Jack Pad....is this right?

[MoreGooderTT]

Mine is 4" but a 3" jackpad would work just fine. One thing to note is that you'll definitely need a low profile jack to lift the RS. It's much lower than I anticipated. I have access to a shop with 7 lifts, and the lift that I normally use was too tall. Luckily, they have two that are low profile.

Anyway, I bought a jack like these on Ebay for like $90 or something. They're inexpensive but they're actually pretty nice. I don't think you need to spend $300 on a jack:

http://www.ebay.com/sch/i.html?_from...All-Categories

- Jeremy -

Can you find the specific one you have, and also, if you have time, measure what diameter jack pad it's designed to use please? I'd rather get my jack now than wait until I need it.

[mageus]

My votes:

- I have no problem with a 3" base
- I don't need etching

I got an aluminum low profile jack from Costco. <$100, and lifetime (Costco) warranty if the seal blows. The pad size doesn't matter (although I think it's 4") since there is no metal flange at the rim of the pad; the rubber pad is higher than any of the surrounding metal.

[quattive]

Frankly, I'm leaning towards no etching ...

Me too.

[TTrevoRS]

I'm near Toronto.

[neonova6]

I'm near Toronto.

Nice to see another Trevor here. And also with a Suzuka RS; what are the odds???

I'm fine without the etching, and ok with a 3" base.

[- Jeremy -]

Can you find the specific one you have, and also, if you have time, measure what diameter jack pad it's designed to use please? I'd rather get my jack now than wait until I need it.

This is the actual one I bought. Liftmaster TT6913. As you can see, I bought it on German Ebay so I don't know if you can get it in the States. Either way, they all look identical and I'm pretty sure they're just all made in China by the same company and then sold by different importers at different prices. I'm pretty sure the $300 jacks are the same as the $100 jacks.

Either way, this one is TÜV approved which is a very rigorous German safety certification process.

http://www.ebay.com/itm/ws/eBayISAPI...E:L:OU:US:1123

- Jeremy -

[MoreGooderTT]

This is the actual one I bought. Liftmaster TT6913. As you can see, I bought it on German Ebay so I don't know if you can get it in the States. Either way, they all look identical and I'm pretty sure they're just all made in China by the same company and then sold by different importers at different prices. I'm pretty sure the $300 jacks are the same as the $100 jacks.

Either way, this one is TÜV approved which is a very rigorous German safety certification process.

http://www.ebay.com/itm/ws/eBayISAPI...E:L:OU:US:1123

- Jeremy -

Nice! Thank you Jeremy.
I'll be shopping for one this weekend, both in stores and online.

[Stevelev]

No response yet with respect to reducing the diameter but I'll follow up tomorrow. I wanted to get this going since I'll be out of town for good chunk of this week and assume all wish to proceed whether it be the original and proven 4" size or a slightly smaller diameter. Sorry guys but no etching this time around.

Price per jack pad: $35.

Shipping: $25. for 1 pad and $30. for 2 pads (tracking and insurance included)

Paypal Payment to stevelev77@gmail.com

For those requiring shipments outside of North America, email me with your complete address and number of pads desired prior to payment so I can work out specific shipping costs.

Payment deadline: Sunday, January 29th. This allows adequate time for payment and more importantly having the pads produced, shipped and received prior to March 1st.

A minimum pre-paid order of 25 jack pads will be required and sorry, no refunds once I place the order.

Examples for mathematically challenged:

1 pad - $60. incl shipping
2 pads- $100. incl. shipping

[blimey]

No response yet with respect to reducing the diameter but I'll follow up tomorrow. I wanted to get this going since I'll be out of town for good chunk of this week and assume all wish to proceed whether it be the original and proven 4" size or a slightly smaller diameter. Sorry guys but no etching this time around.

Price per jack pad: $35.

Shipping: $25. for 1 pad and $30. for 2 pads (tracking and insurance included)

Paypal Payment to stevelev77@gmail.com

For those requiring shipments outside of North America, email me with your complete address prior to payment so I can work out specific shipping costs.

Payment deadline: Sunday, January 29th. This allows adequate time for payment and more importantly having the pads produced, shipped and received prior to March 1st.

A minimum pre-paid order of 25 jack pads will be required and sorry, no refunds once I place the order.

Examples for mathematically challenged:

1 pad - $60. incl shipping
2 pads- $100. incl. shipping

payment for one sent! Thanks,Hal

[GERMANCARMAN]

No response yet with respect to reducing the diameter but I'll follow up tomorrow. I wanted to get this going since I'll be out of town for good chunk of this week and assume all wish to proceed whether it be the original and proven 4" size or a slightly smaller diameter. Sorry guys but no etching this time around.

Price per jack pad: $35.

Shipping: $25. for 1 pad and $30. for 2 pads (tracking and insurance included)

Paypal Payment to stevelev77@gmail.com

For those requiring shipments outside of North America, email me with your complete address and number of pads desired prior to payment so I can work out specific shipping costs.

