A New Beginning-My CC Build

[illestCC.10]

Nice car man!

I also built the air setup in the spare wheel area..

Here`s a pic..


Do tell if I should remove the picture..

It`s not done yet tho..

Thanks man. I've been looking for something like this. I was wondering about the board on the left and the right since the carpet falls down under weight with the foam parts holder still in there. Did you drill them straight into the body? and what type of wood?

[Ampiler]

The original carpet has a metal beam in it, across over the top.

But if i have any heavy on the carpet it will bend down.. so i`m thinking about making a new floor out of 16mm MDF.

The board on the left and right is just put there now, and it is formed just like the original carpet but cut out where the system is. its a tight fit and it will not slide around back there.

The board :

[illestCC.10]

The original carpet has a metal beam in it, across over the top.

But if i have any heavy on the carpet it will bend down.. so i`m thinking about making a new floor out of 16mm MDF.

The board on the left and right is just put there now, and it is formed just like the original carpet but cut out where the system is. its a tight fit and it will not slide around back there.

That helps a lot. I'm just waiting on everything to come in the mail still and this whole thing will be underway. Thanks again

[Ampiler]

That helps a lot. I'm just waiting on everything to come in the mail still and this whole thing will be underway. Thanks again

No problem Just ask if you have more questions.

[illestCC.10]

Well no updates for another roughly 2-3 weeks ...seems as though my BagYard Classics rear bags are taking longer than expected to get to Bag Riders from Austria so the kit I order on January 19th won't get to be until the week of May 12th Well it will all be worth it in the end...

[ECS Tuning]

Good work!

In for more

[Seki]

[illestCC.10]

Good work!

In for more

Once the bags are on many pictures will be coming

[Bthasht]

Well no updates for another roughly 2-3 weeks ...seems as though my BagYard Classics rear bags are taking longer than expected to get to Bag Riders from Austria so the kit I order on January 19th won't get to be until the week of May 12th Well it will all be worth it in the end...

Hey are they going to send you your managementand front bags? You could always go RE or SS bags with D cups while you wait? So I guess no install on sunday then

[illestCC.10]

Hey are they going to send you your managementand front bags? You could always go RE or SS bags with D cups while you wait? So I guess no install on sunday then

I was going to text you tomorrow man. They just sent the management and front bags today. Should be here before the weekend

[Ampiler]

Why wait so long?

Bag Riders have it in stock?

http://bagriders.com/modlab/products...-REAR-KIT.html

[Bthasht]

Why wait so long?

Bag Riders have it in stock?

http://bagriders.com/modlab/products...-REAR-KIT.html

Not sure what your talking about, but bag riders rears are not i'm stock. His are coming from Austria. He helices in waiting for quality. Can't hate on that.

Sent from my LG-E739 using Tapatalk

[Ampiler]

INVENTORY STATUS:
In Stock


Follow the link : http://bagriders.com/modlab/products...-REAR-KIT.html
............

[Ampiler]

Not sure what your talking about, but bag riders rears are not i'm stock. His are coming from Austria. He helices in waiting for quality. Can't hate on that.

Sent from my LG-E739 using Tapatalk

+ And i fully understand that he will wait on Bagyard Classics.

[illestCC.10]

Yeah I'm still waiting on my BagYard Classics for the rears. THey should be here in a week and a half.

For the meantime, however, I installed my front bags

[illestCC.10]

INVENTORY STATUS:
In Stock


Follow the link : http://bagriders.com/modlab/products...-REAR-KIT.html
............

They state "In Stock" on the site but they aren't actually there. They just haven't updated the website to the status of the classics unfortunately.

[Ampiler]

Oh.. Ok

Wow.. now i also need a notch... hehe

[bacardicj151]

Oh.. Ok

Wow.. now i also need a notch... hehe

Notch is needed?

[illestCC.10]

Notch is needed?

Yes this is with a notch and the FSB not attached.

[snobrdrdan]

Thanks man. Drive by, take off, and highway videos coming soon

update?

[illestCC.10]

update?

Not yet. I've been way too busy lately. I will try to get it done next week when i get back from out of town

[B.A.G]

Yes this is with a notch and the FSB not attached.

Does this really make such a difference without the FSB attached? Is there no risk driving your car without FSB attached?

