:: ECS Tuning :: ECS Wobble Bolts (14 x 1.5 x 27) - Now Available !!!

[ECS Tuning]

Click HERE to order or for more information.

ECS Wobble Bolts (14 x 1.5 x 27) - $3.99 each

ECS own conical seat wobble wheel bolt, conical seats fit most aftermarket wheels. Used for mounting

* 14mm diameter
* 1.5mm thread pitch
* 27mm length



Click here for video!

[Aonarch]

So these will let 114.3x5 wheels fit?

Also how long are our factory bolts? I always thought that they were 30+?

[ECS Tuning]

Correct, these will allow mounting of 5x114.3 wheels to a 5x112 car. OEM wheel bolts are 27mm long.

[Aonarch]

Correct, these will allow mounting of 5x114.3 wheels to a 5x112 car. OEM wheel bolts are 27mm long.

[djrockytharp]

Correct, these will allow mounting of 5x114.3 wheels to a 5x112 car. OEM wheel bolts are 27mm long.

so you can mount 5x114.3 without redrilling them?

[ECS Tuning]

Correct, these allow you to mount a 5x114.3 wheel on a 5x112 car without re-drilling them as long as a few criteria are met. The bolt holes on some JDM wheels are for 12mm studs, not 14mm wheel bolts, so in some cases the bore on the wheel bolt would need to be opened up / drilled out. The offsets on the wheels also need to be correct as it is not possible to run a spacer with these bolts, as these are the same length as a stock bolt.

[djrockytharp]

so as far as offsets whats a general number to stay around.

[ECS Tuning]

That all depends on the width of the wheel, what car they are being installed on, etc.. One reference or baseline point on the Mk5... 8.5" wide with et44 is pretty much flush in the front.

There are quite a few offset calculators available to help determine how offsets are changed by wheel width, etc... so I would say using one of those will be the best bet to try and determine the proper wheel width and offsets for a specific vehicle.

[djrockytharp]

cool I have a mk6 gti and just want to flush things out nothing too wild most likely 8" in the front and 9" in the back. what calculator do you recommend? I'm a total noob when it comes to fitment and offsets.

thanks for you help

[ECS Tuning]

This is the calculator I typically use, but I always just do a search on Google:

http://marksink.com/tire_wheel_offset/offset.html

Once you know the baseline of what width and offset is flush, you should be able to calculate any width / offset to get an idea of how much room you will have, and where the offsets need to be.

[djrockytharp]

thanks you really helped me out i really appreciate it.

[ECS Tuning]

[ECS Tuning]

ECS Tuning

[ECS Tuning]

Cleck out our new video for our wobble bolts.

[canes03]

do you have bolts that will allow you to put 4x99mm rims on a mk1 4x100? i believe the they are 12x1.5x27 for factory bolts. thanx

[ECS Tuning]

do you have bolts that will allow you to put 4x99mm rims on a mk1 4x100? i believe the they are 12x1.5x27 for factory bolts. thanx

Yes, in stock ready to ship!


http://www.ecstuning.com/Volkswagen-...lts/ES2142849/

[ECS Tuning]

[bdubsmk4turbo]

So are wobble bolts safe?

[ECS Tuning]

So are wobble bolts safe?

I have personally ran wobble bolts with three different set of wheels on my 06 GTI with no issues at all.

Have never seen any issues with others running them also. See our video below:




Andy

[dapucker1]

14x1.5 wobbles in black available?

[ECS Tuning]

14x1.5 wobbles in black available?

Sorry, unfortunately no black bolts available. We do carry caps that will work with the bolts -

[MIDNIGHTwanderer]

Are 27mm the only length to get them in? Is there a possibility to get a set of longer ones? Thanks

[ECS Tuning]

Are 27mm the only length to get them in? Is there a possibility to get a set of longer ones? Thanks

Just checked with our vendor - right now 27mm is the only length offered for wobble bolts.

[MIDNIGHTwanderer]

Just checked with our vendor - right now 27mm is the only length offered for wobble bolts.

[DUB_MANGv2]

im trying to mount a set of 17x8.5 et13 all around. will these bolts work for me on a mkv jetta (non gli) ?

[ECS Tuning]

im trying to mount a set of 17x8.5 et13 all around. will these bolts work for me on a mkv jetta (non gli) ?

They fit all 5x114.3 (14mm) wheels - Yes, please also check your hub bore to see what Hub Centric Rings are need if any.

[LAYINLOW]

I was looking at buying a set of these, however I am running 17 and 25mm spacers. So I guess I need to run adapters!?

[ECS Tuning]

I was looking at buying a set of these, however I am running 17 and 25mm spacers. So I guess I need to run adapters!?

These bolts will only work up to 5mm spacers / 20-30mm H&R DRA Series Wheel Spacers only.

[ECS Tuning]