NUBWORKS ABA LRI Intermanicooler AWIC build.

[jettred3]

[sdezego]

That's when I got into vdubs, so it makes me laugh even more.

[jettred3]

Those are the new custom made AWIC hardline fittings Chris made for me and Justin is welding to some 1 inch alloy lines... 7/8 ID/ AN 10 female ends...

[mldouthi]

You sure thats 7/8 ID?? 10an should be 5/8 OD right?

[jettred3]

You sure thats 7/8 ID?? 10an should be 5/8 OD right?

Yeah, it gets a little restricted at the fittings, they press into the pipes 7/8 ID, and reduce it to AN10 or roughly 5/8...

http://www.orangealuminum.com/round-...tubes-386.html

Aluminum 1" OD x 7/8" ID Structural Round Hollow Tube

1" OD x 7/8" ID x 1/16" Wall (1.000" x .870" x .065")

8 Foot Cut Length

Mill Finish, Per American Society for Testing and Materials (ASTM)

6063 Ultra-Corrosive Resistant Architectural Grade Alloy, T5 Temper

[mldouthi]

Yeah, it gets a little restricted at the fittings, they press into the pipes 7/8 ID, and reduce it to AN10 or roughly 5/8...

Ahh I see. I was just making sure I wasnt going crazy. I see now, I just read it wrong.

[jettred3]

[jettred3]

[02vwgolf]

That's my manifold and downpipe on the table in the second picture

Sent from my VS840 4G using Tapatalk 2

[jettred3]

That's my manifold and downpipe on the table in the second picture

Sent from my VS840 4G using Tapatalk 2

Yup, and your manifold was built on "MY HEAD" that I sent to Justin to build the INTERMANICOOLER... now the Nubworks shop ABA head....

[02vwgolf]

Yup, and your manifold was built on "MY HEAD" that I sent to Justin to build the INTERMANICOOLER... now the Nubworks shop ABA head....

This is very true hahaha I appreciate it

Sent from my VS840 4G using Tapatalk 2

[jettred3]

[jettred3]

[jettred3]

[jettred3]

[jettred3]

[jettred3]

[jettred3]

Should be firing up the motor for the first time since the rebuild, this weekend at the latest.