***CTS MK5 FSI 2.0T BT Kits & Fueling Specials***

[CTS Turbo]

Looking for 300-450WHP? We have what you need. Turbocharger options, you want Billet? We have what you need. You want ceramic ball bearing? We have that. You need 200 Autotech HPFP's? We have those too. CTS Turbo MK5 FSI BIG turbo kit





Garrett Turbo Options:
Garrett GT3071R
Garrett GT3076R
Garrett GT3582R
Garrett GTX3071R
Garrett GTX3076R
Garrett GTX3582R

Precision Turbo Options (Billet Compressor Wheel Equipped)
Precision HP5557SP-B (ceramic ball bearing)
Precision HP5857SP-B (ceramic ball bearing)
Precision HP6262SP-B (ceramic ball bearing)
Precision HP6765SP-B (ceramic ball bearing)


The CTS Turbo 2.0T FSI kit includes but is not limited to the following:

CTS Turbo proprietary exhaust manifold
Precision or Garrett turbocharger (you choose!)
Precision 39mm external wastegate
CTS 3" stainless steel downpipe (yes ours is the nicest)
CTS stainless steel oil feed line kit
CTS stainless steel oil drain kit
CTS 3" Turbo inlet pipe (3.5" optional if you require)
Gasekets, nuts, studs, clamps, silicons, heat wrap and more.

Want a video? 1 bar boost pressure closed course


Need a clutch? We have them in stock $1,255 shipped - Clutch Masters FX400 - What we run on our MK5 FSI and MK6 TSI


Need RS4 fuel injectors? $399 shipped - We have 100 IN STOCK on our shelves


Need Autotech HPFP? We have 200 on the way to us from Autotech


Who the heck stocks this much cool stuff? CTS Turbo, check out our blog for the latest activity: www.ctsturbo.com

[CTS Turbo]

[$GTI07$]

Nice guys. That kit looks real good.

[CTS Turbo]

You can buy one if you want to!!

[GTI4john74]

hi Clay,

question regarding the WG that comes with the kit, whats the max bar the WG can handle?? is it up to 1.5 bar or more?? is this also a 39mm WG??

thanks!
John

[CTS Turbo]

hi Clay,

question regarding the WG that comes with the kit, whats the max bar the WG can handle?? is it up to 1.5 bar or more?? is this also a 39mm WG??

thanks!
John

The kit uses a 39mm PTE WG, that comes with a variety of springs, as for the max pressure spring/combo in the wg, I'm not 100% sure. We usually set them to 1 bar and use a MBC or N75 to control boost.

[GTI4john74]

The kit uses a 39mm PTE WG, that comes with a variety of springs, as for the max pressure spring/combo in the wg, I'm not 100% sure. We usually set them to 1 bar and use a MBC or N75 to control boost.

hi Clay,

thanks for the reply, so does your shop car GTI MKV run on MBC or uses the N75 to control boost???

Just trying to figure out which one's better,

Bigger Turbo / Small WG = more boost ---> more power at high rpms ?
Bigger Turbo / Bigger WG = less boost ---> more power at low rpms ?

Is an MBC better or N75 to control boost???

Also, how does one achieve 450whp on the kit on 94 octane without w/m or is w/m required to reach that power level???

Thanks,
John

[amckernon1028]

wow im in for injectors, I also need a set of IE rods. I am half way there and can't wait. Are you going to be at WF? Just looking to save $ on shipping.

Your kit will be on my car i a few months too, I am slowly putting stuff together and this winter its on in my garage.

[CTS Turbo]

wow im in for injectors, I also need a set of IE rods. I am half way there and can't wait. Are you going to be at WF? Just looking to save $ on shipping.

Your kit will be on my car i a few months too, I am slowly putting stuff together and this winter its on in my garage.

We're still contemplating WF...it's a huge trek for us since we're on West Coast of Canada and bringing down a booth with samples/merch/etc is a logistical nightmare.

We may just fly down there and hang out at someone else's tent

Shoot us down and email and get your order in, brother...those FSI injectors are flying off the shelves.

[CTS Turbo]

hi Clay,

thanks for the reply, so does your shop car GTI MKV run on MBC or uses the N75 to control boost???

