*** INA Engineering : STEEL Oil Pan for 2.0 FSI | TSI Timing Belt Motor ***

[INA]

Hey Guys,
we are getting requests for a kicked out oil pan and we are doing a production run of steel oil pans for the 06A/06B motors and were thinking of doing one for the 06F motors (i.e. Timing belt 2.0 FSI | TSI motors ) which will have the following features:

• 0.7 quart kicked out section
• Steel Construction
• Plated to ensure longevity
• Did we mention made of steel?

For those wondering what our oil pan looks like:


How many of you would be interested in this?
1.
2.

[CoNGLoMeRaTeGTi]

looks great.

if i hit a pot hole and destroy my oil pan id def get one.

[dstang]

That doesn't look like steel to me.....looks more like Aluminum.

Looks like a good aluminum oil pan.

[INA]

That doesn't look like steel to me.....looks more like Aluminum.

Looks like a good aluminum oil pan.

Thank You
yes that is our aluminum pan for the 1.8T's . The steel version will be similar except it will not have the trap door design due to the large FSI oil pump.

[BETOGLI]

Looks sweet man!

[BETOGLI]

When are you planning to realize it? And how much is it going to cost?

Regards,

Beto

[INA]

When are you planning to realize it? And how much is it going to cost?

Regards,

Beto

Going to be around 350 USD and we are looking for a release date of February 2011

[BETOGLI]

Going to be around 350 USD and we are looking for a release date of February 2011

[skywalker38]

is it also possible to use it as a dry sump kit ?

[INA]

is it also possible to use it as a dry sump kit ?

We have a dry sump kit for the FSI available allready. You will have to mount the pump where your A/C compressor once was though.

[skywalker38]

We have a dry sump kit for the FSI available allready. You will have to mount the pump where your A/C compressor once was though.

do you have a photo of it,and how much will this set cost?
the reason why i want a dry sump is that i heard that there are sometimes problems with the original oil pump,do you know about this problem?
thanks for your reaction

[INA]

do you have a photo of it,and how much will this set cost?
the reason why i want a dry sump is that i heard that there are sometimes problems with the original oil pump,do you know about this problem?
thanks for your reaction

Sure
send over an email and I will take care of it for you.

[Sales@INA]

are the stock pans known to have oil starvation issues on the track like my vr6, or is this just to give a stronger pan w/ more oil capacity?

-m

There have been many instances when people have reported getting the dreaded oil warning. Most have been at the track but also during hard cornering on the street. The stock oil pump and balance shaft assembly is very bulky and takes up a big percentage of the stock pans oil capacity. Our pan adds a larger oil capacity so the pickup tube is less likely to be starved.

[BETOGLI]

do you have a photo of it,and how much will this set cost?
the reason why i want a dry sump is that i heard that there are sometimes problems with the original oil pump,do you know about this problem?
thanks for your reaction

+1, I would like to see some pics of the oil pan as well as its price!

Have a good one,

Beto

[Sales@INA]

+1, I would like to see some pics of the oil pan as well as its price!

Have a good one,

Beto

I do not have any pictures on this computer but you can click on our facebook page link in my signature. We have many pictures of our kits on there that are already uploaded.

[BETOGLI]

I do not have any pictures on this computer but you can click on our facebook page link in my signature. We have many pictures of our kits on there that are already uploaded.

Great! Thank you so much! And about the price?

Have a good one,

Beto

[Sales@INA]

Great! Thank you so much! And about the price?

Have a good one,

Beto

That is also on there

[BETOGLI]

That is also on there

Thanks, I'll check it out!

Have a good one,

Beto

[Sales@INA]

Thanks, I'll check it out!

Have a good one,

Beto

Let us know how you like it

[EL_3grab]

What about the engines with oil level sender ?

[Sales@INA]

They have provisions for the sender as well

[BETOGLI]

Let us know how you like it

Of course... I don't have a Facebook account (I closed it a long time ago) so I'll wait to see this in someones else's Facebook account! LOL!

[Sales@INA]

Of course... I don't have a Facebook account (I closed it a long time ago) so I'll wait to see this in someones else's Facebook account! LOL!

Ill find some pics for you

[BETOGLI]

Ill find some pics for you

Thanks... And yes please send me APM with pics and pricing for this if you are so kind!

[Sales@INA]

Thanks for the support

[BETOGLI]

I couldn't find the pics and prices of the Steel Oil Pan at Facebook!

[Sales@INA]

Hello Everyone!
Issam is on his honeymoon and will be back shortly. All orders placed will be processed upon his return. If you're checking the status of an already placed order, please send us an email at iabed@inaengineering.com and he will get back to you as soon as he can. If anyone has any product inquiries or tech questions, as always feel free to pm me.

Thanks
Isaac

[CLestat]

Work with FSI with NA oil pump?

[Sales@INA]

Happy Thanksgiving
From all of us here at INA Engineering

[Sales@INA]

Our Christmas sales are still going on!!!

[Sales@INA]