[Bthasht]

Does this really make such a difference without the FSB attached? Is there no risk driving your car without FSB attached?

Ill answer for him because he is out of town.
Yes a notch is needed when on air or super low on coils. Passenger side will hit the frame causing damage to axle. It will also sit on the axle making passenger side sit higher when aired out. Him and his people notched mine and i'm on coils. So air it is needed.
Sway bar will also hold the car up when aired out or low on coils. There is zero risk of not running the bar. Mine is not hooked up not is his with zero issues. You won't even notice the difference unless your cc is a racekor. He does have adjustable endlinks that i'm sure he has not hooked up yet. Mine are in route via UPS as I type. These will allow you to still go low due to the adjustments you can make. Hope this answered your questions.

Sent from my LG-E739 using Tapatalk

[kimchi29]

Bthasht hit the nail on the head.

My car is also notched and I am running with no FSB. The car does wallow a bit more and a bit more body roll but i drive low so doesn't really affect me.


@illest My setup is also in the all hidden in the trunk. theres like 2 screws that hold that metal bar on the back of the carpet in place. I just removed that and it sits fine. I also throw the gorilla mat over that. I do plan to redo the setup for this show season but lets see if i get my lazy ass up to do it haha.

kind of a bad pic but you get the idea

[B.A.G]

Ill answer for him because he is out of town.
Yes a notch is needed when on air or super low on coils. Passenger side will hit the frame causing damage to axle. It will also sit on the axle making passenger side sit higher when aired out. Him and his people notched mine and i'm on coils. So air it is needed.
Sway bar will also hold the car up when aired out or low on coils. There is zero risk of not running the bar. Mine is not hooked up not is his with zero issues. You won't even notice the difference unless your cc is a racekor. He does have adjustable endlinks that i'm sure he has not hooked up yet. Mine are in route via UPS as I type. These will allow you to still go low due to the adjustments you can make. Hope this answered your questions.

Sent from my LG-E739 using Tapatalk

Thx a lot for the information! Is it a hard work to take away the sway bar? I'm curious to see the difference with and without it

[Bthasht]

Thx a lot for the information! Is it a hard work to take away the sway bar? I'm curious to see the difference with and without it

It is very easy to disconnect it. Just remove wheel, take nut off end of link, use a jack under control arm to raise until you can push end link out of strut mount. Once that is done remove the bottom nut of sway bar and remove link. That's it. Now the bar is going to rattle in there, but turn up radio you will not notice. Only way to get bar out involves alot of work. It will not harm a thing sitting in there it has mounts to the body so it will not move or fall out.

Sent from my house using Tapatalk

[kimchi29]

It is very easy to disconnect it. Just remove wheel, take nut off end of link, use a jack under control arm to raise until you can push end link out of strut mount. Once that is done remove the bottom nut of sway bar and remove link. That's it. Now the bar is going to rattle in there, but turn up radio you will not notice. Only way to get bar out involves alot of work. It will not harm a thing sitting in there it has mounts to the body so it will not move or fall out.

Sent from my house using Tapatalk

or do what i did and cut that bitch out haha

[snobrdrdan]

Thx a lot for the information! Is it a hard work to take away the sway bar? I'm curious to see the difference with and without it

Disconnecting the front sway bar (like Bthasht just said), is super easy

Removing the sway bar though is a little more intensive....you gotta drop the front subframe

[Ampiler]

Moar pics!

[illestCC.10]

Moar pics!

Waiting for the rear bags and a little free time. Hopefully they will be here this week.

[Bthasht]

Waiting for the rear bags and a little free time. Hopefully they will be here this week.

Hopefully your not all sunburnt up and extremely hung over from your past week. Check the new thread Danny did for your pics when ready

[illestCC.10]

Hopefully your not all sunburnt up and extremely hung over from your past week. Check the new thread Danny did for your pics when ready

Will do man. Thankfully not sunburnt...

[bacardicj151]

Moar pics!

Seriously

[Ampiler]

Seriously

What is it dude?

I just want to see more of the bagged front with c-notch.. seriously.

[bacardicj151]

What is it dude?

I just want to see more of the bagged front with c-notch.. seriously.

I meant I seriously want to see some more pics