#1
Mods, please stop moving/blackholing my thread. Yes they are not 5x112, but they have the correct adapters and came off a 5x112 car.
Selling my set of Kinesis Supercups.
Specs:
5x114.3
Front- 18x8.5 et~44 (26 after 18mm adapter)
Rear- 18x9.5 et~30 with a 215/40 nankang tire
Hubcentric rings for the rear wheels
10 wobble bolts
Adaptec 18mm adapters that are hubcentric to the wheels (60mm bore)
All 4 have tires.
Front tires are 205/40 accelera (one is brand new, drove to sowo and back on it, thats all.)
Rear tires are 215/40 nankang. still good amount of tread, but some camber and cupping on the inside.
They do have some small nicks here and there, and two spots that are little worse that I will point out in pictures.
Asking $2300 shipped within the lower 48 states. or willing to trade for something like Tarmacs+cash.
Rear wheels:
The bad spot on one of the rears..
Front wheels:
the bad spot on one of the fronts..
and one of the faces has some minimal marks that are only noticeable up close..
All 4 wheels:
The wobble bolts and Adaptec adapters:
Pictures of them on a car:
![]()
Last edited by platinumedVR6; 08-07-2012 at 10:54 PM.
EuroImage
PSN: MartyMcFly_
#11
Illstatic GetLow Gengstout Fifteen52 @Sammyscenepoints
I cut stickers.
#13
slam.poke.drop.tuck.dope - Instagram if you have @someguymatt
#17
stop posting your jdm wheels in here boy.![]()
#26
yuksquad.//EE Militia//4EverKustoms