"Low Dezl build"

**101vet** · 06-06-2011 08:23 PM

I OWNEN PAGE 3

15's are to big , I keep it old school 13/14's and i have a diesel pan just need the pump , but have eye balled oldschools pans...

**cxramire** · 06-07-2011 12:05 AM

Originally Posted by 101vet

I OWNEN PAGE 3

15's are to big , I keep it old school 13/14's and i have a diesel pan just need the pump , but have eye balled oldschools pans...

i would do 13" again but no more SUMITOMO tires so i will run my 15" and be as low as i would on 13" because when its on the ground its on the ground no matter what wheels are on it lol

**101vet** · 06-07-2011 11:08 PM

Originally Posted by cxramire

i would do 13" again but no more SUMITOMO tires so i will run my 15" and be as low as i would on 13" because when its on the ground its on the ground no matter what wheels are on it lol

This is true sir, I can drop it without really any rub now but the oil pan scraps and i need spacers in the rear forsure and the will rub,So if i go with a slightly less wide tire i should be tiits

**jsvr6nsd** · 06-10-2011 02:51 AM

corrado steelies are 15's and look sexy and I'm still low as ef.

**cxramire** · 06-11-2011 12:42 PM

fo sho jason when you gonna come to a meet?

**101vet** · 06-12-2011 02:14 AM

Originally Posted by jsvr6nsd

corrado steelies are 15's and look sexy and I'm still low as ef.

The only 15's i would run on a MK1 they are sexy especially when they got some lip on them...

**cxramire** · 06-13-2011 10:19 PM

Originally Posted by 101vet

The only 15's i would run on a MK1 they are sexy especially when they got some lip on them...

raddo steelies why not some turbos?

**cxramire** · 06-20-2011 03:35 PM

plans for "LOWDEZL"

1. registration is due lol at a low low price of $19.50 so ill be getting the custom plate
2. Get off my lazy BUTT and finish sanding my car down in the triple digit heat
3. clean the surface rust with this surface rust remover i found works real good and spray a light coat of primer on all of it
4. then wheel bearing all around been quoted $400 bucks for all four because they are press in.
5. then paint by the all mighty KAROL
6. 3" drop plates for the rear and a shorty oil pan both from oldskoolvw.com

**cxramire** · 07-05-2011 09:19 PM

GOT the THERMADOR CAR COOLER mounted

**jsvr6nsd** · 07-06-2011 04:11 AM

I'm jealous!!! I wanted one of those so bad, but soon I'll have real ac... and that is much better.

**Stilladub** · 07-06-2011 12:20 PM

Looks like a F!@#in' missile launcher lol! Does it work well? Is it an original unit?

**dmarian** · 07-06-2011 07:28 PM

Nice touch!

**97jetGT** · 07-08-2011 09:21 PM

Love the progress of your car man. That cooler is awesome!

**cxramire** · 07-09-2011 12:15 AM

Originally Posted by Stilladub

Looks like a F!@#in' missile launcher lol! Does it work well? Is it an original unit?

it is an original thermador got it from an old man in texas who bought it fourty years ago used it once then put it in storage.

works very well as long as there is little to no humidity

**cxramire** · 07-09-2011 12:17 AM

Originally Posted by dmarian

Nice touch!

Originally Posted by 97jetGT

Love the progress of your car man. That cooler is awesome!

thank you both if i can sell my dam 1998 golf i can get my rabbit painted

**cxramire** · 07-12-2011 12:09 AM

emissions time once again and guess what happened lol

my 1984 rabbit diesel rejected from emissions

reason why:

because its TOO LOW

who would of figured lol i was pretty much bottomed out when on the dyno

**jsvr6nsd** · 07-12-2011 12:21 AM

that's a bunch of bs... they tested my mk1 fine and I'm sure your not lower than me

**101vet** · 07-12-2011 01:27 AM

I don't have to smog my MK1..i love colorado..

**cxramire** · 07-12-2011 11:26 AM

Originally Posted by jsvr6nsd

that's a bunch of bs... they tested my mk1 fine and I'm sure your not lower than me

im pretty sure im lower then you jason you havent seen my rabbit since i put the extended strut towers on have you if you ever show up to a meet when i go you will have to check it out if your still in AZ that is

**cxramire** · 07-12-2011 11:27 AM

Originally Posted by 101vet

I don't have to smog my MK1..i love colorado..

lucky ill be in colorado all next week but wont have my mkI but ill be in my monster FJ

**101vet** · 07-13-2011 10:43 PM

Its great ripped all the cali emission hit out , no cat can't complain..lol...need to let know when you go to a meet so i can check out the front strut things

**cxramire** · 07-14-2011 10:29 AM

Originally Posted by 101vet

Its great ripped all the cali emission hit out , no cat can't complain..lol...need to let know when you go to a meet so i can check out the front strut things

will do man lol good thing about my diesel its full straight pipe then didnt put cats on the diesels ever but i need to upgrade it from 1inch i think it is to 2 inch

**cxramire** · 08-01-2011 11:45 PM

thank you bio diesel i fuking passed emissions haha

**boraIV** · 08-02-2011 01:03 AM

Nice. I love the Ronal Turbos, I just wish they came in 14s...

**cxramire** · 08-02-2011 01:11 AM

Originally Posted by boraIV

Nice. I love the Ronal Turbos, I just wish they came in 14s...

haha thanks me to i love them but 14 would be nice but ima tuck these ronals the hardest you will have to see them as the are right now still have 4inches of drop on my coils and they are gonna be sitting fender at wheel showing no tire lol

**EuroWerkShop** · 08-02-2011 11:25 PM

When you going to paint it? Im still in the middle of painting mine.

**cxramire** · 08-08-2011 09:17 PM

Originally Posted by EuroWerkShop

When you going to paint it? Im still in the middle of painting mine.

hopefully soon ima get it done at a shop i want it to be copper so i want it to look good

**cxramire** · 08-12-2011 11:33 AM

lol im stuck jk but i kind am
about paint just idk i really like it just metal and looking ruff so ima take the rest of the car down to metal and cruise it like that for a while and see how that goes

**cxramire** · 08-14-2011 11:58 PM

how low can you go? lol that is the question and i still have MORE LOW TO GO

about 4 inches more to be exact i may have to make it 2 and a half lol

**cxramire** · 09-01-2011 01:36 AM

euro bumpers gone

OEM snowflakes on the way

and no im not getting rid of my turbo's lol ima use them for shows

**101vet** · 09-05-2011 01:50 AM

So after seeing these pics i went and got a cig pack and did the samething, i'm alot lower then i thought.... I have just under a quarter inch on top of the height of the cig pack...Not bad for just coils and i'm not as low as i can get..... Need that oil pan first....

what size tires are you running on the 15' rims? found some i like but not sure what size tires toget....

**vento86** · 09-05-2011 03:44 AM

thats not low.. this is low. and i daily drove this thing

nice project. its good to see mk1s on the road(when its finished)

**cxramire** · 09-05-2011 01:50 PM

Originally Posted by 101vet

So after seeing these pics i went and got a cig pack and did the samething, i'm alot lower then i thought.... I have just under a quarter inch on top of the height of the cig pack...Not bad for just coils and i'm not as low as i can get..... Need that oil pan first....

what size tires are you running on the 15' rims? found some i like but not sure what size tires toget....

nice nice and im running 165/50/15 on my turbo's

**cxramire** · 09-05-2011 01:52 PM

Originally Posted by vento86

thats not low.. this is low. and i daily drove this thing

nice project. its good to see mk1s on the road(when its finished)

nice nice i daily mine as well 90 miles a day or more and question what size wheels you running ? and have you notched your frame?

**vento86** · 09-05-2011 11:48 PM

Originally Posted by cxramire

nice nice i daily mine as well 90 miles a day or more and question what size wheels you running ? and have you notched your frame?

13x7 et 13 centra pepper pots

and the axle rubs a bit but with the high et it rubs the fenders more than anything.

VWVortex

Thread: "Low Dezl build"

Thread Tools

Search Thread

Display

Posting Permissions