Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 35 of 139

    Thread: My New Mk3 Golf! What to do first?

    Hybrid View

    1. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-05-2012 05:40 PM #1
      Hey everybody, been lurking around vwvortex for a while now more or less just trying to absorb as much knowledge as I can. Well, the day finally came... yesterday I purchased my first VW. A black 1998 Golf Mk3 GTI! I've only had it for 36 hours and already I can say that I absolutely love it.

      And without further adieu, PICS!

      Pretty clean overall, a few small issues here and there but all-in-all I'm more than happy with the outcome. Also, if anyone knows where I could find a replacement rocker panel for the passenger door, lemme know because mine is rusted.


      Straight, clean, almost completely stock (except sound system) and drives like a champ.


      105k miles on the clock, super clean interior.
      I do have a question though, does anyone know what that little toggle switch above the purple diagnostic port is? I've asked a few guys and nobody knows what it is...


      Ahh... the pièce de résistance. This VR6 is the lifeblood of my new baby and I cannot WAIT to pump out some serious power with it.


      The car isn't perfect, nor is it a clunker. These next few months may be a little rough what with college and being low on spending money but in the end I know this car will go the distance.

      So, I wanted to put it to you guys and see what you thought: What are some good low-budget, college-kid mods you can do to these cars? I'm totally open to anything and I wanna get the brain juices flowing so I need some suggestions.

      EDIT:
      Changed the title seeing as how my GTI is no longer *new* to me, plus I finally decided on a name for it. I quite enjoy the comparison between a VR6 and the sound Chewbacca makes so... Wookie it is!
      Last edited by Eskimio; 06-28-2012 at 12:39 PM.

    2. Member Sonic303's Avatar
      Join Date
      Nov 13th, 2009
      Location
      5280 ft above you
      Posts
      1,901
      Vehicles
      Jetta, M3, S4
      02-05-2012 06:02 PM #2
      Man, I love black GTis!

      For power you might want to add a metal headgasket from the fourth generation VRs ('99-01.5)
      Cold air intake or leave your stock airbox and get a chip tune and exhaust. That's pretty much it for low budget without going over the top. Lower it, keep it clean and you should be good.

    3. Member Dutchsider's Avatar
      Join Date
      Apr 27th, 2006
      Location
      Population Increase, PA
      Posts
      15,287
      Vehicles
      '01 S4, '92 Gti
      02-05-2012 06:05 PM #3
      If one rocker is rusted out, you likely have a lot more rust elsewhere. I'd pull up the carpet and inspect the floor pans, strut towers and behind your side skirts.
      "Builds a sh*tty/ugly car, gets made fun of, calls everyone a hater" - Dubbers
      If you wish to get a hold of me, EMAIL IS THE BEST WAY Dutchsider2@yahoo.com

    4. Member
      Join Date
      Sep 3rd, 2011
      Location
      Milwaukee, WI
      Posts
      604
      Vehicles
      1996 Jetta GLX VR6
      02-05-2012 06:19 PM #4
      That toggle switch is custom. Thats where the OEM rear window switch went. It might be to turn on an amp or something like that.
      Quote Originally Posted by X37 View Post
      I'm drunk and your thread annoys me.
      Quote Originally Posted by swirvtheman View Post
      And then when im on the on ramp to the highway I punch it and wind out 3rd gear and hear that intake and the exhaust together in perfect harmony as it rips a humongous hole in the ozone layer and causes the spontaneous explosions of tree huggers faces.

    5. 02-05-2012 06:22 PM #5
      What to do first? Maintenance. Then worry about go fast bits.

      ECStuning.com sells replacement rockers for like $30-$40.

    6. Member BASKUTKAYZ's Avatar
      Join Date
      Aug 11th, 2007
      Location
      610
      Posts
      196
      Vehicles
      mk3 glx, mk3 trek, mk2 coupe, mk4 golf, mk4 gti, mk2 coupe
      02-05-2012 06:56 PM #6
      Quote Originally Posted by miseryindeath View Post
      What to do first? Maintenance. Then worry about go fast bits.

      ECStuning.com sells replacement rockers for like $30-$40.
      This!

      Check your brake pads and rotors, spark plugs wires cap and rotor, check your fluids and replace if needed, air filter, wiper blades, etc.

      Do maintenance first then worry about spending your college money on "mods".

    7. Member 96BlKjEt's Avatar
      Join Date
      Oct 28th, 2004
      Location
      DE
      Posts
      2,590
      Vehicles
      03 GLI 24V + BMP 20th
      02-07-2012 03:57 AM #7
      Goo luck with it I have my first VR and they def will test your patience and wallet but it's well worth it. As people said maintenecd stuff first n then mods. Car looks clean. The switch could have something to do with the sound system?
      Wanna split a bagel?

    8. Member Ed52's Avatar
      Join Date
      May 21st, 2001
      Location
      Toronto, Canada
      Posts
      5,215
      02-07-2012 08:35 AM #8
      Quote Originally Posted by Dutchsider View Post
      If one rocker is rusted out, you likely have a lot more rust elsewhere. I'd pull up the carpet and inspect the floor pans, strut towers and behind your side skirts.
      The truth!!!!

      If it's still good get a thorough oil spray rustproof job - where the oil is actually injected into the enclosed sections.
      1995 Flash Red GTI 2.8 -<< Not Bagged! - only OEM+ >> I will never be cool like the other kids.
      My new dd is a '10 PWagon - not cool either

    9. Member Willey007's Avatar
      Join Date
      Aug 6th, 2004
      Location
      Delaware
      Posts
      3,304
      Vehicles
      1999 VW GLX
      02-07-2012 09:38 AM #9
      I should have the obd 2 port cover laying around. If so its yours!

    10. Junior Member
      Join Date
      Jan 30th, 2012
      Location
      New Bedford, MA
      Posts
      33
      Vehicles
      98 VW GTI
      02-07-2012 10:04 AM #10
      Are you sure the OBDII port cover isn't under the seat or something like that? PO may've dropped it somewhere in the car... it's not something that most people would just lose easily... just a thought.

    11. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-05-2012 11:09 PM #11
      Quote Originally Posted by Sonic303 View Post
      Man, I love black GTis!

      For power you might want to add a metal headgasket from the fourth generation VRs ('99-01.5)
      Cold air intake or leave your stock airbox and get a chip tune and exhaust. That's pretty much it for low budget without going over the top. Lower it, keep it clean and you should be good.
      I KNOW! When I saw this black Mk3 for sale I instantly set up a date to go look at it. They're by far my favorite.
      Actually, I think I read about the metal headgasket fix in a thread a few days ago. I'll have to make note of that.
      As far as the CAI goes, I've heard a lot of people say unless you're willing to put the intake under the fender you're not going to make any real gains and then you have to worry about hydrolocking and such. From what I understand, as long as you keep a clean paper filter in the stock air box, it should do it's job well until you start needing some serious airflow for, say, a turbo.
      Regarding chiptunes, I'm fairly unfamiliar with them... what all does it entail? Is it expensive? What kind of pros and cons are there?
      But yes, I plan to lower it, do some bolt-on mods, sound system, etc. But I still haven't worked out what parts, kits, brands or anything so I need to start figuring out what to buy, who to buy from and where to get it.
      In any case, thanks for the response! I'll be honest, I figured this post would get little to no attention, but I'm glad to see some people took the time to put in a reply!

      Quote Originally Posted by Dutchsider View Post
      If one rocker is rusted out, you likely have a lot more rust elsewhere. I'd pull up the carpet and inspect the floor pans, strut towers and behind your side skirts.
      Believe it or not, my father and I did a pretty good search for rust when we went to look at the car and the only really notable rust spots we found were the passenger rocker panel and up near the top corner of the passenger doorframe where the trim meets the body theres some paint that's bubbling. Beyond that there really isn't much rust. My buddy whos a VW mechanic took a quick look at the car and said it looks pretty solid. I'm not TOO worried but I'm not going to be ignorant and completely write off any and all rust that could possibly be on the car. I'm definitely going to keep an eye out and make sure there isn't any rust anywhere, and if there is... to repair it asap so it doesn't get worse. Thanks for giving me some places to inspect though! I'll definitely check out those locations and keep an eye on them in the future.

      Quote Originally Posted by samiam0295 View Post
      That toggle switch is custom. Thats where the OEM rear window switch went. It might be to turn on an amp or something like that.
      You know, that's probably what it was. The previous owner had a 5 channel amp with a sub in the rear (he took both when he sold the car) so I wouldn't be surprised. My buddy is gonna come over next weekend and we're gonna hook up a 4 channel amp he has lying around in the meantime so I can get my speakers up and running until I can afford my own. While we're working on it I'll check and see if I can figure out where the wires are running.

