>> BAG RIDERS Deal Of The Month <<

[98DUB]

Whats the switchspeed to e-elevel upgrade like? Just the ecu, controller, and sensors?

[choey]

Whats the switchspeed to e-elevel upgrade like? Just the ecu, controller, and sensors?

http://bagriders.com/modlab/products...GRADE-KIT.html

This is hidden in the other parts under the accuair tab

[Andrew@ORT]

The SwitchSpeed to e-Level upgrade includes everything you'll need to make the switch:

Sensors
Wiring
Hardware

Although, due to the way AccuAir sells the kit, you will need to send them your controller and your ECU for reflashing. Their theory on the matter is that in the time it takes you to install the e-Level upgrade, they can reflash everything and have it back in your hands by the time you're ready to put the car on the ground.

+ Price of the upgrade is also dependent upon whether or not you already have the electronic pressure sensor

[98DUB]

The SwitchSpeed to e-Level upgrade includes everything you'll need to make the switch:

Sensors
Wiring
Hardware

Although, due to the way AccuAir sells the kit, you will need to send them your controller and your ECU for reflashing. Their theory on the matter is that in the time it takes you to install the e-Level upgrade, they can reflash everything and have it back in your hands by the time you're ready to put the car on the ground.

+ Price of the upgrade is also dependent upon whether or not you already have the electronic pressure sensor

So they can have the ecu and controller back in a day?

[Andrew@ORT]

So they can have the ecu and controller back in a day?

Highly doubt that and I've voiced that concern several times. This is why when we sell an upgrade kit we have a loaner ECU/touchpad that we send out. Granted, we do take a fully refundable deposit, but this way our customers are never completely down and out (no pun intended).

[Will@BagRiders]

So they can have the ecu and controller back in a day?

Perhaps not, but that's why we have loaner units

[phil123]

So they can have the ecu and controller back in a day?

If you drive down to them i'm sure they can

[harlequin80]

How much pressure are we talking about here? Plenty of cars are a little off (5psi higher on one corner to get an even wheel gap).

Only by about 5-10psi.

My question about the v2 was since its pressure based how does it level the car out without knowing if the car is sitting the same height all around? It just evens the pressure out on all 4 corners correct? So wouldn't that make the car sit uneven if one bag needed less pressure to sit level?

[Will@BagRiders]

Only by about 5-10psi.

My question about the v2 was since its pressure based how does it level the car out without knowing if the car is sitting the same height all around? It just evens the pressure out on all 4 corners correct? So wouldn't that make the car sit uneven if one bag needed less pressure to sit level?

Lets say you are setting preset 1. The V2 saves a pressure value for each of the four corners of the car. If your car happens to be uneven when comparing the passenger side fender to ground height vs. the drivers side fender to ground height, when both front air springs have 55 psi in them, then you could take a tape measure out and dial them in to the exact same height be adding or removing pressure. (Keep in mind you should verify that both struts are installed correctly before resorting to this). Once the desired height has been reached, you would then save the preset.

When you hit the preset 1 button, the AutoPilot V2 will return your four air springs to the pressures that you saved. Assuming you have the same load in the car when you hit that preset button, the heights at each corner of the car should be the same as they were when you saved the preset.

Saving and returning to a preset needs to be done on level ground for maximum accuracy.

[Will@BagRiders]

If you drive down to them i'm sure they can

That's one way to do it

[harlequin80]

Makes sense but when someone said auto leveling I was thinking like e-level. That's what didn't make any sense is that it was said to level based on pressure. It's basically like Auto pilot then

[MechEngg]

Makes sense but when someone said auto leveling I was thinking like e-level. That's what didn't make any sense is that it was said to level based on pressure. It's basically like Auto pilot then

Yeah it isn't auto levelling

It has the function of preset ride pressures. I guess that would be the technical term there. Exactly the same as Autopilot version 1 but with a different controller, different control philosophy, different manifolds and more presets. But still the same theory of preset ride pressures

[harlequin80]

Yeah it isn't auto levelling

It has the function of preset ride pressures. I guess that would be the technical term there. Exactly the same as Autopilot version 1 but with a different controller, different control philosophy, different manifolds and more presets. But still the same theory of preset ride pressures

Thats what I thought. Someone on the previous page made it sound like it was autoleveling but based on pressure not ride height which made no sense

[Will@BagRiders]

Thats what I thought. Someone on the previous page made it sound like it was autoleveling but based on pressure not ride height which made no sense

Correct, the AutoPilot it doesn't 'auto level' per say. It will automatically reach the set pressures but pressures don't necessarily correlate to the vehicle being level. This is where the advantages of height based presets (e-Level) come in to play.

[Will@BagRiders]

[phil123]

Any sort of status on the touchbox for Android?

[Will@BagRiders]

Any sort of status on the touchbox for Android?

I last heard they would be released in early 2013. (Hopefully January).

[Will@BagRiders]

[Will@BagRiders]

Our next deal of the month is about to be launched

[crispy21]

What is it? Deals on airhouse 2 bags and airlift fronr slam xl struts??

[Will@BagRiders]

What is it? Deals on airhouse 2 bags and airlift fronr slam xl struts??

Air Lift front Slam XL struts will be on sale along with several other products and kits. The AH2 bags will not be on sale.

[crispy21]

Cool thanks

[Will@BagRiders]

Cool thanks

No problem

[niles]

Our next deal of the month is about to be launched

[Will@BagRiders]

...

[dubb34r]

Great deals as always guys. Glad I picked up my V2 kit couple months back during the deepest discount you've had on it since launch. Also amazing customer service/tech support from Will, Rali and team.

[Will@BagRiders]

Great deals as always guys. Glad I picked up my V2 kit couple months back during the deepest discount you've had on it since launch. Also amazing customer service/tech support from Will, Rali and team.

[Will@BagRiders]

These setups will be in stock at H2O International in OCMD! See you there

[Will@BagRiders]

[03_uni-B]

Great deals as always guys. Glad I picked up my V2 kit couple months back during the deepest discount you've had on it since launch. Also amazing customer service/tech support from Will, Rali and team.

ya, i really hope they will be running something similar in nov/dec. thats when i plan on buying.

[eurolicious]

ya, i really hope they will be running something similar in nov/dec. thats when i plan on buying.

Same here

[Rali@BagRiders]

Out with the old and in with the new!

[03_uni-B]

exactly what i was looking for. should be ready to order late oct. hyped.

[Will@BagRiders]

exactly what i was looking for. should be ready to order late oct. hyped.

[Will@BagRiders]