1. Gloss black lip & matte black face
I think this would look super dope !
Time for round 2 of the game, "What the frick is that?"
Who's got this one figured out? Part type and brand if you please
This one arrived yesterday:
What the frick is that, cap'n?
I was doing some editing in this cafe near Tomas Sport Tuning, and I found myself staring at this table. It was telling me that I needed to get a new bit of kit for the whippy.
This 3rd installment of What the frick is that? poses the question what the helk did this table subliminally force me to order. Inanimate or not, it twisted my arm really....
Last edited by iMod.:R; 03-10-2012 at 03:51 PM.
YOU ARE CORRECT SIR!
Gotta build out the bottom end so she holds together well when I figure out what BT I'm going to go with. Picking up parts is on temporary hold status until I sell off the remainder of the APR Stage3 kit.
Nicely packaged and quite the complete set up.
Beers and cheers to the Ferrea quality gear!
*this is not my photo, I found it on the internnetz
Last edited by iMod.:R; 02-28-2012 at 11:41 AM.
Are supplementary injectors going to be used in the intake manifold for this build? I would love to see this type of setup cleanly integrated into the car. It'll really open up the power potential, will maintain the efficiency of the motor at lower power levels, and will keep the intake tract CLEAN!
If somebody doesn't come out with a system to integrate this I may have to do it on my own. Time to start looking for a mock-up motor...
Mechanical Engineer | Certified SolidWorks Expert | Reverse Engineering and Design Services Available
------- 4dr AWD 16V Turbo MK1 Rabbit Build -------