      Quote Originally Posted by miseryindeath View Post
      What to do first? Maintenance. Then worry about go fast bits.

      ECStuning.com sells replacement rockers for like $30-$40.
      That's what I figured. Repair/replace/maintain whats needed then once it's all good, THEN start upgrading.

      I saw them and figured that would work fine but when I asked my VW friend about it he said they're hard to come by because it's such a common issue that they're in demand and most places are out of stock. =/ Guess it couldn't hurt to see if they actually do have them on hand.

      Quote Originally Posted by thecrackajack View Post
      This!

      Check your brake pads and rotors, spark plugs wires cap and rotor, check your fluids and replace if needed, air filter, wiper blades, etc.

      Do maintenance first then worry about spending your college money on "mods".
      Haha, I guess the rocker panel is definitely a priority then? I figured as much, but you guys just reinforced it for me.
      Front brake pads are pretty good, rears need replacing... I should check spark plugs & wire caps, haven't really gotten that far yet. Rotors could use some work, might do that in the near future but it's not an immediate concern. Fluids are good, but I could use another wiper fluid reservoir cap. If you look in the picture of my engine bay, off to the right side you can see there isn't one on there. I figured if it really needed something on top I could put duct tape overtop or something? Haven't checked the air filter and the wiper blades are okay, but the driver side could use replacing. It hops and squeaks unless theres serious water on the windshield.

      ~~~~~
      TL;DR - Maintenance first, then mods. Gotcha!
      Last edited by Eskimio; 02-05-2012 at 11:24 PM.

    12. 02-05-2012 11:25 PM #12
      Take the maintenance advice seriously, unless you just want to throw money at your car and end up with a blown engine. Do that stuff, then modify.

      Use this as a guide: http://forums.vwvortex.com/showthrea...e-powerful-Vr6.

      Edit: ECS has the rockers in stock. Scroll to the bottom. http://www.ecstuning.com/Volkswagen-...Repair_Panels/
      Last edited by miseryindeath; 02-05-2012 at 11:27 PM.

    13. Member BASKUTKAYZ's Avatar
      Join Date
      Aug 11th, 2007
      Location
      610
      Posts
      196
      Vehicles
      mk3 glx, mk3 trek, mk2 coupe, mk4 golf, mk4 gti, mk2 coupe
      02-05-2012 11:33 PM #13
      Check your accessory belts and look into getting your timing done too. It's a mk3, trust me, if you overlook something it will come back to phuck you.

    14. 02-05-2012 11:43 PM #14
      Quote Originally Posted by thecrackajack View Post
      Check your accessory belts and look into getting your timing done too. It's a mk3, trust me, if you overlook something it will come back to phuck you.
      Accessory belt I can agree with, but they usually last a decently long time. VR's don't have timing belts. They have timing chains. And to make the job easier, the engine and trans should be pulled, since the trans has to come off to do a full timing chain job anyway. Which, while you're in there, the clutch, flywheel, and pressure plate should be replaced to. As I said, a "while you're in there" job since the trans needs to come off anyway. It's possible with the engine in the car, but makes it a complete PITA.

    15. Banned Hurt's Avatar
      Join Date
      May 3rd, 2011
      Location
      Boston, MA
      Posts
      3,846
      Vehicles
      1998 Jetta GT, 1998 GTI 2.0, 2012 GLI, 2012 GTI
      02-20-2012 10:55 AM #15
      Quote Originally Posted by Sonic303 View Post
      Man, I love black GTis!
      What the hell is a "GTi"?
      No, seriously. VW NEVER advertised the GTI as a "GTi". It makes you look stupid, in case you didn't know that.

    16. Member PKstrategy's Avatar
      Join Date
      Oct 21st, 2004
      Location
      SoCal
      Posts
      17,217
      Vehicles
      CC, MK3
      02-20-2012 11:04 AM #16


      OP, car looks to be super clean.
      lower it after all the maintenance is up to spec.

