what flange will it fit? T25? and why u selling. Wld you wanna work something out on my gt28 turbo. its been polished, and insides where ceramic coated..
![]()
#1
all right. hopefully i don't get in trouble for bringing this thread back, but turbo is back up for sale. originally i had a new project come up which i wanted to use this for but decided i didn't need another project at the last minute so i am here yet again trying to get rid of this turbo. 500-ish miles. Reason for having such low miles is that the car was deemed unsalvageable after a minor rear end incident (found a TON of rust on structural parts). after this i decided to part ways with my turbo stuff because i had/have no other car to put this on. hence the reason this is up for sale. the car it was used in was a 95 jetta vr6, used on streets, car never really saw boost until it got on interstate or an open stretch of country road, then HOLY HELL! haha it is a t3 turbo with 70a/r compressor housing and 82a/r vbanded exhaust housing. includes
-turbo blanket
-oil feed lines
-oil restrictor
-oil drain adapter
-braided stainless coolant lines
come get it. 900 shipped or shoot me an offer! want to see this thing go!
![]()
Last edited by mk2gti-rob; 04-30-2012 at 02:42 PM.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#2
what flange will it fit? T25? and why u selling. Wld you wanna work something out on my gt28 turbo. its been polished, and insides where ceramic coated..
![]()
#3
Selling because I don't need. And cash only. Would trade but have nothing to turbo right now and looking to finish some other projects. 99% sure its a t3. Not a big turbo person. Haha but fairly certain.![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#4
thats ok, I think I just sold mine. So I may have cash for u instead.
#6
what size hotside, that would help the buyer. Should say on the side, probably .63ar.
#8
hey I can cut and paste too
but that doesnt tell us what hotside this turbo is
#9
70a/r compressor housing
82a/r turbine housing
t31 housing
from what i remember. i'll double check
Last edited by mk2gti-rob; 02-02-2012 at 09:28 PM.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#10
yep, thats the specs on this.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#12
had a cheap "atp style" clone manifold but not the first clue where that is at the moment.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#13
Birthday weekend bump.
Last edited by mk2gti-rob; 05-03-2012 at 04:30 PM.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#14
If only it was 63 hotside
MY BUILD | 2003 Volkswagen GTI 1.8T | CTT - Carrot Top Tuning - GT3076r, 3" to 2.5" turboback exhaust (vbanded), Tial 38mm wastegate, fx400 6 puck, Peloquin LSD, VF Poly Engine Mounts, Greddy Profec B Type II, walbro 255 inline fuel pump, ID1600cc @ 3bar running on e85. AMB head, AWD bottom end. 424whp 369wtq @ 30psi (OLD: 383 whp 333wtq @ 23 psi)
#16
Sounds good.![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#17
Still here. Need cash for wheel fund![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#18
up top. pm me with any offer, never know..... i might be able to accept it.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#19
still no offers? i can make someone a good deal on this. just pm me.![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#20
im going to get this thing if no one gets it first. end of the week forsure![]()
#21
thats cool man. just shoot me a pm and i'll let you know if it's still here. might even cut you a little deal on it![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#22
top
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#23
back for sale.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#24
Up
Sent from my DROIDX using Tapatalk 2
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#25
This is a nice price for a V banded legitt 35r. People that arent familar to turbos should know that the garett 35r is the best rounded turbo ever created not to mention being Dual ball bearing can take WHATEVER boost your motor can handle and just serious abuse. GLWS.
#26
Thanks. Ttt![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#28
will try my best to call you today^ i got another guy i gotta call too, and a couple people pm'ing me.... hard to keep up! haha. first one with cash gets it.![]()
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#29
updated the original post with what car it was on and why so low of mileage.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#30
can you show a pic of the garrett label on the chra just to show it actually is a real garrett
#31
^done. ttt
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#32
Up. Txt 419-979-8802 for fast response
Sent from my DROIDX using Tapatalk 2
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#33
morning bump.
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#34
Ttt
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip
#35
sale pending
2011 GTI- CCW LM20's, APR stage 2, B&G RS2 coils, forge twintake, forge catch can, eurojet 3" tbe, dg short shift, bsh mounts, OEM led tails and osir front lip