My body misses your bodies
I was wondering if that would make a significant difference.. I did my lips the same way by hand but they're a good amount more reflective. I don't remember if I even went up to 2000
also, remeasured my ground to fender and it's a little lower than I thought..
Last edited by aledelic42; 04-28-2012 at 05:05 PM.
This may be a silly question but did you strip the clear coat of them? I tried polishing the lips on my mercedes wheels but they didn't come out like a mirror until I stripped the clear off them.
If you did strip the clear, I'd suggest going back to 1k grit and work your way back to 2k, then with a drill and powerball shine them up. I could get mine to shine like a mirror by hand but thats after I sanded the crap out of them.
Also use water when sanding….looks like you've been doing it inside. If you're not using water you won't get good results.
I think the final finish looks like the clear coat is still on but it's definitely off. lips are really rough before sanding. they were actually completely stripped professionally by the guys that powdercoated the centers. I think he started over at least three times before accepting it.. the last time he started as low as 150 and wet sanded from 600 to 2000 (on a blanket his ex made him ). they feel super smooth like they're asking for polish.. I think the next move will be the powerball with a different type of polish. he wants to have them on monday so we'll have pictures soon
this guy's been helping us too but now he's back home
This is the stuff I use and used when polishing the sewer caps:
If its smooth and you don't see any sanding lines its ready for polish. Just make sure you're polishing until you see black, then buff off.
I'll tell him to check that out if he doesn't see here himself. it's weird because while applying the polish it gets really black like it's working but doesn't reflect as much as I'd expect. by the way if anyone's wondering kevin lives two floors under us so he's basically another roommate. until the end of this week when he's gone for good and I'm gone for summer
Go grab this:
And use the powerball on it. When I did the lips on my AMG's, they came out a perfect mirror finish.
last pictures with that ****ing donut
mk4 day today
his coils are as low as they'll go. he's planning on getting lower so it's ok
wanted to test fit one of nick's wheels but the stock lugs are too short
and this is what it looks like inside my box
phone pictures ftl
nick's almost back