Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 1 of 7 12345 ... LastLast
    Results 1 to 25 of 171

    Thread: Lower it! (Not a TT, but a lot lower and equally as cool)

    1. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-12-2011 08:59 PM #1
      So I have been wanting to do this for a while and I figured I would make a build thread. Also I'm sure this type of "build" will be more interesting because its a lot of fabrication which everybody loves!
      Lets get started....
      My goal is to build and uber dope slammed Radio Flyer wagon. Before anyone asks
      -No I do not have children
      -I do not plan on having children for quite some time
      Now that that's out of the way lets get to it. My inspiration came from a local buddy of mine.

      I also found gobs of info on the HAMB for the front end steering and axle configuration.
      http://www.jalopyjournal.com/forum/s...d.php?t=106561
      I came across this "slightly" used example at an antique shop for a whopping $12

      I started by taking it all apart.


      Thankfully the whole thing was held together with screws and nuts! This may be the easiest project ever!
      Selective focus shots are

      All apart

      Remember to put all your parts in bags so you dont misplace them...

      Now its time to give it a good bath

      All clean.


      It may have lost its blood and may be dead, but it will come back with more soul and spirit then ever before
      Next on the list of things to do is get some metal stock and fab up the front and rear axles.
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    2. 06-12-2011 09:26 PM #2
      Those wheels look stupid with that body kit, you need 20's for it to look right.

    3. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-12-2011 10:00 PM #3
      I dont cheat lol. I scrape frame
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    4. Member Mantvis's Avatar
      Join Date
      Jan 1st, 2010
      Location
      Chicago, IL
      Posts
      1,664
      Vehicles
      2010 Bagged VW CC APR k04,2001 Audi TT APR STG3+, 2003 Audi TT 180hp
      06-12-2011 10:50 PM #4
      U need a TT frame
      2001 225Q (Function Car): APR Stage 3+, APR 3' Exhaust System, Brembo Brakes, Koni Suspension
      2003 180 (Form Car): Rokkor Coilovers,Custom Front Single Frame Bumper with A8 Grill Votex Sideskirts, Votex Rearlip, Axis Penta 19' Wheels, 2 Rockford Fosgate 15' Subwoofers

    5. Member
      Join Date
      May 23rd, 2008
      Location
      Lewisville, TX
      Posts
      2,807
      Vehicles
      2001 LZ7W 225 coupe; 1995 MX-5 M-edition
      06-12-2011 11:15 PM #5
      Fail! Needs carbon to pull it off.
      You don't own a TT, you support it: SOLD 7.18.15. 2001 LZ7W coupe; REVO chip; Forge hoses and DV relo; MadMax DV; OSIR corners, DEFCON2, 986 seats, 18in OZ Vela II; trunk mat; all weather floor mats; 4-piece Votex kit. My Mods and Primer Porn here: http://public.fotki.com/TTQ2K2/.

    6. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 04:47 AM #6
      Haha. I keep it old school.
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    7. Member CharlieTT's Avatar
      Join Date
      Mar 31st, 2010
      Location
      Milton Keynes - England
      Posts
      169
      Vehicles
      2002 TTR
      06-13-2011 07:10 AM #7
      I don't really know why, but that is cool as f*ck :-)

      Charlie

    8. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 09:44 AM #8
      Quote Originally Posted by CharlieTT View Post
      I don't really know why, but that is cool as f*ck :-)

      Charlie
      Yeah there really is no point to it, but for some reason I just found myself wanting one haha
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    9. Member CharlieTT's Avatar
      Join Date
      Mar 31st, 2010
      Location
      Milton Keynes - England
      Posts
      169
      Vehicles
      2002 TTR
      06-13-2011 11:25 AM #9
      Quote Originally Posted by PLAYED TT View Post
      Yeah there really is no point to it, but for some reason I just found myself wanting one haha
      I want one too, but being in the UK I think it is unlikely - also cheaper than modding a TT :-)

      Charlie

    10. 06-13-2011 12:16 PM #10
      You need to notch that frame San! Mini air bags and lots of stickers or FAIL!

    11. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 12:49 PM #11
      Charlie you have a good point. You could always buy a new one on eBay.
      Warranty it will have a custom tubular frame so it won't need a notch. Also I couldn't find mint bags, but I did find small hydraulics that would have the same effect
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    12. 06-13-2011 03:55 PM #12
      I bet you could fit some gold 12" daytons on it.

    13. Member
      Join Date
      Jan 25th, 2005
      Location
      Ottawa, Canada
      Posts
      9,571
      06-13-2011 03:58 PM #13
      check out ATV wheels and put some rubber bands on them .

      So cool
      | BENPURKISSDESIGN |

      STANCE - Related words:
      hellaflush-hellafail-stanced-stancing-mental retardation-beaners etc.

    14. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 04:08 PM #14
      Quote Originally Posted by Neb View Post
      check out ATV wheels and put some rubber bands on them .

