The Official Mk.VI Jetta "Ask a Stupid Question" Thread

[Fendermender]

I don't mind spending a moderate amount of money to get some good tools, but I need to build a starter kit for mucking around with my new GLI. I'm looking to get the Schwaben trim removal tools, but I really have NO idea what else to start. I've searched, but have yet to find a good definitive list that suits my needs. I could use some recommendations for the following.

a.) Jack Stands.
b.) Car Care/Wash products that come highly recommended.
c.) Ratchet Kit. Really like the Wera tools, but I'm not sure what size is appropriate as price fluctuates quite a bit. I was thinking the 3/8" would be ideal.
d.) Gadgets. I love new gadgets and toys. Any item that you feel you could not be without.

Thanks for the input.
-R

If your working on a vw your gonna need a good set of torx bits... As far as brand I only buy snap-on, but they're a little expensive for the weekend warrior.

[Verebs1]

I don't mind spending a moderate amount of money to get some good tools, but I need to build a starter kit for mucking around with my new GLI. I'm looking to get the Schwaben trim removal tools, but I really have NO idea what else to start. I've searched, but have yet to find a good definitive list that suits my needs. I could use some recommendations for the following.

a.) Jack Stands.
b.) Car Care/Wash products that come highly recommended.
c.) Ratchet Kit. Really like the Wera tools, but I'm not sure what size is appropriate as price fluctuates quite a bit. I was thinking the 3/8" would be ideal.
d.) Gadgets. I love new gadgets and toys. Any item that you feel you could not be without.

Thanks for the input.
-R

I got a bunch of stuff at Harbor Freight, comes with warranty and cheap. Torx set 10-50 should be good. Also the plastic pry tool set and a triple square tool.

[IslaTurbine]

I don't mind spending a moderate amount of money to get some good tools, but I need to build a starter kit for mucking around with my new GLI. I'm looking to get the Schwaben trim removal tools, but I really have NO idea what else to start. I've searched, but have yet to find a good definitive list that suits my needs. I could use some recommendations for the following.

a.) Jack Stands.
b.) Car Care/Wash products that come highly recommended.
c.) Ratchet Kit. Really like the Wera tools, but I'm not sure what size is appropriate as price fluctuates quite a bit. I was thinking the 3/8" would be ideal.
d.) Gadgets. I love new gadgets and toys. Any item that you feel you could not be without.

Thanks for the input.
-R

Car Care/Wash:

Meguiar's Microfiber wash mitt
Cheap microfiber wash mitt for wheels and exhaust tips
Gloss-It microfiber drying towels (x2)
2 gallon bucket for washing your wheels
5 gallon bucket for clean water
5 gallon bucket for soap water
Grit Guard 5 gallon bucket inserts (x2)
High quality car shampoo (Meguiar's Gold Class at a minimum)
AutoGeek Foamaster wash gun
Gloss-It Detail Spray

Voila! Clean car with minimal damage to your clear coat.

[dh71704]

I will be installing the right side steering wheel controls and I have one really dumb question, one kinda dumb question, and one not so dumb question.

(dumb)
Do I need to disconnect the battery before removing my airbag.
(kinda dumb)
If I have to have the battery disconnected for the airbag, should I leave it unhooked while installing the right side controls on the steering wheel and putting the airbag back on.
(not so dumb)
If I unhook the battery do I need the radio code to get my tunes back.

[Clyde Smith]

No need to disconnect the battery, just keep the ignition off, and the key out while you're working.
It is recommended to disconnect the ground cable.

If you do, you won't need the radio code. You'll only have it disconnected for 20 minutes at most

[Carlos91]

Completely off topic but no better place to ask. Wheres the black jetta thread? I was away for a month and just got back and can't seem to find it. Yes I've searched but haven't found it. Not even under my subscriptions.

[flytech78]

Is the wheel bolt pattern the same on the mk6 as the mk4?

[Clyde Smith]

No. Mk4s are 5x100.
Mk5 & Mk6 are 5x112.

[dbojadzic0]

I have a question for all that have 18" or 19" aftermarket wheels with stock brakes on your jetta..is there a big difference in braking power or stopping distance?

[Rawcpoppa]

I will be removing my fog light covers in order to replace the lower grill and I would like to know what is the best tool to remove them?

Pry tools? Flat head screwdrivers wrapped with masking tape?

[Verebs1]

I will be removing my fog light covers in order to replace the lower grill and I would like to know what is the best tool to remove them?

Pry tools? Flat head screwdrivers wrapped with masking tape?

I use the pry tools from harbor freight. I tried to use screwdriver before I got them and messed up the paint on the inside of the cover. Be careful if you bend the bumper too much the paint comes off in big chunks

[Rawcpoppa]

Thanks. Any other tips for removing the foglight covers and lower grille? Best location to start?

