Pittsburgh V.2

[scirockalot8v]

^those are scary. they will back out and come loose.
this stuff is good.

[VdubXXIV]

saw you check in at Blush, I was a couple streets over and was goona hit you up, but I went home since I have a bachelor party tonight.

Next time

[VdubXXIV]

Stanced trail blazer... no big deal

[blizzardVR6]

Ordered a Countryman today. The Audi A3 is officially up for sale!

congrats? i liked the A3 meself but no, i cannot afford it lol

Blahhhhhhhhhh, got way to hammered at the titty bar last night

congrats! excellent

Bout to lower a trail blazer

see face book post(s)

[bizybyker]

Once its all clean metal, then we can do sealer/weldable primer with zinc, then do the final welding.

Your welding on zinc primer? We had a job come in where every freking piece had that crap on it and they ended up having us grind it all out of the weld area because it kept giving porosity and not to mention the hanous fumes that it produces can f you up and cause tooth decay, hope your drinking lots of milk if your welding on galvanized (any metal coated in zinc). What wire are you running?

[18T_BT]

^those are scary. they will back out and come loose.

why are they scary? i used loctite, went for a spirited drive, came back, and all was tight still. yes, i pulled the rims off again to make sure the studs were tight...

[BEANS]

Something similar to this. primer

.030 is all I weld with

[bizybyker]

Well welding on sheet with light application it probably does weld fine we had 7,000 pound I beams coated in the stuff (not sure exactly what kind but it was a zinc primer) and it was quite thick so welding on it was just crap, it poped and blew junk everywhere, after one pass the cup would be full of spatter, hate that stuff...
And I ment what kind of wire, I assume er70s-6?

[scirockalot8v]

why are they scary? i used loctite, went for a spirited drive, came back, and all was tight still. yes, i pulled the rims off again to make sure the studs were tight...

used them to bolt my adapter to a while back. after about a week or so i felt a wobble in the wheel. 3 were loose. checked all 4 corners and atleast 1 or more was loose. i ended up just using the stock wheel bolts to bolt the adapters on. a friend of mine used them on his e30 and he had the same issue. its more prone with aluminium wheels.

[18T_BT]

used them to bolt my adapter to a while back. after about a week or so i felt a wobble in the wheel. 3 were loose. checked all 4 corners and atleast 1 or more was loose. i ended up just using the stock wheel bolts to bolt the adapters on. a friend of mine used them on his e30 and he had the same issue. its more prone with aluminium wheels.

why would it be more prone with aluminum wheels? did you clean out the old threads real good with brake cleaner before install or use loctite? i guess i will see if i have the same fate. i hope not, it's much easier to swap wheels this way and i like these studs so far...

[kidshorty]

damn nice Val

[pdoel]

congrats? i liked the A3 meself

Yeah, I like the A3 too. It wasn't an easy decision. I had planned on keeping the A3 a long time. But since the Countryman came out, I couldn't stop thinking about it. IMO, it's the perfect solution to the fact that you can't get an A3 with quatro and a manual.

[scirockalot8v]

i would just watch them.

[sciroccojoe]

damn nice Val

moar low would make you go a lot faster

[. W e r d n a]

Speaking of moar low....

[dubhuman]

you can't get an A3 with quatro and a manual.

this, midaswellgetatdisportwagen. gl with the not so mini.

bliz do you want to attack the breaks on the gti later this week/end?

[steveo27]

Speaking of moar low....

Hey pal, you wanna fuckin lower it?

You missed a good time today.. We grilled out, drank beer, worked on Kelsey's car, and Mike's truck.

[. W e r d n a]

Hey pal, you wanna fuckin lower it?

You missed a good time today.. We grilled out, drank beer, worked on Kelsey's car, and Mike's truck.

Work kills any and all fun

Heard Kelsey is ready for moar low too

We'll get together again this week, I owe you and mike some , car handles like dog **** without the swaybar links bolted

[scirockalot8v]

worst thing i ever did was remove the swaybar.

[eurovw95]

sold one of the toys last night and i think I just may invest some money on the mk3 i think its at least time to get it drivable and reliable again

[Heathcliff Huxtable]

putting money into a mk3 (or any car) isn't an investment :{P

[eurovw95]

meh.. its either get it running/reliable and run the piss out of it. or let it continue to set and collect leaves likes its done the past 2 years..

[. W e r d n a]

worst thing i ever did was remove the swaybar.

I upgraded to the R32 sway bar... It's on right now, just need to order new links for it.

[18T_BT]

moar low would make you go a lot faster

that's my rally look

i have stock suspension on there for the time being (obviously), until i figure out what spring rates I want to run...

[RaraK69]

that's my rally look

i have stock suspension on there for the time being (obviously), until i figure out what spring rates I want to run...

I would be pretty embarrassed if i were you, you may just want to get some racelands and redeem some scene cred before you are driven out by the mk4 forum.

[jagt21VR6]

hey pdoel, I figured you would go for the more expensive, goodwood edition

[18T_BT]

I would be pretty embarrassed if i were you, you may just want to get some racelands and redeem some scene cred before you are driven out by the mk4 forum.

[blizzardVR6]

bliz do you want to attack the breaks on the gti later this week/end?

werd, hit me up

[pdoel]

hey pdoel, I figured you would go for the more expensive, goodwood edition

I've never had to pay for good wood, and not about to start.

[blizzardVR6]

I've never had to pay for good wood, and not about to start.

for 52k it better be double ended platinum and diamond encrusted for your pleasure, tho all the cornsilk should help when if your feeling a lil retentive

[scirockalot8v]

quote of the day comes from a little black boy at mcgee hospital..."my voice is in my mouth." his dad asked him to use his "inside" voice. pretty funny.

[steveo27]

meh.. its either get it running/reliable and run the piss out of it. or let it continue to set and collect leaves likes its done the past 2 years..

supercharged 2.0 auto huh?

[veedubtek]

absolutely LOVE the vokoun signing. he was beast with FL, with no support...didn't thrive with the caps, but still shut us out. awesome 1b netminder that can easily handle 30+ games so flower isn't overworked. love ya bj, but it's time to go.

[jagt21VR6]

yea man he always tore us up, I agree he will def be better then johnny was this year, however he must not of been palying well to be behind neuvirth and holtby, time will tell, if he has a good offseason it could prove to be huge, the way I see it is they did this not because had they had a better back up they wouldve started him over fleury in the playoffs, but more so that throughout the season wed have more confidence in our backup, play him more, and fleury would get more rest throughout the year...

[Heathcliff Huxtable]

eh, a 35 year old dude with a blown out groin. glad they maxed him at 2 years.