      So cool
      I think I'm going to stick with the originals and do some mad camber
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    15. Member
      Join Date
      Dec 31st, 2006
      Location
      Allentown/Reading, PA
      Posts
      2,527
      06-13-2011 04:35 PM #15
      I also think you need some stickers for it.

    16. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 07:50 PM #16
      Quote Originally Posted by sfajk1 View Post
      I also think you need some stickers for it.
      Oh believe me Chris it will have "some"
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    17. Member Mantvis's Avatar
      Join Date
      Jan 1st, 2010
      Location
      Chicago, IL
      Posts
      1,664
      Vehicles
      2010 Bagged VW CC APR k04,2001 Audi TT APR STG3+, 2003 Audi TT 180hp
      06-13-2011 08:08 PM #17
      ughhhh just make it happen already!

      guess what i did today xDDDD
      2001 225Q (Function Car): APR Stage 3+, APR 3' Exhaust System, Brembo Brakes, Koni Suspension
      2003 180 (Form Car): Rokkor Coilovers,Custom Front Single Frame Bumper with A8 Grill Votex Sideskirts, Votex Rearlip, Axis Penta 19' Wheels, 2 Rockford Fosgate 15' Subwoofers

    18. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 09:13 PM #18
      Quote Originally Posted by Mantvis View Post
      ughhhh just make it happen already!

      guess what i did today xDDDD
      I need to wait for my super secret special steering parts to arrive.
      What did you do today?
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    19. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-13-2011 09:27 PM #19
      Small update.....
      Parts bought
      3 1/4 FEMALE RH STUD P SER NYLOY RACE ROD ENDS $17
      1 1/4-28X7/8X3/8 FINE THD CPLNG NUT ZN ------------$5
      1 1/4"-28SAE OIL FIN. 2' THREADED ROD---------------$1
      4 1/4" FENDER WASHERS---------------------------------$1
      4 1/4" NYLON LOCK NUTS---------------------------------$1
      4 1/4"X1" CARRIAGE BOLTS-------------------------------$1
      1 3/4"X3FT FLAT BAR--------------------------------------$7
      1 3/8"X3FT ROUND BAR-----------------------------------$5
      1 3/4"X3FT SQUARE TUBE---------------------------------$8
      4 3/4" AXLE CAP NUT--------------------------------------$2
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    20. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-14-2011 06:56 PM #20
      I spent an hour or two today getting the rear sorted out,
      Parts

      I measured leaving some excess on each side, then marked the holes and drilled them out to allow the carriage bolts to stick up through the wagon floor.


      Then some fender washers and lock nuts to keep it all together.

      Then I cut the tubing to hold the axle.

      Both sides cut and fitted.

      Then I drilled holes to fit the axles into. Notice how they don't sit level

      Damn right that's a fine ass. The space beneath the rear cross member is a 1/4". I recon that should clear most cinders

      That's all for tonight. I hope to get the front end finished tomorrow since I have off.
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    21. Member .:Hinrichs:.'s Avatar
      Join Date
      Apr 26th, 2010
      Location
      Wyomissing, PA
      Posts
      6,062
      Vehicles
      2012 Rubicon, 1994 M///
      06-14-2011 08:31 PM #21
      Not fair James....
      "On your mark, get set, terrible"
      Premium Euros - I do custom work (air installs, coils, notches, etc)

    22. 06-14-2011 10:15 PM #22
      Its gonna need curb feelers

    23. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-14-2011 10:31 PM #23
      Quote Originally Posted by .:Hinrichs:. View Post
      Not fair James....
      Jim we can do the same for yours. Seriously the hardest part is drilling through the 1/4" steel. Oh and the front end geometry . But seriously let's do it. Oh and I bought dales old roof rack because it won't fit in the trunk
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    24. Moderator PLAYED TT's Avatar
      Join Date
      Oct 17th, 2010
      Location
      Wichita, KS
      Posts
      13,989
      Vehicles
      A German thing, and a not so German thing
      06-14-2011 10:32 PM #24
      Quote Originally Posted by warranty225cpe View Post
      Its gonna need curb feelers
      I'm not too worried about these wheels. They are already crubed up from the PO
      Slammed Radio Flyer---flickr---My Build Thread--- Podi
      Quote Originally Posted by Marcus_Aurelius View Post
      if this really happens, I'm 'stancing' my car and going for some 'hellaflush'.

    25. Member .:Hinrichs:.'s Avatar
      Join Date
      Apr 26th, 2010
      Location
      Wyomissing, PA
      Posts
      6,062
      Vehicles
      2012 Rubicon, 1994 M///
      06-14-2011 10:58 PM #25
      Drill press worked wonders for me

      I'm just jealous of the rear, I'm gonna buy another one soon prolly tho, my front end doesn't bother me
      "On your mark, get set, terrible"
      Premium Euros - I do custom work (air installs, coils, notches, etc)

    Page 1 of 7 12345 ... LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •