Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 3 of 4 FirstFirst 1234 LastLast
    Results 51 to 75 of 81

    Thread: T3 Touareg

    1. 03-06-2012 10:59 AM #51
      Quote Originally Posted by grohgreg View Post
      Agreed.
      Mine is a pre-earthquake car. It's my understanding that the parking sensors represented a gapfiller solution until such time as Japanese camera production once again satisfied the demand.

      //greg//
      That is correct. Cameras started to appear on vehicles again about 12/18/11 delivery time. So likely build dates from 10/25 on.

    2. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      03-06-2012 09:41 PM #52
      Met fellow Touareg member ....



    3. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      03-06-2012 09:42 PM #53
      and another.....


    4. 03-07-2012 01:05 PM #54
      Quote Originally Posted by kleinbus View Post
      etrailer shows the thingie opposite way (pulling up) which doesn't make sense to me as the trailer is pushing it down?


      When you hit the brakes it will want to push up but I don't think it makes a difference in what way it goes. I'd put it nuts down for a cleaner look.

      John

    5. 03-09-2012 01:21 AM #55
      Quote Originally Posted by kleinbus View Post
      I doubt there is sparkie as the blinker is still active on brake light.

      With right coding the computer should change the brakelight blinker to own bulb and then there should be power...
      First thanks to kleinbus for some help on some tested bulbs, saved me some cash!

      Tonight I was able to install LED taillight bulbs, in the outer housings thanks to your recommendation. In addition to the rear running/brake/turn bulb housing I did what I said I was going to do. I ran a multimeter on the turn socket and found a small current though it could have been a ghost. I then took leads from the + and - off the stock running/brake/turn socket and bridged onto the corresponding + / - on the turn socket. I was able to get power to it and found that there is a tab that is bend downward that completes a circuit between the working running/brake/turn socket and the turn socket. When bridging this I was able to get the turn socket to function in an identical manner as the stock running/brake/turn socket on our US spec 12' touareg.

      It's late and I will get a series of pictures together however knowing this I had ordered 2 of each of these:
      1156-R18-T: Red - stock US spec running/brake/turn
      BAU15S-R18-T: Red - non functional US spec turn

      plugging it in and testing resulted in success however now, if you've looked at the housing you'd see this, the reflector for the US spec turn has no hole to allow for a bulb to be inserted once it is seated on the socket. So I routed out a hole and perfect! only problem is some shavings/dust have collected on the inside of the housing and I can't get it out without heating up the lens and getting it out that way.

      with regard to the small tab that was turned downward, once it was bent up I soldered it to prevent it from shaking loose.

      I am getting no errors and have tested all combinations of the rear taillights. running off, brake, brake/turn, hazard, running on, etc.

      A couple of notes, the led bulbs are red and so the red on the outer housings is a bit "reder" than the inner housings which are still stock bulbs, ok by me. I've tried an led bulbs in there for kicks and it wants to stay on the bright or brake setting, add to the fact that it seems like the bulb is closer to the diffuser and it becomes almost the intensity of rear fogs. I said forget about the inner housings at that point. also the now functioning turn signal area is a tad bit brighter since there is no diffuser.

      I will of course break it down again and take pics of all of the noteworthy steps for those that want to duplicate this for now here is a clip of the lights on and the brake being tapped. The frame rate on my cell phone does not do this mod justice. it is instant as you would expect from any LED, it's bright, and the color is spot on. Don't mind the flicker when the lights are dim, it's just the camera.


    6. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      03-18-2012 01:52 AM #56
      Tail wind effect





      no tricks and I didn't reset on fly, the wind was just right direction...

    7. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      03-18-2012 08:39 PM #57
      Found from other forum (Audi) but not sure have this been shared here in Vortex...


      http://www.youtube.com/embed/nd5WGLWNllA?rel=0

      I would say the transparent factory is form of art...

    8. 03-20-2012 07:06 PM #58
      This was very cool, really makes me think about that custom built for us T3! Of coursre tiffany just wants to go to europe,, forget the special car

    9. Junior Member
      Join Date
      Feb 9th, 2011
      Location
      DFW
      Posts
      84
      Vehicles
      08 VW R32, 09 BMW 135i
      04-05-2012 02:44 PM #59
      Dang I wish I knew about this before, I would have visited, I spent 2 years in Germany

    10. 05-08-2012 01:19 AM #60
      kleinbus and ssato, thanks for all the information you have provided on this page, i find it very useful. I will try the LED interior bulb modification - the stock reading lights are dim and nasty

      I am working on my US model Touareg to change the rear turn lamps to amber because I feel they are much safer than red.

      Did anyone ever get them actually working on a US T3? If so then I request video of rear turn signal

      From what I understand, i need to
      a) flip a tab in cluster to provide power to a currently unused turn socket on the US T3
      b) plug in amber bulbs into turn socket - (what is the correct bulb specification to use?)
      c) cut hole/space in outer trim to accommodate turn bulb
      d) make unknown change in vag-com to make these bulbs flash instead of the red brake bulb when signalling.

      Does this sound correct?

      Alternative but more expensive option is to purchase euro/row rear clusters i guess, there must be a part number for this. but d) vag-com change probably necessary.

    11. Member KPSII's Avatar
      Join Date
      May 19th, 2005
      Posts
      166
      Vehicles
      84JettaGL-94JettaGLS-04TouaregV8-08PAssatLux-12Touareg2Lux-13Beetle2.0T-15A8Sport
      05-09-2012 09:44 AM #61
      Quote Originally Posted by pdot View Post
      kleinbus and ssato, thanks for all the information you have provided on this page, i find it very useful. I will try the LED interior bulb modification - the stock reading lights are dim and nasty

      I am working on my US model Touareg to change the rear turn lamps to amber because I feel they are much safer than red.

      Did anyone ever get them actually working on a US T3? If so then I request video of rear turn signal

      From what I understand, i need to
      a) flip a tab in cluster to provide power to a currently unused turn socket on the US T3
      b) plug in amber bulbs into turn socket - (what is the correct bulb specification to use?)
      c) cut hole/space in outer trim to accommodate turn bulb
      d) make unknown change in vag-com to make these bulbs flash instead of the red brake bulb when signalling.

      Does this sound correct?

      Alternative but more expensive option is to purchase euro/row rear clusters i guess, there must be a part number for this. but d) vag-com change probably necessary.
      I totally agree w/you on the AMBER rear-tail light turn signal - and am very interested...
      KPSII (Bowie, MD - USA)
      87JettGL / 94JettaGLS / 99PassatGLS / 04TouaregV8 / 08PassatLux2.0 / 12TouaregV6Lux / 13Beetle2.0T / 15A8-3.0T

    12. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      05-10-2012 04:26 PM #62
      Yes it will need vag-com work as the computer have to be changed from North America (same brake/blinker) to probably ROW (with red brake and amber blinker).

      This may lead to trailer light issue as it would change the trailer lights to individual brake and blinker lights so American brake/blinker combo doesn't work anymore.

    13. 05-11-2012 10:41 AM #63
      Quote Originally Posted by KPSII View Post
      I totally agree w/you on the AMBER rear-tail light turn signal - and am very interested...

      I agree too on the amber however without VAG coding I settled for the added bulb.

      however if we could just get the rear turn function to completely turn off and on when the parking lights are on we would be in a much better situation.

      I found that swapping out LEDs didn't do much in terms of noticeability since the wattage difference between parking and brake(or turn) is still the same. the difference is just not that noticeable.

      test: go out at night, turn a signal on. compare that to having the parking lights on while signaling. you'll notice now noticeable it is completely off and then on vs. parking/turn(brake). it's terrible in my opinion and almost all current VW's suffer from this.

      I'd buy a VAG-COM solely for this mod simply for safety!

    14. 05-17-2012 11:00 PM #64
      New 2012 TDI TReg owner here! thanks to this thread I got the VIM, LED brightness and Convenience windows activated.

