:| INA : 2.5 20V Oil Control Packages - Oil Cooler Kits | Billet Valve covers & More |:

**itskohler** · 05-31-2011 10:40 AM

Just for good measure...

STAGE 1- PRICE: $79 USD + Shipping (add an extra $7USD for SS Oil filter housing hardware)
INA Engineering T6061 adapter plate
(2) 1/2" BSP to 10-AN fittings
(4) M8 x 1.25 x 20mm SS socket cap screws
(5) M8 x 1.25 x 50mm SS socket cap screws (for oil filter housing - optional)

Bad grammar got the best of me.

There was a group buy posted somewhere else in the forums and I got confused, posted that question in this thread.

Still need the grease?

**Sales@INA** · 05-31-2011 11:53 AM

I hope everyone enjoyed their long weekend

**spartanrabbit09** · 06-01-2011 09:03 PM

VC!

**ThEnergizer** · 06-02-2011 05:00 PM

Originally Posted by Sales@INA

I hope everyone enjoyed their long weekend

Please check your private messages. Thanks.

**INA** · 06-02-2011 08:15 PM

Guys , in order for billet valve covers to happen we need commitment . That simple...

**ThEnergizer** · 06-02-2011 09:35 PM

Originally Posted by INA

Guys , in order for billet valve covers to happen we need commitment . That simple...

Please check your private messages. Thanks.

**INA** · 06-03-2011 01:24 PM

Originally Posted by ThEnergizer

Please check your private messages. Thanks.

Replied to your messages.
Again. We need commitment not hopes and dreams.

**thygreyt** · 06-03-2011 03:13 PM

Originally Posted by INA

Replied to your messages.
Again. We need commitment not hopes and dreams.

guys, please contact me!

954 471 2709...

issam, i'm waiting for your email answer on how to proceed..!

i need rods..!!

and i wont buy em from no one else.

oh, btw, guys, feel free to contact INA if you are looking for internals, i know they have em.

**ThEnergizer** · 06-03-2011 08:42 PM

Originally Posted by INA

Replied to your messages.

Replied back.

**spartanrabbit09** · 06-03-2011 08:58 PM

Originally Posted by INA

Guys , in order for billet valve covers to happen we need commitment . That simple...

i will take one ASAP send the bill

**Rad-Rabbit** · 06-03-2011 11:40 PM

INA: You have not replied to my PM requesting a price quote. I have interest and likely will buy, but I can't commit without a definite price?
Thank you

**nunumkv** · 06-04-2011 03:52 PM

Originally Posted by Rad-Rabbit

INA: You have not replied to my PM requesting a price quote. I have interest and likely will buy, but I can't commit without a definite price?
Thank you

Pretty much what he said I even called you guys an said just to post here I want VC I sent pm's as well. So waiting on more info on what I have to do to make purchase. Just PM me back or call me 813-469-1016.

**thygreyt** · 06-04-2011 04:12 PM

its all on the fb page

Originally Posted by eurojet development

ONLY 10 available! 2.5 valve cover & catch tank combo for $569
-contact Jeff@stasisengineering.com to order!

**nunumkv** · 06-04-2011 04:33 PM

Originally Posted by thygreyt

its all on the fb page

never made a FB lol, Thanks man

**thygreyt** · 06-05-2011 02:05 AM

No worries. Now, buy it! Lold

**nunumkv** · 06-05-2011 02:07 AM

Originally Posted by thygreyt

No worries. Now, buy it! Lold

I will forsure! going to be my B-day present for myself!

**thygreyt** · 06-06-2011 12:27 AM

Originally Posted by nunumkv

I will forsure! going to be my B-day present for myself!

you wot regret it!

**spartanrabbit09** · 06-07-2011 03:13 PM

pulled the trigger

**thygreyt** · 06-07-2011 03:34 PM

Originally Posted by spartanrabbit09

pulled the trigger

awesome!

thats one less...!

remember, use the thread i made in order to install it.

