Pics added
#1
I Have been parting this car for sometime now, It has helped out many peeps along the way.I am now going to start cutting out rust repair sections for peeps. What section do you need? What other parts do you need ? The car is located just off I95 near ma/nh line. The car is from FL. Very solid body ! I bought it for various other parts for my CADDY. Parting the rest. 978-745-8500 cell Pics , later.
![]()
Last edited by 59MICROBUS; 07-08-2012 at 05:55 PM.
#4
is it the stock suspension? how are the b pillar seals and the seal for the top above the windshield?
#5
How are the dash vents? I need all 3 of them shipped to 19149.
And the ac/heater bezel with the fan control knob.
#6
stock suspension , the struts , & bearings have been replaced within the last 3500 miles. The seals aren't usable.
#8
Passenger side upper door black trim please. If no cracks/damage.
Last edited by x33; 12-02-2011 at 03:42 PM.
1986 Jetta GLI Wolfsburg - Totaled
1994 Golf w/Neuspeed mods - Sold
1990, 92 Cabriolet - Sold
1993 Cabriolet CE - Summer Driver
2010 Jetta TDI Cup
#9
The struts are staying complete with mount bearings. The pass door trim is gone.
#10
how much for center consol with gauges and poss.wire harness. what color is it,white or black. also will u seperate the speaker pockets from the door cards,if so how much. shipped to 08002
#12
How much for all the side markers if not cracked? Will need the bulb socket and as much wiring as possible for the front 2. Thanks![]()
#13
that looks like a steering wheel cover I see
how much shipped to 91803?
#14
I need the heater/ac blower motor, a gas cap, and the window scraper seals. shipped to 45420
#15
#16
I need all the locks ignition, doors, trunk and keys. Picked a cabby up and lost the key the 2nd day![]()
I live in 06416, depending on the distance I can even come pick em up if you don't want to ship. Thanks!
Last edited by xCLIFxCATx; 12-09-2011 at 08:02 PM.
#17
Good stuff.
#18
i need that drivers fender black trim? velez.boris@yahoo.com well if it hasn't been sold yet
#19
driver side spindle shipped to 94558?
it is for a 100mm axle right?
if so, ill take it! please let me know.
1+3+3=7
#20
looking for all 4 door cards , front 2 speacker pockets, shipped 13029 thanks
#23
#24
i need the passenger side rocker panel of the clipper kit, how much shipped to 85201?
#27
Could you please post a picture of the dash bezel? If it's still available and looks like the right one, then I'll take it.
#28
Got a load reduction relay? If you do, could i get a price shipped to 63376?
#29
Both rear door cards, do you still have them? Ill send you a text for pics
#30
Do you have the engine and transmission?
Let me know. My e mail is vseneriz@coqui.net
Thanks
#31
I am using the 5 spd in my Caddy & the motor is a spare. SORRY !
#32
how much for the top pplease email at nos7114@hotmail.com thanks also seats
#33
how much for the gauge cluster? if everything works in it that is,
#34
I will sell the Cluster for $65 shipped. The top is gone and the seats are still available . Do you want fronts & backs ? are you picking them up ? I will not ship them. $200 for all.
#35
hey what kind of engine does it has b/c Im fully interested in the exhaust manifold, cand u post some picks of it