      A note on the VIM -on the last step; to reset the RNS 850 you hold down: Phone + Climate + Nav + Traffic + center knob button


      My current wish list for modifications:
      1. 5 blinks for auto blinker
      2. Change Alt. Speed Display to read in mph instead of km/h
      3. Ability to play video from iPhone on screen (via bluetooth or dock)

    15. Member Yeti35's Avatar
      Join Date
      May 17th, 2006
      Location
      SL, UT
      Posts
      2,003
      Vehicles
      2010 V6 TDI Touareg
      05-18-2012 08:14 AM #65
      Quote Originally Posted by KSpider View Post

      My current wish list for modifications:
      1. 5 blinks for auto blinker
      2. Change Alt. Speed Display to read in mph instead of km/h
      3. Ability to play video from iPhone on screen (via bluetooth or dock)
      1. Try the method for the previous Gen Touaregs for it may not be any different. Worst case is that is just does not work.
      2. Try setting the language to UK English then just change all your units back to standard rather then metric. This worked on the previous gen Tregs as well. Nothing will be harmed and worst case again is it does nothing.
      3. No idea on that one.

    16. 05-18-2012 12:49 PM #66
      Quote Originally Posted by Yeti35 View Post
      1. Try the method for the previous Gen Touaregs for it may not be any different. Worst case is that is just does not work.
      2. Try setting the language to UK English then just change all your units back to standard rather then metric. This worked on the previous gen Tregs as well. Nothing will be harmed and worst case again is it does nothing.
      3. No idea on that one.

      Thanks Ill try 1. next time I vag-com in, #2 ill try this morning...

    17. Junior Member Eugene-Dave-1's Avatar
      Join Date
      Apr 18th, 2012
      Posts
      38
      Vehicles
      2012 Touareg Lux TDI
      05-18-2012 07:21 PM #67
      NHTSA says amber turn signals "may be 5.3% safer than red". I'm not sure I'd call that "Much Safer" but I personally prefer amber over red.

      http://blogs.cars.com/kickingtires/2...nal-color.html

    18. 09-04-2012 12:07 AM #68
      Quote Originally Posted by kleinbus View Post
      Eyeballing groovier tires and maybe slight suspension lift...


      Nitto Terra Grappler is available on....



      - 255/55 R18
      - 255/60 R18




      and the suspension lift is something I have to sort out. I know German SEIKEL makes new struts but I rather spend that 2k for power module to kick out more torque

      Planning to order 25mm think aluminum plates and machine spacers between the shock and chassis

      Time will show what comes out from this cooking

      Oh, good find! would love to have some BF Goodrich All Terrain KO's in this size.

    19. 09-04-2012 12:19 AM #69
      Quote Originally Posted by kleinbus View Post
      Depends what you mean with "recoding".

      In engine, central electronics and trailer control modules is bit (zero or one) depending is hitch installed or not.

      Some says theirs didn't need coding (Jon and few other members).

      My dealer said they had to take mine in for coding so I'm not sure did they BS or did it need the coding as I didn't have my Ross-Tech cable nor laptop nor time to goof around with it as next day Sunday we were heading to 1100 miles trip with trailer so it had to work.

      I have already had my lesson about dealers so I wonder why I ever bother trusting them....

      Who knows if the factory installed hitch is already activated (coded)?

      For sure who ever does the hitch structure installation by themselves and install the trailer module (like I did on my Audi Q5), in such case it will need coding.
      I bought mine with the trailer hitch package and the 7 pin $125 doodad worth $12 on Etrailer.com and my 2012 Sport TDI was already coded for brake lights in the 7 flat prong, here are the readings off of VCDS for factory.

      Byte 18 bit 5 checked off.



      Byte 1, bits 0, 2 and 3 are checked off. sorry for blurry photo.




      And byte 0 bit 1 is checked.



