Sovietaced

[Sovietaced]

drilled a hole through my gas tank when doing the hardwood floor in the back
also need to order an empi axle since mine is about to go.
in addition to my coolant leak

[AbuNigel]

drilled a hole through my gas tank when doing the hardwood floor in the back
also need to order an empi axle since mine is about to go.
in addition to my coolant leak

that suuuuuuuuuuuucks dude
I'd maybe try to find a used OEM axle though. I hear empi's go like twigs

[Sovietaced]

that suuuuuuuuuuuucks dude
I'd maybe try to find a used OEM axle though. I hear empi's go like twigs

Wasn't sure you'd be internetting in japan. I looked for some used OEM ones but decided on an empi. I've heard mixed reviews but I'm not dumped so I figure I can roll around on it for a couple months. Gas tank problem should be solved tomorrow hopefully. Hardwood floor is almost done. Gonna do the thermostat sometimes this week. Picking up the wheels tomorrow

[LaceMan]

20th clone 4door? Looks amazinq bro keep up tha good work

[AbuNigel]

Wasn't sure you'd be internetting in japan. I looked for some used OEM ones but decided on an empi. I've heard mixed reviews but I'm not dumped so I figure I can roll around on it for a couple months. Gas tank problem should be solved tomorrow hopefully. Hardwood floor is almost done. Gonna do the thermostat sometimes this week. Picking up the wheels tomorrow

yea mang, a little bit.
the skylines, evos, and mugens keep cars on the brain haha.

what are you doing about the gas tank? can you just patch it?

And maybe i can squeeze in my thermostat when I get home before I gotta go back to school. Not much good just sitting in that box...

Did you get adapters yet? I was gonna send you the link to the $200 ones but I saw you beat me to it lol. Can't wait to see the wheels on the car dude

[xjoex]

for a good turn a round
for CT

[Sovietaced]

yea mang, a little bit.
the skylines, evos, and mugens keep cars on the brain haha.

what are you doing about the gas tank? can you just patch it?

And maybe i can squeeze in my thermostat when I get home before I gotta go back to school. Not much good just sitting in that box...

Did you get adapters yet? I was gonna send you the link to the $200 ones but I saw you beat me to it lol. Can't wait to see the wheels on the car dude

Tried to patch the gas tank, I believe it's leaking from the underside.. ugh. So it actually dripping outside and I will probably have to take the tank out.Taking the tank out might be just as hard as the timing belt since I have to remove the whole rear axle fml.

[AbuNigel]

Tried to patch the gas tank, I believe it's leaking from the underside.. ugh. So it actually dripping outside and I will probably have to take the tank out.Taking the tank out might be just as hard as the timing belt since I have to remove the whole rear axle fml.

**** dude
if you need you can definitely go grab my jack and jack stands and tools if you want to go to my house in BPT.
Wish i could help, sounds like a real bitch...

[Sovietaced]

**** dude
if you need you can definitely go grab my jack and jack stands and tools if you want to go to my house in BPT.
Wish i could help, sounds like a real bitch...

I may have to, probably gonna set the car up on jackstands for a good couple days and just have at it.

[Sovietaced]

Just picked up my new set of wheels

[e.shell]

Just picked up my new set of wheels

what are they!?

[Sovietaced]

what are they!?

You already know it is a secret

[Sovietaced]

started work on my gas tank leak, siphoning out the gasoline was a pain until I searched vortex. Then i started on removing my brake calipers and then i found out that I didn't have an 8mm hex so I'm stuck until tomorrow. Hopefully adapters will be on by the 20th

[Sovietaced]

just patched the gas tank hole! Planing on paint my car by the 26th, satin white

TIME TO GO HARD

[Sovietaced]

Started sanding down the car

[i3rent]

Started sanding down the car

It's a bitch isn't it? You using 220?

[Sovietaced]

It's a bitch isn't it? You using 220?

I'm going 60, to 220, to 600, 1000, 2000 I want this **** to be like glass

[ZEROtank]

aristos ftw

[Sovietaced]

aristos ftw

aristos no more, wheels going on once I get adapters

[AbuNigel]

I'm going 60, to 220, to 600, 1000, 2000 I want this **** to be like glass

but aren't you suppose to leave some tooth for when you are painting?

I mean, to my knowlege 1000-2000 grit is just for the finish, not for prep, could be wrong though.

I would do 60, 220, 400, 600, 800 then paint. Then 800 wetsand between each layer and go into the 1000 and 2000 for the last layer for a good finish.

But i'm a body work virgin, just feel like i remember reading this somewhere, so take what i say with a grain of salt

[Sovietaced]

but aren't you suppose to leave some tooth for when you are painting?

I mean, to my knowlege 1000-2000 grit is just for the finish, not for prep, could be wrong though.

I would do 60, 220, 400, 600, 800 then paint. Then 800 wetsand between each layer and go into the 1000 and 2000 for the last layer for a good finish.

But i'm a body work virgin, just feel like i remember reading this somewhere, so take what i say with a grain of salt

I'm not sure tbh, but I did 1000 grit on my skirts and they came out fap. You're probably right though. I'll probably stick to 800 for the primer. Using the the single stage rusto satin white so I'll go 1000-2000 in between every 3-4 coats.

[. W e r d n a]

wtf is up with your sig?

[Sovietaced]

wtf is up with your sig?

[Sovietaced]

change of plans, going 60,220, laying down primer, hitting the primer with 400, then laying down the paint with 800,1000 in between a number of coats.

[Sovietaced]

Now I have this, waiting for adapters :

[JDM-JTI]

ill tune in since you're a local

do you go to those tuesday night norwalk meets?

[Sovietaced]

ill tune in since you're a local

do you go to those tuesday night norwalk meets?

yeah i went to the last one that got broken up by cops rofl, it was funny

[JDM-JTI]

i saw a friend post something on facebook about cops and tow trucks .. when my cars done ill try n make it out if its still going on

[AbuNigel]

Tire+wheels looking baller. Can't wait for you to get adapters lol

Oh and Tuesday night gtgs?

[Sovietaced]

i saw a friend post something on facebook about cops and tow trucks .. when my cars done ill try n make it out if its still going on

the meets are okay, organizers are a bunch of ricers tbh. steeze, mikey pants, with honor, and some other nice stanced cars showed so it was alright.

[Sovietaced]

Tire+wheels looking baller. Can't wait for you to get adapters lol

Oh and Tuesday night gtgs?

yeah me too, that guy won't get back to me about them. and yes facebook norwalk car meet

[stay blazed]

Planing on paint my car by the 26th, satin white

nice man

similar to rudi's color?

oh, and Werdna does in fact like penis

[Sovietaced]

nice man

similar to rudi's color?

oh, and Werdna does in fact like penis

chyea, satin white rustoleum ghetto rattle can in my garage job ftw, but on the real it should come out okay.

[Twilliams83]

your paint doesnt look to bad, why are you gunna rattle can it? or was there some sarcasm there?

[Sovietaced]

your paint doesnt look to bad, why are you gunna rattle can it? or was there some sarcasm there?

I was partly talking **** about myself. I'm rattling canning it because I am too broke for a paint gun and I'm doing the poor man's paint job method (google it).