Payment deadline: Sunday, January 29th. This allows adequate time for payment and more importantly having the pads produced, shipped and received prior to March 1st.

A minimum pre-paid order of 25 jack pads will be required and sorry, no refunds once I place the order.

Examples for mathematically challenged:

1 pad - $60. incl shipping
2 pads- $100. incl. shipping

I just sent payment for 2, prefer smaller diameter if possible, if not I will work with the 4"

Thank you again for doing this for all of us, greatly appreciated!!!!!!!!!!

[mageus]

Payment sent.

[MoreGooderTT]

Payment sent for qty 2.
THANK YOU! You're a real hero to us.

[as350]

Steve, as per our email exchange, I sent you money for 2. Andy T

[Stevelev]

Here's who we have so far. Sorry if the names don't match your screen names ...

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
John (four)

Please email me (stevelev77 at gmail), if there are any errors.

[- Jeremy -]

Here's who we have so far. Sorry if the names don't match your screen names ...

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
John (four)

Please email me (stevelev77 at gmail), if there are any errors.

I think you mean Jeremy (four)

- Jeremy -

[mtbscoTT]

I decided to go with just one. Payment sent. Thanks Steve for doing this.

[Stevelev]

I think you mean Jeremy (four)

My apologies ! You'd think I'd be able to avoid screwing up the one with the largest number (not to mention the most generous, thank you !)

We're at 19 so 6 to go ...

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
Jeremy (four)
A.Ridge
mtbscoTT

BTW, if anyone needs me to hold off shipping until some date in the future, no problem provided payment is made by this Sunday's deadline - PLEASE put the specific date in the comments when sending Paypal Thx !

[TopCarbon]

Order placed for two. Thanks Steve!

[Stevelev]

We're almost there (2 to go)

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
Jeremy (four)
A.Ridge
mtbscoTT
TopCarbon (two)
Jetronic (two)

[JRockFTW]

I'll take one...

[neonova6]

I'm still down for two

[JRockFTW]

Boom...money sent

[Stevelev]

Boom...money sent

Please note that payment must be rec'd by the deadline to be included in this order. It appears that yours may not be deposited into my Paypal account until as late as Jan 31st.

I'm still down for two

Great but payment not yet rec'd

[neonova6]

Payment sent!
Thanks again!

[kozani]

Payment sent for one.

Thank you very much!

[Stevelev]

We've hit the minimum so its a go ! Just a reminder that the deadline to get in on this is this Sunday (Jan 29). For those who havent yet paid, please do so no later than that date as I plan to place the order the following morning.

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
Jeremy (four)
A.Ridge
mtbscoTT
TopCarbon (two)
Jetronic (two)
Trevor (2)
Thomas

[TTrevoRS]

Thanks for all the work you have done on this.

[Stevelev]

Tomorrow is another day but here's my final update for the day:

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
Jeremy (four)
A.Ridge
mtbscoTT
TopCarbon (two)
Jetronic (two)
Trevor (2)
Thomas
Maxius (2)

[MoreGooderTT]

You forgot me. I paid for two. Thanks!

[MoreGooderTT]

You forgot me. I paid for two. Thanks!

Oh wait.... You're using real names. Nevermind!

[blimey]

We've hit the minimum so its a go !

Sweet! Thanks a million for stepping up and getting this done. I have a feeling there will be people who see this and will be sorry they missed out

[kozani]

I changed my mind now. I want two instead of just one. I will send you the difference immediately. Thanks!

[deadlywingz]

i still want two just give me till friday bc i dont get paid until friday

[TunaTT]

No response yet with respect to reducing the diameter but I'll follow up tomorrow. I wanted to get this going since I'll be out of town for good chunk of this week and assume all wish to proceed whether it be the original and proven 4" size or a slightly smaller diameter. Sorry guys but no etching this time around.

Price per jack pad: $35.

Shipping: $25. for 1 pad and $30. for 2 pads (tracking and insurance included)

Paypal Payment to stevelev77@gmail.com

For those requiring shipments outside of North America, email me with your complete address and number of pads desired prior to payment so I can work out specific shipping costs.

Payment deadline: Sunday, January 29th. This allows adequate time for payment and more importantly having the pads produced, shipped and received prior to March 1st.

A minimum pre-paid order of 25 jack pads will be required and sorry, no refunds once I place the order.

Examples for mathematically challenged:

1 pad - $60. incl shipping
2 pads- $100. incl. shipping

Payment sent for one. Thank you.

[Stevelev]

I'm using the names I have from Paypal which, in some cases, may not match your screen names. Also only those whose payments have cleared are confirmed:

Blimey
GaBoYnFla
GermanCarman (two)
Mageus
Brad (two)
as350 (two)
mechee (two)
johnlz7w (two)
Jeremy (four)
A.Ridge
mtbscoTT
TopCarbon (two)
Jetronic (two)
Trevor (two)
Thomas (two)
Maxius (two)
Shoemakerm