So i finally decided to make a build thread/time line of my car.
2004 Audi A4
The day I bought it.
APR R1 Diverter Valve
Homemade intake (not a cone on the MAF)
APR Stage 1+ tune
034 Motorsports test pipe
BFI Polly motor mounts
Suspension/Wheels and Tires
18x8.5 ET 45 Rotiform BLQ`s
20MM FK Spacers in the rear
17MM FK Spacers in the front
New South Boost gauge
Cupra R lip
7000k HID`s in the headlights
3000K HID`s in the fogs
Painted grille molding
Homemade skid plate (made from a road sign)
Royal Woodie steering wheel
When I fist put on the coils
I think at this point my fender to ground was 22 and 1/4. This is when I knew i needed to make a skid plate
So after rubbing threw one skid plate in less than two weeks i decided to raise her up a little and this is how she sat until I got my wheels.
Wheels were a tough one for me. I couldn't decide on anything. First it was sawblades, then CCW`s. But after dub and rub i had my mind set on Rotiform BLQ`s. I was never so happy to see the UPS man.
And a few from the first day on the car, Without spacers.
Then after looking at other B6`s i knew i needed somthing more on the front end. So I started to look into the Cupra R lip for the R32. I read that with a little trimming they would work so I gave it a try. And this is what i got.
This is how the car sits as we speak.
Stay tuned for updates. Im always messing with the car so check back weekly for updates.