#1
Our ESP and Auto Hold button do not function. They will not light up and nothing happens when they are pressed... any ideas... 2008 3.6 4motion wagon... thanks
#2
Unitronic > APR Switched from APR to UNI and never looking back
CW '10 Passat 2.0TSI: UNI Stage 2 VMR V705 19x8.5 et45 Podi Boost gauge/pod AWE DV, Turbo Outlet Pipe BSH Boost Tap BillyBoat 3" TBE BFI Stg2 Dogbone/motor mount/trans. mount KW V2 coils Forge Twintake(1st on Passat/CC) JBL W12GTi MKII HEX+CAN vagcom, Podi.ca podi free ship code: NINOSHIP, VMR | Wheels velocitymotoring.com, VolksBHAN in September
#3
#4
Larry
Demokratikally Elekted Minister of Shekels of the Independent People's Republik of Offtopikstan
#5
I found that mine doesnt work all the time either. But there is a trick to it almost. I think it senses when on an incline. Keep your foot on the brake and press the button. As for the ESP idk what could be causing that to malfunction. They could be related and could not. GL![]()
BAG RIDERS | APR | MK6SOCIETY | TEAMV2 | CCW
#6
esp is on wen theres no car with the lines under it and to turn auto hold on u need tp make sure u have ur seat belt on. to turn off esp u need to hold the esp button. just couple ideas to try if u hvent already
GL
Unitronic Stage III w/ PT5558BB Turbo (What a difference UNI is from APR!!)Unitronic.ca,HPFP Upgrade Stage 1 pump, 3in.TBE, BSH throttle pipe/27mm RSB/Endlinks , Forge 007 DV , RalcoRC SS, 42Draft Design CNC Shifter bushings, N2MB WOT box, BFI stage 2 motor/tranny mounts, 034 Dogbone, Koni FSD shocks, Neuspeed springs/25mm FSB, Whiteline Anti-lift kit/Front control arm bushings, 18x8.5 VMR VB3s, JBL stereo, CTS Turbo 2.0t FSI Big turbo kit!
#7
BAG RIDERS | APR | MK6SOCIETY | TEAMV2 | CCW
#8
Unitronic Stage III w/ PT5558BB Turbo (What a difference UNI is from APR!!)Unitronic.ca,HPFP Upgrade Stage 1 pump, 3in.TBE, BSH throttle pipe/27mm RSB/Endlinks , Forge 007 DV , RalcoRC SS, 42Draft Design CNC Shifter bushings, N2MB WOT box, BFI stage 2 motor/tranny mounts, 034 Dogbone, Koni FSD shocks, Neuspeed springs/25mm FSB, Whiteline Anti-lift kit/Front control arm bushings, 18x8.5 VMR VB3s, JBL stereo, CTS Turbo 2.0t FSI Big turbo kit!
#9
Unitronic > APR Switched from APR to UNI and never looking back
CW '10 Passat 2.0TSI: UNI Stage 2 VMR V705 19x8.5 et45 Podi Boost gauge/pod AWE DV, Turbo Outlet Pipe BSH Boost Tap BillyBoat 3" TBE BFI Stg2 Dogbone/motor mount/trans. mount KW V2 coils Forge Twintake(1st on Passat/CC) JBL W12GTi MKII HEX+CAN vagcom, Podi.ca podi free ship code: NINOSHIP, VMR | Wheels velocitymotoring.com, VolksBHAN in September
#10
I didnt actually see that controller... I looked... Do you know what # it is by any chance? I will take a look again tonight, mabye I over looked it.
Holding down the ESP for a period of time does nothing to turn it off... its pretty much like its not functioning at all... I will try the suggested methods for the Auto Hold and let you guys know if it worked. Thanks for all the replies.
#11
On mine, the seatbelt has to be on to either turn ESP off or turn auto hold on.
#12
Also, ESP off light is in the dash, not on the button, just to clarify.
My auto-hold works when either moving or stopped and the light lights up on the button itself. But I've always had my seatbelt on.![]()
#13
samething happened to me back in march of this year, turns out to be the haldex control module. but mine was replaced under warranty and everything is working fine after. good luck!
#14
#15
Esp light is on and wouldn't turn off when I press the esp button. Happened a few time and the dealer said cannot replicate the problem. So I just simply drove in with the light on, and they told me its going to be a3 days job and gave me a loaner.
#16
I also know that if you have your autohold on and stopped at light or such. If you turn off ESP it will put your parking brake on.
#17
10 VW Passat Wagon
06 Audi A4 3.2Q
Previous: 04 VW T Red MK IV R32
#18
Both mine have just stopped working too, do they share the same fuse?
Sent from my iPhone using Tapatalk
#19
#20
It was a 5amp 2nd from front on drivers side, had burnt out, swapped it today and all worked sweet. My own fault really. My auto hold button broke, I tried to fix it myself, new button installed and still didn't work so eventually I found the fuse!
Sent from my iPhone using Tapatalk
#21
Could you please tell me which one, more exactly? Inside the car or below the hood?
Thanks