:| INA - 1.8T to 2.0T Coil Pack Adapters (TECH & FAQ) - INTRO PRICING |:

[INA]

*** 1.8T to 2.0T Coil Pack Adapter Plates ***

You asked,we listened!
Just wanted to say thank you to the community for giving us the opportunity to take these from design to production and in the process being able to help out where we could.

For those who are wondering what we are talking about, here is the original thread.

We are going to be making 2 versions.
V1.1 is for use with Coil Pack hold down units and V1.2 is for use similar to how OEM is set up so please specify which you want when ordering.
We only took a sample photo of the raw machined units. All pieces will be cleared anodized unless specified (we can offer blue and black anodized as well).



PACKAGE INCLUDES:

• (4) Coil Pack adapters machined from high quality Canadian T6061 Aluminum
• (8) M6 x 20mm SS socket cap screws

VWVORTEX PRICE : $89 USD SHIPPED

Ready to Purchase? No Problem! .CLICK HERE or Jump on the list below
We are accepting payment via paypal so please follow the instructions in the box below:

When making payment with paypal please include the following:
Full Name :
Forum Screen Name:
VERSION : Specify V1.1 or V1.2
COLOUR : Specify Clear or Black Anodized
Shipping Address:
Billing Address:

FAQ:

1. Why would I convert my 1.8T to use 2.0T coils?
   
   Allthough when we dissected the 2.0T Coil , internally it was the same as a 1.8T unit. I am waiting on getting a 2.8 24V Coil Pack so I can throw up a comparison shot but in the mean time running the 2.0T Coils allow you to run a hotter spark.
   We have a few local customers that we did the conversion for and they are extremely happy with the results.
   
2. What is the largest gap I can run with these coil packs?
   
   0.04" is what we used. If others have used larger please chime in and post up the data.
   
3. Why is the adapter plate needed??
   
   The OEM 2.0T Coils are approx 14mm taller than the 1.8T units. In order to have a seal that allows some form of security with the valve cover, the coil pack requires an adapter plate.
   
4. What are the PART #'s ?
   
   RED MKV FSI Coil Packs - 06E 905 115
   BLACK MKV FSI Coil Packs - 07K 905 715 F
   BLACK MKV TSI Coil Packs - 06F 905 115 F
   BLACK MKVI TSI Coil Packs - 06H 905 115

If you have any questions please do not hesitate to send over an email or post in here. Thanks so much everyone. If you feel like contributing to the FAQ , post it in here and I will compile it and add it to the FAQ.
Issam

[INA]

List updated to reflect below:
V1.1 LIST:

1. (4) 05GTIMarine - V1.1 PAID
2. (4) bigblue - V1.1 PAID
3. (4) jalcom1 - V1.1 - BLACK ANODIZED PAID
4. (4) TurboJOSH - V1.1 PAID
5. (4) EHOLT - V1.1 - BLACK ANODIZED PAID
6. (4) formerly silveratljetta - V1.1

V1.1 Counter == 24/8

V1.2 LIST: REGULAR

1. (4) 613B6 - V1.2 PAID
2. (4) Antoinebourdeau - V1.2 PAID
3. (4) gmx - V1.2 - PAID
4. (4) dknl - V1.2 - PAID
5. (4) Gulfstream - V1.2 - PAID
6. (4) EBG 18T - V1.2 - PAID
7. (4) vhstejskal - V1.2 - PAID
8. (4) cosbian - V1.2 - PAID
9. (4) dan5171 - V1.2 - PAID
10. (4) n7plus1 - V1.2 - PAID
11. (4) heywier427 - V1.2 - PAID
12. (4) Shayneduboulay - V1.2 - PAID
13. (4) WRC - V1.2 - PAID
14. (4) TooLFan46n2 - V1.2
15. (4) RabbitGTDguy - V1.2
16. (4) Audi Skate Snow - V1.2
17. (4) SEATONE - V1.2
18. (4) diagnosticator - V1.2
19. (4) Duchenbagen - V1.2

V1.2 LIST: BLACK ANODIZED

1. (4) MmmBoost - V1.2 - BLACK ANODIZED PAID
2. (4) A4Maine-iac - V1.2 - BLACK ANODIZED PAID
3. (4) checkdalevel - V1.2 - BLACK ANODIZED PAID
4. (4) Wet0willy01 - V1.2 - BLACK ANODIZED PAID
5. (4) kneel - V1.2 - BLACK ANODIZED PAID
6. (4) Robdon - V1.2 - BLACK ANODIZED PAID
7. (4) EErie B6 - V1.2 - BLACK ANODIZED PAID
8. (4) vinny.dtw - V1.2 PAID
9. (4) Jinxed - V1.2 - BLACK ANODIZED PAID
10. (4) mnkyA4 - V1.2 - BLACK ANODIZED PAID
11. (4) CyberPMG - V1.2 - BLACK ANODIZED PAID
12. (4) nofearhawk - V1.2 - BLACK ANODIZED PAID
13. (4) walky_talky20 - V1.2 - BLACK ANODIZED PAID
14. (4) walky_talky20 - V1.2 - BLACK ANODIZED PAID
15. (4) L.C.R. - V1.2 - BLACK ANODIZED PAID
16. (4) mrbacardi35 - V1.2 - BLACK ANODIZED PAID
17. (4) cerwin69 - V1.2 - BLACK ANODIZED PAID
18. (4) AmIdYfReAk - V1.2 - BLACK ANODIZED PAID
19. (4) Jflow23 - V1.2 - BLACK ANODIZED PAID
20. (4) audi_nightrider - V1.2
21. (4) 4RingsUSP - V1.2

V1.2 Counter == 160/84

V1.3's will be an additiional $5.
V1.3 : AWD / AEB / AYP / AGU / etc - Bolt down coils

1. (4) Cryser - V1.3 - BLACK ANODIZED PAID
2. (4) herb2k - V1.3 PAID
3. (4) Velocity196 - V1.3 - BLACK ANODIZED PAID
4. (4) Lasrsktr
5. (4) BensBlackGTI
6. (4) Caged_Bora_R1.8T
7. (4)
8. (4)
9. (4)
10. (4)
11. (4)
12. (4)
13. (4)

Counter == 24.

