88 16V Scirocco Part out

**dvn02** · 11-28-2011 10:51 PM

So it has come time to part out my 16V scirocco. I was rear ended by a semi this past spring and have not found a suitable donor car or the time to start all over again. The engine/tranny and exhaust have been removed so far. I will be removing more during the week and then hopefully getting some photos.

The hatch and rear are DUNN as well as the drivers door. THe front fenders are still good as well as the passenger door. Hood is ok other then a minor ding on the front passenger side. Glass is complete in the front of the car. The interior is ok other then the drivers seat (its busted in about 3 spots from the rear ending).

THe engine has approx 8000km since it had a rebuild. Tranny has about the same since it had all the seals replaced.

Parts so far off car and for sale. I will be adding prices and photos when I get a chance as well as adding to this list. If there is anything that you need that is not on here let me know. The dash is cracked in 2 places now and I will getting the wiring out shortly.

Prices do not include shipping

1. 1.8L PL Engine $500
2. 2Y Close Ratio Tranny $400
3. Neuspeed Upper and Lower Stress Bars $75 ea

4. Neuspeed Strut Bar (Poly Bushings)$ 150
5. 2.25" TT SS Exhaust (No Cat) $250

6. Borla Muffler

7. 2.25" TT SS Downpipe w/ O2 bung. $200

8. Fuel Distributor and injectors (c/w ss lines) Fuel Dizzy $75.00 Injectors $75 SS Lines $35
9. New Engine Mount Kit (HD)
10. New Fuel Filter. $10.00
11. 15" BBS RA's (polished lip with black, 205/15/55 with 75% tread left) $700.00

12. Radiator $40
13. Fan w/ Shroud $20

New
14. Hatch Struts
15. Rear Lower Sway Bar
16. Fuse Box
17. Gas Tank
18. Fuel Pump
19. Inner Tank Pump
20. Accumulator
21. Side Tank Filter
22. 4 Point Lower Stress Bar
23. Hood
24. LF Fender
25. RF Fender
26. Passenger Door
27. ECU
28. Headlight Setup
29. Knock Box and Sensor
30. O2 Sensor/Coolant Temp Sensor/Thermotime Sensor
31. Distributor

30.

**Teighlor O'** · 11-29-2011 08:22 AM

Originally Posted by dvn02

So it has come time to part out my 16V scirocco. I was rear ended by a semi this past spring and have not found a suitable donor car or the time to start all over again. The engine/tranny and exhaust have been removed so far. I will be removing more during the week and then hopefully getting some photos.

The hatch and rear are DUNN as well as the drivers door. THe front fenders are still good as well as the passenger door. Hood is ok other then a minor ding on the front passenger side. Glass is complete in the front of the car. The interior is ok other then the drivers seat (its busted in about 3 spots from the rear ending).

THe engine has approx 8000km since it had a rebuild. Tranny has about the same since it had all the seals replaced.

Parts so far off car and for sale. I will be adding prices and photos when I get a chance as well as adding to this list. If there is anything that you need that is not on here let me know. The dash is cracked in 2 places now and I will getting the wiring out shortly.

1. 1.8L PL Engine
2. 2Y Close Ratio Tranny
3. Neuspeed Upper and Lower Stress Bars
4. Neuspeed Strut Bar (Poly Bushings)
5. 2.25" TT SS Exhaust (No Cat)
6. Borla Muffler
7. 2.25" TT SS Downpipe w/ O2 bung.
8. Fuel Distributor and injectors (c/w ss lines)
9. New Engine Mount Kit (HD)
10. New Fuel Filter.
11. 15" BBS RA's (polished lip with black, 205/15/55 with 75% tread left)
12. Radiator

Pm sent..

Man im sorry about yer accident. Thats something i can only imagine. I hope yer feeling better.

-t

**jreed1337** · 11-29-2011 11:12 AM

where are you located?

**rshaw715** · 11-29-2011 07:00 PM

PM Sent

**84SciroccoGTI** · 11-29-2011 07:52 PM

PM sent

**16vnc** · 11-29-2011 09:53 PM

sent pm thanks

**dvn02** · 11-29-2011 10:04 PM

PM's replied

I am located in Edmonton Canada

**1pullgone** · 11-29-2011 10:07 PM

how much for the motor?