**spartanrabbit09** · 06-07-2011 03:53 PM

Originally Posted by thygreyt

awesome!

thats one less...!

remember, use the thread i made in order to install it.

both your threads will be helpful (side engine mount and now the VC)

I cant wait get these in

**nunumkv** · 06-07-2011 04:29 PM

Originally Posted by spartanrabbit09

both your threads will be helpful (side engine mount and now the VC)

I cant wait get these in

TONIGHT should be the night i order

**thygreyt** · 06-07-2011 04:55 PM

makes me happy to see the product moving...

**nunumkv** · 06-07-2011 06:42 PM

payment made

Cant wait.

**INA** · 06-07-2011 09:07 PM

Joel @ EJ is happy and so are we

**spartanrabbit09** · 06-07-2011 09:11 PM

Originally Posted by INA

Joel @ EJ is happy and so are we

whats next for the 2.5 (me)

**thygreyt** · 06-07-2011 09:35 PM

Originally Posted by INA

Joel @ EJ is happy and so are we

that makes me happy too...

**kevin splits** · 06-07-2011 09:38 PM

Good now pass along the got damn header so I can buy one

**Sales@INA** · 06-12-2011 10:18 AM

Originally Posted by kevin FaKiN spLits

Good now pass along the got damn header so I can buy one

**kevin splits** · 06-12-2011 11:15 AM

Originally Posted by Sales@INA

LoL ya now I need one

I put the car up for sale and a couple locals wanted some parts so I sold my porsche brake setup I didnt even get to use, evo header and hf cat dp, st's, motor mounts, and the mishi. Then I was talked into keeping it, so now I've got like 3k I need to spend to basically get that stuff back. I'm gonna bite the bullet and get the c2 kit, but I want this header for the jetta.

**pennsydubbin** · 06-12-2011 12:11 PM

Originally Posted by kevin FaKiN spLits

LoL ya now I need one

I put the car up for sale and a couple locals wanted some parts so I sold my porsche brake setup I didnt even get to use, evo header and hf cat dp, st's, motor mounts, and the mishi. Then I was talked into keeping it, so now I've got like 3k I need to spend to basically get that stuff back. I'm gonna bite the bullet and get the c2 kit, but I want this header for the jetta.

Did you try to fit the Mishi before you sold it? Just wondering if it ended up fitting. Sucks that your plans changed after selling the stuff, but if you get the C2 kit I don't think you'll regret it. Can't wait till I get it on my car

**kevin splits** · 06-12-2011 12:27 PM

Originally Posted by pennsydubbin

Did you try to fit the Mishi before you sold it? Just wondering if it ended up fitting. Sucks that your plans changed after selling the stuff, but if you get the C2 kit I don't think you'll regret it. Can't wait till I get it on my car

Fitment wise it barely fit. The bungs are just a hair to thick for the clip to make an air tight seal. Im going to buy another and make it fit. Im keeping it because I decided to wait till I can test drive the golf r before I commit to a mkv r

Ya I was like well, should I spend 1k on another evo header or 2k on a turbo kit... The funny thing is the car pulls just as hard, and seems just as quick with the stock header as it did with the evo! LOL so this is what is steering me away from n/a.

I wanna do this oil cooler too, but I need to know more about these expensive o-rings I need? All I need is the stage 1 kit, I have the rest

**darkk** · 06-12-2011 06:34 PM

Originally Posted by kevin FaKiN spLits

I'm gonna bite the bullet and get the c2 kit.

Originally Posted by pennsydubbin

but if you get the C2 kit I don't think you'll regret it. Can't wait till I get it on my car

happy happy joy joy

**pennsydubbin** · 06-12-2011 07:45 PM

Well that's good that if fitted/sorta fitted - just wanted to make sure the measurements I gave you were good

I think it's a good decision to wait for the golf r. The vr sounds awesome, but I think the golf r will be so much better with that 2.0t coming in it. In the mean time though, id spend the extra 2k if you got it for the turbo over the header

**Rad-Rabbit** · 06-13-2011 11:54 PM

If anyone would like to sell me their OEM 2.5l intake manifold please private message me.

**nunumkv** · 06-22-2011 09:19 PM

delay on the cans?

VWVortex

Thread: :| INA : 2.5 20V Oil Control Packages - Oil Cooler Kits | Billet Valve covers & More |:

Thread Tools

Search Thread

Display

Posting Permissions