[Verebs1]

Thanks. Any other tips for removing the foglight covers and lower grille? Best location to start?

Start at the top. And If you are going to remove the lower center be very careful.

[EuroTrade]

can we adjust camber? i know the mkv can! i need!!! lmk

[dc5rn]

So I'm taking an 1100mile road trip, should I use painters tape to protect the hood?!? Or just take the chance?! No time to do the clear bra

[monster20v]

I've used painter's tape before on long trips, its def worth it. I would recommend

[dc5rn]

just wasn't sure about the adhesive sticking to the paint... I go the 3m no residue stuff.

[apmarsh44]

While looking for one online, I came across a thread in the GolfMK6.com forum where some people were having issues with fitting the oil cap correctly and actually had to make some adjustments for the cap to fit. Find this hard to believe, but would like for someone to shed some light on this before I spend 40 bucks. So does anyone know if the cap will fit the 2.0 TSI without modification??Thanks in advance!

[dc5rn]

I have 5600 miles... Should I get it oil changed or
Wait until 10k?

[AndriyNYW]

I have 5600 miles... Should I get it oil changed or
Wait until 10k?

i have 11k already on GLI n had oil change at 10k

[NotLowEnough]

I have 5600 miles... Should I get it oil changed or
Wait until 10k?

I change mine every 5k with dealer oil and OE filter. 10k OCI's will never sit well with me.

[Clyde Smith]

^ This.
I plan on doing a change w/filter at 5k, and then 10k maintenance thereafter. Always synthetic, always the OE filter.

[AndriyNYW]

anyone smart thinks tht this chinise thing will work on GLIs?!

http://www.ebay.com/itm/NEW-CHROME-E...2eb7b3&vxp=mtr

[Verebs1]

anyone smart thinks tht this chinise thing will work on GLIs?!

http://www.ebay.com/itm/NEW-CHROME-E...2eb7b3&vxp=mtr

That will work but why not get one with the correct chrome? Look for ones with matte chrome so it matches.

[AndriyNYW]

That will work but why not get one with the correct chrome? Look for ones with matte chrome so it matches.

matte chrome?!can u find me one on ebay for Gli?plz

[Verebs1]

matte chrome?!can u find me one on ebay for Gli?plz

This should be what you need.

It was just a few items down from the one you had found. If you are looking to do all of your switches I recommend you get them from Bold-Sport since it will be cost effective, the individual switches are hard to find on eBay.

[AndriyNYW]

This should be what you need.

It was just a few items down from the one you had found. If you are looking to do all of your switches I recommend you get them from Bold-Sport since it will be cost effective, the individual switches are hard to find on eBay.

i just need the euro headlight switch for my GLi. Thanks for the one u found for me, but r u sure its gonna work on GLI?!

[Verebs1]

i just need the euro headlight switch for my GLi. Thanks for the one u found for me, but r u sure its gonna work on GLI?!

I don't see any reason it wouldn't work. As long as you have a GLI it should be an exact fit. Check the GLI headlight switch removal DIY so you can compare the plugs or better yet look at your own switch. Also you should be able to turn your switch around easy on the forum classifieds or CL or ebay.

[NotLowEnough]

i just need the euro headlight switch for my GLi. Thanks for the one u found for me, but r u sure its gonna work on GLI?!

I don't see any reason it wouldn't work. As long as you have a GLI it should be an exact fit. Check the GLI headlight switch removal DIY so you can compare the plugs or better yet look at your own switch. Also you should be able to turn your switch around easy on the forum classifieds or CL or ebay.

GLI Euroswitch is the same as the Mk.5/6 Golf and GTI.

[AndriyNYW]

GLI Euroswitch is the same as the Mk.5/6 Golf and GTI.

aight thnx to u all im going to get tht now... and verebs also my swtich code starts with 3c8 and those all starts 5 something so i wasnt sure and with "auto" function it has B in the end i believe and w/o has A like mine and xsh is color or something so i wasnt sure but thnx to u guys for pointing me into the right direction, thnx im going to shopping haha

[JorgePerez]

can we adjust camber? i know the mkv can! i need!!! lmk

I was hoping someone would reply to this. can we adjust camber with stock suspension?

[AndriyNYW]

anyone no where to get and how to instal(where to put) Hood Shock Strut Damper on 12GLI
thnx

[Verebs1]

anyone no where to get and how to instal(where to put) Hood Shock Strut Damper on 12GLI
thnx

There was a DIY on here and a whole thread about this. Try searching. BTW the car wasn't designed to have one so you would have to cut/drill to mount it and even then it may not work as well as the MK4 / MK5 ones because the hood is longer and heavier.

[Clyde Smith]

I was hoping someone would reply to this. can we adjust camber with stock suspension?

Rear camber on GLIs is adjustable from stock.

[papa1]

Yup