      This may or may not account for preventing the rear door from automatically opening when the trailer is engaged and lights plugged in the 7 blade electrical connector, so check it with your key fob for clearance after long coding before opening your rear hatch with the remote.
      Last edited by Audi5000tdi; 09-04-2012 at 12:23 AM.

    20. 09-04-2012 08:35 PM #70
      Quote Originally Posted by kleinbus View Post
      Few VAG-COM mods...

      Just to be clear, the codes I post may be my discovery or may not. This is not about taking credit from someone elses work as like the Q5 thread where I collected VAG-COM codes and part numbers and DIY service info, this thread is going to follow same structure.


      Bytes have 8 digit counting from RIGHT SIDE (00000000), counting starts from zero, not from one (e.g. 012345... not 12345...) and with alphabets I have marked the individual digit to be changed.



      Zeros and A,B,C etc are just to pinpoint digit itself, zero does not mean you have zero or 1 (different country different settings)
      If VAG-COM does not have explanations on specific bytes then you have to manually overwrite byte.


      Transmission coding updated 25 Feb 2012

      Gear display next to D or S

      Change C,B and A to 1
      02-Auto Trans -> Byte 1: 00010101







      After the coding, reset the transmission with following procedure...

      On P -->
      turn power on (don't start) -->
      press accelerator all way down (to kick down) and keep it floored 30 seconds -->
      release the pedal -->
      turn the power off -->
      get out and lock the doors -->
      unlock the car -->
      start the car and drive off like you normally drive so the transmission learns the drivers driving pattern.
      My 2012 touareg TDI sport on this had a 001368 code on it from the factory... after the change, it showed a 001568 value showing in VCDS.

    21. 09-05-2012 02:37 PM #71
      Quote Originally Posted by kleinbus View Post
      Convenience windows (close or open via keyfob)

      Change A to 1

      46 Central conv, byte 2, bit 2: 00000A00



      Interestingly, with my May 2012 build on a T3 Sport no Nav, with this setting, my windows only close with the KeyFob, they do not open up with the key fob.

    22. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      09-05-2012 03:53 PM #72
      Audi5000tdi,

      Tranny: New code 1568 is correct.

      Windows: I had same issue, go to car menu -> setup -> remote key -> windows (or so) and check either or both front/rear and it will open and close with keyfob.

    23. 09-05-2012 06:57 PM #73
      Quote Originally Posted by kleinbus View Post
      Audi5000tdi,

      Tranny: New code 1568 is correct.

      Windows: I had same issue, go to car menu -> setup -> remote key -> windows (or so) and check either or both front/rear and it will open and close with keyfob.
      Is this on the radio head button or in VCDS?


      Is code 001568 or 1568 ? I now have some oil pressure issues in the transmission showing as being too high with 001568. CEL in on. Not good.

      I have reset to 001368.
      Last edited by Audi5000tdi; 09-05-2012 at 07:10 PM.

    24. 09-05-2012 07:43 PM #74
      Quote Originally Posted by Audi5000tdi View Post
      Is this on the radio head button or in VCDS?


      Is code 001568 or 1568 ? I now have some oil pressure issues in the transmission showing as being too high with 001568. CEL in on. Not good.

      I have reset to 001368.
      DO NOT USE 001568, see this thread and use 001168 if you'd like the gear selector to display the gear. North American 2012 Touareg TDI Sport with a May 2012 build.

      http://www.clubtouareg.com/forums/f6...tml#post321490

    25. Member kleinbus's Avatar
      Join Date
      Sep 8th, 2008
      Location
      USA (& Finland)
      Posts
      412
      Vehicles
      08 Jetta and 12 Touareg TDI
      09-05-2012 08:38 PM #75
      1168 is from from binary calculation from other forum but we couldn't find it been used on any other continent so who knows?

      1568 is from 2011 T-reg with factory coding showing gear display next to D so I asked the member to scan his and send the code.

      After doing quick research I found you are second owner with "newer" build date and this difference might be the new transmission controller with new controller model number.

      I rely on 1568 as it is from German car.

    Page 3 of 4 FirstFirst 1234 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •