Also, it's a Rustoleum Gloss Royal Blue ROLL ON job
I've shot many a car in the past, but was really intrigued by this process. About 50/50 mix with mineral spirits and a few roll on sessions!
Hard to see with high iso night grain:
![]()
#1
Since everyone here seems to be doing a show and tell these days, yay:
Everything else is good, got a ton of miles and there has only been 1 autox since. Got some star specs on the stock rims, should be good to go for stock class, yay.
I'm sure everyone here hates miatas, especially miatas that came with hard tops!
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#2
Also, it's a Rustoleum Gloss Royal Blue ROLL ON job
I've shot many a car in the past, but was really intrigued by this process. About 50/50 mix with mineral spirits and a few roll on sessions!
Hard to see with high iso night grain:
![]()
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#3
In for daytime shots.
EnthusiastRevolution.net | Driven by Unity
http://www.enthusiastrevolution.net
facebook.com/EnthusiastRevolution
twitter.com/EREVV
#4
#5
██████████████████Originally Posted by Jeremy Clarkson
Vote Yes To Create A 3rd Gen 2.0 TSI Section!
#6
I remember Hot Rod magazine doing this on a Falcon or something and it turned out alright after some wet sanding. From what I recall only certain colors and types of paint would work for roll on method. I too would like to see the paint when outside.
#7
I'm tired of these broke ass paint jobs. Serious, the real deal is not that expensive and looks 20,000 times better.
Go to your auto-paint store, ask to check out there extas... and boom, some SW 7000 for $50.
![]()
#8
Last edited by nismo4life; 10-09-2011 at 12:43 AM.
#9
Did you polish this already? If not, I have to say I'm impressed you got it that smooth with a roller.
Here's afor rusto/oil paint jobs.
Tobias
90 Corrado TDI, 84 Scirocco GTi, 75 Scirocco 1.8T, 09 Triumph Bonneville
#10
good looking roll jobs:
this one was even brushed on:
http://www.volksforum.com/forum/showthread.php?t=47971
![]()
Welcome to the internet:
Where men are men, women are men, and little girls are FBI agents.
Member of VOLKSFORUM.COM
"I like my women like i like my coffee,.... plastic cup"-Eddie Izzard.
#13
|˙˙ʇǝuɹǝʇuı ǝɥʇ uo ʇxǝʇ uʍop ǝpısdn ɯopuɐɹ pɐǝɹ noʎ :ǝɯıʇ ǝǝɹɟ ɥɔnɯ ooʇ ʎɐʍ ǝʌɐɥ noʎ ןןǝʇ oʇ ʍoɥ˙˙˙|http://hotlinktest.com/
#14
|˙˙ʇǝuɹǝʇuı ǝɥʇ uo ʇxǝʇ uʍop ǝpısdn ɯopuɐɹ pɐǝɹ noʎ :ǝɯıʇ ǝǝɹɟ ɥɔnɯ ooʇ ʎɐʍ ǝʌɐɥ noʎ ןןǝʇ oʇ ʍoɥ˙˙˙|http://hotlinktest.com/
#15
You don't recognize him from posting in TCL?
I assume he has a rather stressful job/life, because he always seems rather intense in his posts.
But I do agree that if one can scratch together the means/equipment to get a proper paint job (even if sprayed outdoors), it will be a much better paint job and will lats longer.
IIRC- these roll on rustoleum jobs fade after a year or two.
|˙˙ʇǝuɹǝʇuı ǝɥʇ uo ʇxǝʇ uʍop ǝpısdn ɯopuɐɹ pɐǝɹ noʎ :ǝɯıʇ ǝǝɹɟ ɥɔnɯ ooʇ ʎɐʍ ǝʌɐɥ noʎ ןןǝʇ oʇ ʍoɥ˙˙˙|http://hotlinktest.com/
#16
Roller paint job here. No ****s given
More of this car, http://www.youtube.com/watch?v=pqy3XMK8RYc. Frowned upon, but whatever.
Add me on FB and follow me on Instagram! | #TPG | #FLOSSfilthy | #V2LAB |
Always looking for cars in the NC/VA area for feature shoots! PM me!
#17
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#18
Once again, you buy $30 in garbage paint... you then spend $30 in thinner and $100 in shop supplies... and get a garbage paint job.
Or, you go buy some single stage PPG, SW et al for $50 thats in the bargin bin at your local pain-tstore... borrow a gun, borrow a compresor (or buy a HF gun, or rent both, $35 a day) and spray on a quality paint that will cost you maybe $50 more. If you can't spare the $50 you have no business painting you car anyway, you should be using all that time rolling, sanding and re-rolling to find a second job.
#19
#20
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#21
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#22
#23
In for smoothness shots.
Women are gentle and soft, but they hit things...
20v AEB Corrado Build thread.
Parting a B4 ABA Passat?
#24
are these 1ft, 10ft, or 50ft paint jobs? 600px pics suck in this situation
#25
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#26
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#27
#28
#29
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ
#30
#31
Corbic is mad. Few other people called you out in some other threads here. Why so mad?
30 coats? That's just wrong, lol.
MOEW: ٩(●̮̮̃•̃)۶ Zomg Zombies ٩(-̮̮̃-̃)۶ ٩(-̮̮̃•̃)۶ ٩(×̯×)۶ ¯\(°_o)/¯
If you have a problem with anything I do here, feel free to call me on my cell to discuss at anytime: (781)452-2079 LEAPRZ