Oil cap is sitting funny
Fuel lines are done for now
New ball joint
Under shot of the inter cooler piping
034 solid sub frame bushings
And now its having problems starting let the fun begin
Good luck Alex click on link for video
and now it runs every thing is good just getting rev hang
click the link for the video sorry about the quality of the video it aint my phone
Last edited by 01ttgt28; 04-10-2012 at 12:37 PM.
Brett Had to go show of your polished ass
New pics she is finally on here feet
See looks kinda high coils haven't come in yet I might have to go to dust off on the h&rs
Alex just sent me a new pic Haldex fresh paint looks new again
I read all this, awesome build, I'm watching
I had the same problem with my oil cap, take it apart, cut new notches in it and clue it back together then put it back in lol. There's a DIY somewhere buy pretty self explanatory.
FrankenTurbo F21, CTS Frount mount, Genesis 550cc, Bosch 044, Wiseco pistons, IE Rods, all held together with ARP, 3" 42DD TBE, 2 quarts of my blood, Southbend Stage II, Peloquin LSD, taken care of with Eurodyne ME7.
Contact Mike P. @ Stevebilt for anything you need.
haldex is in injectors are leaking alex ordered new orings
Another new part its of the a4 hope it fits
fuel pump install kit from c2 motorsports
Last edited by 01ttgt28; 04-13-2012 at 08:24 AM.
I've had an ARP headbolt come loose...... drives side rear corner. I'd check them after a couple cycles to be sure.
Also whenever you are torquing go over each step twice, because the #1-5 bolts will have lost their torque as the gasket compresses by the time you hit #10. Trust me, you'll feel it and see it on your torque wrench.
all set pump is in injector orings replaced. alex is taking it for a test drive
Just paid for a new part can't wait for it to come in its sexy
Great deal from burk_art