[One-Eight GTI]

Looks good Issam

[16plus4v]

YAAAAA upside down oil cap

[Gulfstream]

looks like they grip well... mby I wont need the hold downs.... what say ye?

[INA]

Going to be working with ECS tuning to offer you guys some amazing coil pack packages

[TooLFan46n2]

I'll be sending my payment in next week. When can we expect these pieces to be shipping out?

[INA]

I'll be sending my payment in next week. When can we expect these pieces to be shipping out?

Will be picking them up from anodizing on Friday and then they will ship out.

[velocity196]

Going to be working with ECS tuning to offer you guys some amazing coil pack packages

That cool, they have not the best but alright pricing on coils.

[Boomdaddymack]

That cool, they have not the best but alright pricing on coils.

i bet you found a good place to buy them

[velocity196]

i bet you found a good place to buy them

LOL sure did!

[jbrehm]

Going to be working with ECS tuning to offer you guys some amazing coil pack packages

Details ASAP, please

[liloldbie]

Will these work on an AMU audi TT valve cover?

[screwball]

AWP VC - what do I need to make these work with MK6 coils?

[black lavender]

Going to be working with ECS tuning to offer you guys some amazing coil pack packages

Why ECS? We'll be paying $50 shipping

[INA]

looks like they grip well... mby I wont need the hold downs.... what say ye?

They fit pretty snug as is. I did not have any of the hold down's locally so all of the cars we did here were V1.2's

[Gulfstream]

ok, swap me over to the non hold down list. V1.2 for me.

[INA]

ok, swap me over to the non hold down list. V1.2 for me.

got it

[velocity196]

Ask and you shall receive! Nice Issam very nice! I seriously didn't think you would make these so fast

[INA]

Updated the first post with more part #'s

RED MKV FSI Coil Packs - 06E 905 115
BLACK MKV FSI Coil Packs - 07K 905 715 F
BLACK MKV TSI Coil Packs - 06F 905 115 F
BLACK MKVI TSI Coil Packs - 06H 905 115

[MKIII_96]

could these work with the AGN valve cover?

[Blu--Pearl]

i want

[herb2k]

How well do these cover the square ignition coil holes on the AWD valve covers?

[Cryser]

How well do these cover the square ignition coil holes on the AWD valve covers?

if no one answers I'll let ya know when i get my set =)

Sent my payment in for a set of v1.2 black anodized last night =)

[INA]

if no one answers I'll let ya know when i get my set =)

Sent my payment in for a set of v1.2 black anodized last night =)

Do you have an AWD valve cover right now?

[INA]

How well do these cover the square ignition coil holes on the AWD valve covers?

Not fully. If you want an AWD specific one I can do it but I would need minimum 13 people (52 pieces). Its just a simply modification to the drawing.

[herb2k]

Not fully. If you want an AWD specific one I can do it but I would need minimum 13 people (52 pieces). Its just a simply modification to the drawing.

I'd be interested in AWD specific ones if there's enough interest.

[pete@integrated]

could these work with the AGN valve cover?

No, however, I have tried that combination, and the first row of ribs on the coil will just barely shove into the AGN cover... Kind of a push & twist... Once it's in there it's secure.

Hope Issam doesn't mind me answering on his thread but I saw it and had already tried it.

[INA]

No, however, I have tried that combination, and the first row of ribs on the coil will just barely shove into the AGN cover... Kind of a push & twist... Once it's in there it's secure.

Hope Issam doesn't mind me answering on his thread but I saw it and had already tried it.

Not at all Pete. Once it helps out customers then thats all I care about.

[Powdered Toast Man]

Once it's in there it's secure.

O'RLY???

[MKIII_96]

No, however, I have tried that combination, and the first row of ribs on the coil will just barely shove into the AGN cover... Kind of a push & twist... Once it's in there it's secure.

Hope Issam doesn't mind me answering on his thread but I saw it and had already tried it.

so what youre saying is i could buy the 2.0t coils and just shove them in my AGN cover and they wont come loose?

[SALES@RSWORX]

Looking Good !

[velocity196]

the first row of ribs will just barely shove into...push & twist... Once it's in there it's secure.

I love the delete key!!! BAHAHAHAHA!!!

I luv team work! Keep it up guys

[05GTIMarine]

You realize that these spacers don't really provide any more of a seal than you'll already have, right? The rubber sealing rings on the coilpack are able to fit within the existing coilpack bore and create a proper seal. The spacer would have to extend and butt up against the coilpack bore to form a longer bore to allow all rings to seal.. not to mention that you'd need some sort of rubberized coating or rubber film on the bottom of the spacer to seal against the raised outline that is around each coilpack bore.

You could have the spacer be a super tight fit on the coilpack but if your coilpack doesn't seal with its own rings, you need the spacer to be a press-fit w/ a rubberized bottom. I don't see that changing at all without some tight tolerances and exact outlines.

Thanks for the already overstated fact. We already know sealing material is needed to make a compete seal.

[erevlydeux]

Thanks for the already overstated fact. We already know sealing material is needed to make a compete seal.

Shut up you imbecile.