Looks like a good start I want to see more
My caddy build
Haven't updated this in a while,
First off after a long search i finally found a carb manifold for the 8v, really stoked on that
Got a harness and a new alt set up,
A bunch of other parts too, just littering my room.
Did wheel bearings, cleaned up the coil-overs and put the breaks on
Cleaned and painted rear beam, drums, and C-arms
Had Cole (bajacole) disassemble the doors
Took a trip to industrial metal supply, picked up some 3/16 steel
Still have to do the drain plug
Took off the undercoating out of the inner fenders to prep for a patch
Found a bad spot and fixed it,
Accidentally pulled up the passenger sound deadening in one piece found this underneath...
Cleaned it up and found out its not as bad as it looks, still bad enough for me to get a pan though, even just to cut a patch out of.
Decided to take up the rest of it just to make sure this was the worst of it. Got the drivers side off and its looking promising. Don't want to get my hopes up though...
Thanks for reading
liking this so far. Keep it up
CADDY SUPPORT GROUPS http://www.facebook.com/pages/Caddy-...0827989?ref=hl http://www.caddypan.com/