Airborne Caddy

[airbornejet]

Appreciate it Nash,
yeah, i'm still unsure of which wheels will end up on it, but thx for the input.

And, i saw another special lil bunny in the works i'm sure it will be Top Notch as usual.

car looks amazing in person and sounded spot on jet! think i got most of the drool spots off your bay...

all this and those other wheels and.......

take care,
nash

you're always welcome for a ride/drive, but i'm sure you're 20v will be even better. looking forward to seeing it finished. as for cluster, i'm going to run the Digifiz i picked up in Germany.

hey man, the truck looks great i saw it at wfc meet, then the day u came to drop off those wheels and dash and stuff.

i want to go for a ride in a vr mk1... to get an idea.. what im in for on my 20v.

so are u using mk1 clutster?

thx man, and enjoy that engine, it ran great for me. and, yeah i have to get a new battery for the truck, reason it didn't start. a new battery is on the way very soon.
I'm on no certain level bro, just me being me...

Good luck again on your new project

I have to agree. I saw it this past weekend when i picked up that motor from jet. It did not start but it was just amazing looking. Great detail. Now i know what my 80 caddy has to be compared to. I have a lot of work to even get it to jets level.

DU SCHAUST WIE EIN AUTO, NUR NICHT SO SCHNELL!!!!

[FLATBLACKMK2]

between you and Nash jeeeebuz Jet the mark1 vrclub is getting pretty rediculous....
Jay Fay

[johnbmxinvasion]

Nash is still taking it haha but I love the oem+ of the caddy.
Thanks airborne. Lmk when it's on the road. And I like your battery placement. I think I'm going to steal that.

[airbornejet]

LOL, i blame Mike and Nash for persuading me....

between you and Nash jeeeebuz Jet the mark1 vrclub is getting pretty rediculous....
Jay Fay

[airbornejet]

i will for sure, and you can steal away bro. i'm sure i'm not the first to do it.
Are you going to be done for SoWo?

Nash is still taking it haha but I love the oem+ of the caddy.
Thanks airborne. Lmk when it's on the road. And I like your battery placement. I think I'm going to steal that.

[johnbmxinvasion]

i will for sure, and you can steal away bro. i'm sure i'm not the first to do it.
Are you going to be done for SoWo?

no, if i get tires for my daily rabbit ill slam it and drive it; otherwise i actually plan on driving the caddy to H20.... if all goes well.

[airbornejet]

oh ok, eitherway you go, it'll be a plus.

no, if i get tires for my daily rabbit ill slam it and drive it; otherwise i actually plan on driving the caddy to H20.... if all goes well.

[TightDub]

Jus seeing the thread sir Been a fan of this one tho

[BORA RKT]

[deathhare.]

Cant wait to see all the VR mk1s at SoWo this year.
Besides Nash's unfinished pile mine was the only one last year.

We should have a mk1 VR gtg.

[airbornejet]

test fitted my Schnitzer type 2's.....

[OLD-GTI]

test fitted my Schnitzer type 2's.....

they look great, but it's just not a Jetton Original without RSs

[Nashty Rabbit]

they look great, and it's another Jetton Original

yo brian, fixed your quote....

jet, like i said before, love these wheels. can't recall the offset you told me and can't tell by the pic, but how does the front wheels sit?

take care,
nash

[airbornejet]

Nash, I can't remember the et off the top of my head, but I'll look when I get home Sunday. The front wheels look like they'll work for sure, with no issues.

yo brian, fixed your quote....

jet, like i said before, love these wheels. can't recall the offset you told me and can't tell by the pic, but how does the front wheels sit?

take care,
nash

[euro inc]

Truck turned out great. The car is a beauty and once the interior is finished it will be perfect!

[airbornejet]

Got the Digifiz hooked up, although i still have to figure out the Tach/Oil pressure.
Big thanks to my buddy Rodney (JRC Motorsports), for lending me a hand/knowledge.

[OLD-GTI]

What ECU are you running?

You need to pull the tach/coil signal from there, you can't pull it from the coil itself, otherwise it will cook it.

The oil pressure is likely because you are running the oem VR oil press sender, you need to get the correct one for the cluster, because they have different resistance.

All crap I fought with when doing mine...enjoy.

[.:Carlik:.]

nice fiz man!

[JDMillhouse]

jet you always have very nice cars, love the wheels

[tobiwonkonobi]

Looking good Jet. Nice to see another digifiz up and at 'em

[airbornejet]

Brian,
using the ECU out of my 97 mk3 GLX
yes, we found out that pullig it from the coil, didn't work.

ok on the Oil Pressure sender, i have everything for the cluster, so i'll have to relook that area, when i get some time to play with it again.

As always, thx for the info.

What ECU are you running?

You need to pull the tach/coil signal from there, you can't pull it from the coil itself, otherwise it will cook it.

The oil pressure is likely because you are running the oem VR oil press sender, you need to get the correct one for the cluster, because they have different resistance.

All crap I fought with when doing mine...enjoy.

Thx Carlik...

nice fiz man!

Thx man, i try...
Always wanted a caddy, but didn't imagine it would end up in this state.

jet you always have very nice cars, love the wheels

thx bro. See you soon

Looking good Jet. Nice to see another digifiz up and at 'em

[THE TRUE FASTGTI]

Got the Digifiz hooked up, although i still have to figure out the Tach/Oil pressure.
Big thanks to my buddy Rodney (JRC Motorsports), for lending me a hand/knowledge.

Love the dash. 131 is a little fast for America. Lol

Looks good.

How popular are the wood grain dash inserts?

DU SCHAUST WIE EIN AUTO, NUR NICHT SO SCHNELL!!!!

[TightDub]

test fitted my Schnitzer type 2's.....

[deathhare.]

What makes you think a 4cyl tach is going to work, without a conversion box, on a 6cyl engine?

[airbornejet]

131 lol yeah, i'll keep it slower for sure...

if you can find the wood? and in good shape. is that what you want?

Love the dash. 131 is a little fast for America. Lol

Looks good.

How popular are the wood grain dash inserts?

DU SCHAUST WIE EIN AUTO, NUR NICHT SO SCHNELL!!!!

Gave this a shot and it didn't work-----> so, on to Dakota Digital
http://forums.vwvortex.com/showthrea...+vr6+tach+work

What makes you think a 4cyl tach is going to work, without a conversion box, on a 6cyl engine?

[BORA RKT]

Nice as alwys Jet...Can't wait to see it!!!

[THE TRUE FASTGTI]

131 lol yeah, i'll keep it slower for sure...

if you can find the wood? and in good shape. is that what you want?

No just wondering how popular they are or how hard is it to find. I have them on my dash and someone saw a pic and was wanting to buy them. So i was just cerious.



DU SCHAUST WIE EIN AUTO, NUR NICHT SO SCHNELL!!!!

[deathhare.]

Gave this a shot and it didn't work-----> so, on to Dakota Digital
http://forums.vwvortex.com/showthrea...+vr6+tach+work

Dakota digital doesnt work either.
Many people have tried it.

[airbornejet]

oh ok, i'd keep them if i was you. but, will depend on the final look you're going after.

No just wondering how popular they are or how hard is it to find. I have them on my dash and someone saw a pic and was wanting to buy them. So i was just cerious.



DU SCHAUST WIE EIN AUTO, NUR NICHT SO SCHNELL!!!!

[GTrabbIt]

Love the ACS!! Digifiz looks cool, too. But is it possible to convert to MPH?

[kevinmacd]

Dakota digital doesnt work either.
Many people have tried it.

Have you tried it?

I have and it worked great. Used one in my original digifiz install back in 05 and 4 since then with no issues. Im curious why you think it wont work here?

[airbornejet]

Interior is almost complete, just a few minor details left.

[deathhare.]

Have you tried it?

I have and it worked great. Used one in my original digifiz install back in 05 and 4 since then with no issues. Im curious why you think it wont work here?

You used it on a vr6 swap?
There have been plenty of people try it with vr6 swaps + VW 4cyl tachs and it did not work.
Ive seen at least 3 people try it on here and it didnt work and one even talked with Dakota Digital and they told him it would not work and refunded his money.

[Junkie1.8TQ]

Saw some interior shots today from EW... Looking good! Can I steal your color for my project?

[taymk2]

You used it on a vr6 swap?
There have been plenty of people try it with vr6 swaps + VW 4cyl tachs and it did not work.
Ive seen at least 3 people try it on here and it didnt work and one even talked with Dakota Digital and they told him it would not work and refunded his money.

Well I know keV has used it on his old vr itb swap and on his fsi swap ....and dayum this is gotta by one of the hottest mk1"s out there