Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 15 of 15

    Thread: EUROJET Electronic boost gauge kits on sale CHECK EM OUT $110 shipped

    1. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-01-2011 01:23 PM #1


      We're killing the "buzz" with our line of electronic boost gauge kits.
      Our electronic line of boost gauges and platform-specific gauges are guaranteed not to whistle, whine, buzz, or rattle.

      We've designed a gauge that takes the mechanical boost signal from your engine, interpolates the signal inside an electronic junction box, and then sends the electronic signal to your boost gauge, successfully eliminating "buzz," providing pinpoint accuracy, and allowing precise monitoring of your vehicle's boost signal.

      0-35 PSI

      Gauge can be toggled between OEM-style lighting (blue with red needle) and our custom lighting (white with red needle).

      Features
      •Eurojet™ electronic boost gauge
      •Fittings and lines for install
      •430NM OEM-matched LED lighting

      $ 110.00 shipped to your door

    2. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-02-2011 08:24 AM #2
      bump

    3. Member One-Eight GTI's Avatar
      Join Date
      Jan 4th, 2010
      Location
      Duluth MN
      Posts
      3,280
      Vehicles
      01 GTI 1.8T
      12-02-2011 04:28 PM #3
      Quick question, Where does your boost gauge change the pressure from vacuum/boost line into an electronic signal... Do you just run the hose from Intake manifold to the gauge and it changes over from there??? Could you maybe post a few pics of the parts that come with the kit.. Thanks, might be interested in this as my new south performance gauge only goes to 25 psi
      Brute 20mm Connecting Rods, ACL Bearings, Wiseco 83mm Pistons, FSI Crank, AEB Head, CatCams 3658, PagParts GT3076R Bottom Mount V-Banded Turbo Kit, PagParts Garret 550HP Core, VF Engineering Motor Mounts, SEM IM, Labonte W/M, 70mm TB, Tial Q BOV, Tial Wastgate, Turbosmart Dual Stage Boost Controller, Peloquin LSD, Clutchmasters FX400, 910cc Injectors, IE Surge Tank, Eurodyne with Maestro.... PAGPARTS Clear Water Dubs

    4. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-02-2011 04:36 PM #4
      I dont have any pictures at the moment but the kit comes with a pressure sensor that changes the signal to electronic.

    5. Member One-Eight GTI's Avatar
      Join Date
      Jan 4th, 2010
      Location
      Duluth MN
      Posts
      3,280
      Vehicles
      01 GTI 1.8T
      12-02-2011 04:50 PM #5
      Quote Originally Posted by Kenny@Eurojet View Post
      I dont have any pictures at the moment but the kit comes with a pressure sensor that changes the signal to electronic.
      Ok, so I'm assuming that the pressure sensor isn't built into the gauge than, Its seperate
      Brute 20mm Connecting Rods, ACL Bearings, Wiseco 83mm Pistons, FSI Crank, AEB Head, CatCams 3658, PagParts GT3076R Bottom Mount V-Banded Turbo Kit, PagParts Garret 550HP Core, VF Engineering Motor Mounts, SEM IM, Labonte W/M, 70mm TB, Tial Q BOV, Tial Wastgate, Turbosmart Dual Stage Boost Controller, Peloquin LSD, Clutchmasters FX400, 910cc Injectors, IE Surge Tank, Eurodyne with Maestro.... PAGPARTS Clear Water Dubs

    6. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-02-2011 05:13 PM #6
      Quote Originally Posted by One-Eight GTI View Post
      Ok, so I'm assuming that the pressure sensor isn't built into the gauge than, Its seperate
      Yes its a seperate little box you run the vaccum line to and wires run from that to the gauge......real easy to hook up and it comes with instructions

    7. Member Vdubed13's Avatar
      Join Date
      Jun 6th, 2008
      Location
      WEST VIRGINIA
      Posts
      5,624
      Vehicles
      Bagged -Big Turbo -MK4 and Slammed B6 A4 1.8TQ
      12-03-2011 12:46 AM #7
      i have one of these in both my cars and there AWESOME...buy one you wont regret it

    8. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-04-2011 05:14 PM #8
      ya what he said ^

    9. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-06-2011 09:12 AM #9
      bump

    10. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-08-2011 09:31 AM #10
      morning bump

    11. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-14-2011 11:01 AM #11
      Bump

    12. n00b
      Join Date
      Oct 26th, 2011
      Location
      Broomall PA
      Posts
      3
      Vehicles
      mk6 gti
      12-20-2011 10:05 PM #12
      How do I change from oem to white and red?

    13. Former Advertiser
      Join Date
      Dec 29th, 2003
      Posts
      14,765
      12-21-2011 09:21 AM #13
      Quote Originally Posted by mk6nga View Post
      How do I change from oem to white and red?
      Its all done in the way you hook the wires up, Do you have directions?
      red=power
      black=ground
      white= acc. power
      orange=not used if you want the gauge white
      If you want the gauge blue then flip the white and the orange........let me know if you need any more help

    14. Member
      Join Date
      Apr 14th, 2012
      Location
      Bremerton, WA
      Posts
      113
      Vehicles
      13 VW GTI
      08-09-2014 07:09 PM #14
      I bought my gauge used from a seller on here and it didn't come with directions. What is the wiring supposed to be?
      Black=brown
      White= grey
      Red= black/purple?

      This is what I did and have got nothing working. Please help

      Sent from my SCH-I545 using Tapatalk

    15. Member
      Join Date
      Apr 4th, 2005
      Location
      Georgia
      Posts
      1,541
      08-12-2014 12:15 AM #15
      Hmmm, Eurojet is no more.
      Matte Black Drag GLI / Frankenturbo / INA Internals / EPG Atlanta / Stasis Engineering / ATP Turbo / PAG Parts
      http://www.inaengineering.com/
      http://www.bthgwinnett.org
      www.frankenturbo.com

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •