know. but i need some 15mm 5x130 to 5x100 adapters.

[crookedR32]

ZOMBIES ARE HERE!!!!!!!!

[KIDVersion 1]

Brent!

Do you have an intake on your R? I'm looking to sell the EVOMS asap so I can move in a different direction.

[crookedR32]

Brent!

Do you have an intake on your R? I'm looking to sell the EVOMS asap so I can move in a different direction.

hey bud i saw your txt but my phone was being dumb and froze...i have the HPA intake (trying to sell so I can get Forge one)


Ill check around see if I find anybody and ill let you know

[KIDVersion 1]

hey bud i saw your txt but my phone was being dumb and froze...i have the HPA intake (trying to sell so I can get Forge one)

Ill check around see if I find anybody and ill let you know

Damn. Same move I am looking to make. Yeah let me know.

[KIDVersion 1]

R32 EVOMS intake For Sale thread.

[HideYoKids]

doing work

[Ericc.]

you bought it bruh?

[HideYoKids]

Paid half of it, and it's insured in my name. I get paid Friday, I'll pay the other half and plate it at lunch.

[Chaoz]

Brent!

Do you have an intake on your R? I'm looking to sell the EVOMS asap so I can move in a different direction.

Think it could work on my 24v? I was thinking it could

[Philip J. Fry]

Think it could work on my 24v? I was thinking it could

it doesn't look like there's enough space for the MKV .:R Evoms to fit on the MK4 24v, because of battery placement on the MK4.