**16vnc** · 11-30-2011 12:08 PM

Originally Posted by dvn02

PM's replied

I am located in Edmonton Canada

Oh sorry. For some reason i thought you were in the UK and had a UK front plate which is what im looking for.

**dvn02** · 11-30-2011 10:09 PM

I also have parts for an 82 if anyone is looking.

**mad8vgti** · 12-01-2011 11:15 AM

pasenger side motor mount bracket?

**daniboy1_2_3** · 12-01-2011 11:52 AM

Do you have an inlet manifold for sale?

**rshaw715** · 12-01-2011 02:02 PM

You have a PM.

**dvn02** · 12-01-2011 11:00 PM

pms replied and pics added prices to follow

**jreed1337** · 12-02-2011 10:54 AM

price on the downpipe and muffler shipped to 94558?

**steady dubbin'** · 12-02-2011 10:26 PM

how much for the upper stress bar shipped to 33316?
thanks

**SeattleDownhill** · 12-03-2011 04:46 AM

I would love your upper stress bar...... How much shipped to 98146? I'm ready to buy!

**rshaw715** · 12-03-2011 02:07 PM

Another PM sent

**dvn02** · 12-03-2011 05:00 PM

PRices Updated

PMs replied

**LubsDaDubs** · 12-03-2011 06:06 PM

Hey Darren still waiting for call to come pick up parts!!!

**86scirocco** · 12-04-2011 10:43 AM

Any good suspension parts?

**dvn02** · 12-04-2011 09:30 PM

New pics and pms replied

**dvn02** · 12-05-2011 10:59 PM

New parts have been added photos to follow with pricing. All pm's replied to , parts pending once sold i will update what is there and not there.

THanks

Darren

**dvn02** · 12-06-2011 10:17 PM

HD motor mounts -Sold
Motor Mount Brackets - Sold
TT Downpipe - Sold

Upper/Lower - Pending
Exhaust - Pending

New Parts

Steering Column
Dash (2 cracks)
Steering Wheel
Complete Wiring Harness
Instrument Cluster
GLove Box w/ 16V lid
HEadlight Assembly's w/turns
Front Bumper and cover
Overflow Bottle w/hoses

I will add to first list tomorrow.

**pqgti** · 12-07-2011 06:51 AM

How much for the instrument cluster if functional to 01960, Peabody mass

**dvn02** · 12-08-2011 10:23 AM

Upper Stress Bar back up for sale

**hxcdubbin239** · 12-10-2011 08:56 PM

I'm interested in the ss lines that come off fuel dist. Send me a pm. Thanks

**brok3n** · 12-10-2011 10:47 PM

I'm interested in the power steering lines if you have them.

Thanks,
-Mike

**SeattleDownhill** · 12-11-2011 12:32 PM

Originally Posted by dvn02

Upper Stress Bar back up for sale

I'm interested! How much to ship to 98146 in seattle?

**brownscarab** · 12-11-2011 12:52 PM

how much for the inside and outside fuel pumps both sent to 78520

**dvn02** · 12-11-2011 11:19 PM

All stress bars have been sold.

**dvn02** · 12-14-2011 10:23 AM

All front and back brakes have been sold (inlcuding prop valves/booster/pedal assemble/spindles/hubs)

Gas tank is sold as well as power steering rack/lines

**rshaw715** · 12-16-2011 12:51 PM

PM Sent

**Petey1985** · 05-20-2012 08:08 PM

on the back side of the fuel distributor there is a little gray box with a wire connected to it, was told its a fuel pressure regulator. If it doesn't leak and you still have one, let me know... call my cell 414 975-4567 Petey

**scirocconaut** · 05-23-2012 05:18 PM

Is it non ac? I need the non ac alternator bracket and the alternator

VWVortex

Thread: 88 16V Scirocco Part out

Thread Tools

Search Thread

Display

88 16V Scirocco Part out

16V Rocco Partout

engine

16V Partout

16V Partout

parts

new parts

update

Interested

fuel pumps

16V partout

fuel pressure regulator

Posting Permissions