Just trying to figure out which one's better,

Bigger Turbo / Small WG = more boost ---> more power at high rpms ?
Bigger Turbo / Bigger WG = less boost ---> more power at low rpms ?

Is an MBC better or N75 to control boost???

Also, how does one achieve 450whp on the kit on 94 octane without w/m or is w/m required to reach that power level???

Thanks,
John

John, we tried both and found that it runs a lot smoother on N75 and MAF.
450WHP you may not need meth but you will need a controller for the low-pressure fuel pump.

[GTI4john74]

John, we tried both and found that it runs a lot smoother on N75 and MAF.
450WHP you may not need meth but you will need a controller for the low-pressure fuel pump.

thank you

John

[CTS Turbo]

Tried to go grocery shopping last night.

Cops had other plans.



www.ctsturbo.com

[CTS Turbo]

Our FSI BT Kit in action.

[CTS Turbo]

www.ctsturbo.com - CTS blog for latest developments

[CTS Turbo]

Pre-Orders are shipping and we still have a few more left.

Hit up our online store and get your order in!

[CTS Turbo]

[CTS Turbo]

Please check out our blog and facebook for the latest updates: www.ctsturbo.com & www.facebook.com/ctsturbosystems

[wazzap1101]

Very very nice

[CTS Turbo]

We still have some in stock! Whatchu know about going fast?!

[CTS Turbo]

Please check out our blog and facebook for the latest updates: www.ctsturbo.com & www.facebook.com/ctsturbosystems

[CTS Turbo]

[CTS Turbo]

[CTS Turbo]

[CTS Turbo]

[CTS Turbo]

Dear Santa,
this Christmas I would like the followings:
A kit good for over 450 horses from the guys at CTS
....

Ok here's a scoop guys, Rudolph developed a drinking habit (that red nose isn't magic...) so Santa had to switch to a Eurovan diesel for deliveries. Unfortunately it's pretty cold around the north pole and Santa has no electricity to plug his van in. Save your car the deception when she finds that out on the faithful morning and order from www.ctsturbo.com , we ship everyday, worldwide and no matter the weather!

[bostonaudi1]

Fun video, impressive straight line speed, but you know what happens when a corner comes up - the GTI understeers badly, goes off road and explodes into a farmer's hay bale - sending hay everywhere, while the 335i carves nicely and waves goodbye.

[CTS Turbo]

Fun video, impressive straight line speed, but you know what happens when a corner comes up - the GTI understeers badly, goes off road and explodes into a farmer's hay bale - sending hay everywhere, while the 335i carves nicely and waves goodbye.

Thanks for the heads up, lets go compare some more apples and oranges.

[bostonaudi1]

Thanks for the heads up, lets go compare some more apples and oranges.

not knocking your work at all, but recently drove a 335i, so could not resist admitedly unneccessary comment. 335i is helluva car! Kudos to your work as well!

[CTS Turbo]

not knocking your work at all, but recently drove a 335i, so could not resist admitedly unneccessary comment. 335i is helluva car! Kudos to your work as well!

I agree, they are great. I drove a 135 to the shop today that we're doing a CTS 335 FMIC kit install on. We like cars that are fast, we don't discriminate against brands.

[MKjiVe]

Do you guys sell oil and coolant lines for the 3071r separately? Ill be needing those and injectors pretty soon.

[_leo_]

has CTS considered a longet final drive ratio replacement or a 6 speed TDI tranny swap for BT 2.0Ts?

ive always hated how short the ratios were in my 07GTI even my golf R seems like its wasting alot of time with the lower gears

[CTS Turbo]

has CTS considered a longet final drive ratio replacement or a 6 speed TDI tranny swap for BT 2.0Ts?

ive always hated how short the ratios were in my 07GTI even my golf R seems like its wasting alot of time with the lower gears

We haven't looked into that, far too many projects on the go. The police here are very strict when it comes to enforcing speed limits.

[CTS Turbo]

Ordering online? If you are don’t forget to look in the bottom of your box for summer swag. Lucky customers will receive CTS Summer Swag… which could include T-Shirt (you mad bro?), CTS coveted bottle opener, CTS Lanyards, and CTS plate frames. Sneak peak of Summer Swag goodness: