sick ass car man keep it up, what turbo are you running and software, VEMS?
+ Reply to Thread
Results 1 to 15 of 15
Thread: AUDI S2 - Black Beast
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
AUDI S2 - Black Beast
06-07-2011 07:44 AM
#1
Hello, i am from Slovenia and i would like to introduce you this Audi S2 2.2T Quattro. The car is completely modified and has less weight, more power, better suspension and better brakes of course. The car is currently running pure 760HP on safe mode with turbo set about 2.0 bars approx 29psi. The car's motor is still brand new assembled so it will run like that for few miles so everything gets in its place
then we will open turbo up to 2.8 bars approx 40psi.
We measured it on racelogic gps so measurements are accurate. from 100-200kmh goes 6.46sec, top speed by now was 295.90km/h. Ill post up some more informations when we'll measure it again with race mode setup.
Here are some pictures:
Here are also some videos of the car:
ill keep this theme up to date soon as something new will be going on."Fast is fine, but accuracy is everything" By Me
-
-
Junior Member
- Join Date
- Aug 12th, 2010
- Posts
- 95
06-08-2011 03:29 PM
#2
__________________________________________________ __________________________________________________ ____________
95.5 AUDI S6
04 Mercedes E320
99 BMW M3
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
06-08-2011 05:16 PM
#3
it's an Innovative F266 Ball Bearing Turbo, it's an AUTRONIC SM4 for engine and 2 amplifiers DIRECT FIRE CDI 500R for each cilinder
"Fast is fine, but accuracy is everything" By Me
-
Geriatric Member
- Join Date
- Jun 23rd, 1999
- Location
- New England
- Posts
- 51,645
- Vehicles
- '97 BMW 328i | '10 Mazda5
06-12-2011 09:40 PM
#4
wow... ****ing hell.
well done.
-
Member
- Join Date
- Feb 13th, 2001
- Location
- 407
- Posts
- 1,872
- Vehicles
- 11 gti apr st2-
06-13-2011 02:48 AM
#5
awesome build, just insane.
what rpms does the turbo start boosting?vortex folding thread.................. ............. ............... ...... ............ ........... .... ... ......... ..... ........ .... ..... ... intention
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
06-14-2011 07:13 AM
#6
he he
Originally Posted by Chapel
) thanks!!
"Fast is fine, but accuracy is everything" By Me
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
06-14-2011 07:14 AM
#7
thnx alot, it's realy insane yes...the turbo starts to boost at 2500rpm, at around 3000 it's allready at full boost, so the rev limiter is set to 3200rpm, but you can launch this car wihout problems at redline Originally Posted by O_loung1
)
"Fast is fine, but accuracy is everything" By Me
-
Junior Member
- Join Date
- Aug 12th, 2010
- Posts
- 95
06-18-2011 08:27 PM
#8
what about the manifold ? what flange it is custom made ?
__________________________________________________ __________________________________________________ ____________
95.5 AUDI S6
04 Mercedes E320
99 BMW M3
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
06-19-2011 07:53 AM
#9
it is custom made manifold, made by one friend... Originally Posted by 5cylindermario
the entire manifold
"Fast is fine, but accuracy is everything" By Me
-
Junior Member
- Join Date
- Aug 12th, 2010
- Posts
- 95
06-20-2011 07:21 PM
#10
manifold its holding ? does he make em to sell em also if yes how much with a T3 flange, i have a 95 urS6 Originally Posted by solidx
it is custom made manifold, made by one friend... the entire manifold__________________________________________________ __________________________________________________ ____________
95.5 AUDI S6
04 Mercedes E320
99 BMW M3
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
06-21-2011 06:01 PM
#11
it was made specificly for this car, and does not produce massive Originally Posted by 5cylindermario
"Fast is fine, but accuracy is everything" By Me
-
Junior Member
- Join Date
- Jun 7th, 2011
- Location
- Slovenia - Maribor
- Posts
- 0
- Vehicles
- Audi A3 Sportback 2006, Audi S2 2.2T 5Cly, Opel Vectra C 2.2DTI Irmscher, Mitsubishi Lancer EVO 9 MR
-
Member
- Join Date
- Nov 12th, 2008
- Location
- StickenBurg,AZ
- Posts
- 5,462
- Vehicles
- 84 scirocco,83 Scirocco(parts),76 scirocco"Sabine",85 ledgends turbo scirocco
01-08-2012 10:41 AM
#13
Wow man,now thats a turbo.
Obviously,I need to get over this whole scirocco thing and get an AUDI.
-
n00b
- Join Date
- Feb 26th, 2010
- Location
- Western Massachusetts
- Posts
- 5
- Vehicles
- 95 URS6
-
Member
- Join Date
- Jan 31st, 2010
- Location
- New York
- Posts
- 230
- Vehicles
- 03 B6 A4 1.8TQM
03-10-2012 02:04 AM
#15
wow this thing is a beast alright nice work.
Fly'n down Long Island Full 180 Whippin'
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