    17. Member
      Join Date
      Jun 13th, 2011
      Location
      Seattle, WA
      Posts
      111
      Vehicles
      1998 Golf GL
      02-20-2012 11:58 AM #17
      Dont forget to pick up an mk4 cabin filter and install it. Only takes a few minutes and was easily the best mod I have ever done for the time and money.

    18. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-20-2012 06:11 PM #18
      Quote Originally Posted by Hurt View Post
      What the hell is a "GTi"?
      No, seriously. VW NEVER advertised the GTI as a "GTi". It makes you look stupid, in case you didn't know that.
      Woah, woah, WOAH! Chill out bro, it's all good. GTI, GTi, Gti, gti, gtI, gTI, GtI, gTi... it's all the same. What's important is that he appreciates the car for what it is.

      Quote Originally Posted by PKstrategy View Post


      OP, car looks to be super clean.
      lower it after all the maintenance is up to spec.
      Thanks! Appreciate the kind words. Been following your build threads for the cabrio and the gti, avid follower - I check every night. By the way, you're the one who made me fall in love with gunmetal D90s.

      Quote Originally Posted by proofpudding View Post
      Dont forget to pick up an mk4 cabin filter and install it. Only takes a few minutes and was easily the best mod I have ever done for the time and money.
      An mk4 cabin filter? For the in-car climate control? (i.e. AC/Heat) How is it different from Mk3 OEM? I'll have to look into it if you make it sound that great.

      ~~~

      On another note... I went to my first cruise & gtg yesterday! Had a BLAST and took a TON of pictures!

      Slideshow here: http://goo.gl/sQVyr

      I had a ton of fun driving there and back and I met some great guys and got to have a few beers and such. Much fun was had. Can't wait for the next meet, I'm already itching for another cruise.
      DELDUBS

      [Das Borgen] VR6s should sound like Chewbacca getting raped.
      [root beer] I'm still not used to 4 cylinders. The vr was just BAAAAAAAAAAAAH all the time. This is wwwwwwwaaaaaaAAAAAAAAAAHHHHHHHHHHHHH!

    19. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-22-2012 10:30 AM #19
      Quote Originally Posted by proofpudding View Post
      Dont forget to pick up an mk4 cabin filter and install it. Only takes a few minutes and was easily the best mod I have ever done for the time and money.
      Quote Originally Posted by Ed52 View Post
      The mk4 cabin filter will not fit the mk3 screen. I used a piece of home gas furnace air filter, cut it larger than the screen and used the metal re-inforcing grid to form around the screen. (located in the pass side cowl area under wiper.) While you're in there clean out the accumulated leaves in the entire cowl area, lube the wiper linkage and check for rust.

      Speaking of rust...pull out the rubber surround of the gas filler area and clean out 3 1/2 lbs of dirt and spray rustproofing to it.
      Hmm... I'll have to look into that. Just as you said Ed52, right after I bought the car I went over it thoroughly to find anything I might have missed upon initial inspection and I found a cluster**** of mouse nesting in the filter housing cowl area. I'm sure it's fairly screwed up and could definitely use replacement so this could be a viable mod.

      Thanks to Willey007 I got my hands on these photos:







      Which lead me to believe it very much is possible to install an mk4 filter in the mk3 spot... but I'll have to do more research first.

      Also, I'll take a look at the fuel filter area. Thanks for the tips proofpudding & Ed52!

      Edit: A quick search unearthed this ebay listing for an mk4 cabin filter housing

      Edit 2: I also found this vwvortex.com mk3 -> mk4 DIY housing install thread so if/when I have the money I may take this route because that filter looks much more robust. Not to mention mine could use replacing anyway.
      DELDUBS

      [Das Borgen] VR6s should sound like Chewbacca getting raped.
      [root beer] I'm still not used to 4 cylinders. The vr was just BAAAAAAAAAAAAH all the time. This is wwwwwwwaaaaaaAAAAAAAAAAHHHHHHHHHHHHH!

    20. Member
      Join Date
      Oct 13th, 2010
      Location
      CT
      Posts
      106
      Vehicles
      B5 A4 2.8 Q
      03-15-2012 03:12 PM #20
      Quote Originally Posted by PKstrategy View Post


      OP, car looks to be super clean.
      lower it after all the maintenance is up to spec.
      almost got me caught out for LOLing at work!

    21. Member Ed52's Avatar
      Join Date
      May 21st, 2001
      Location
      Toronto, Canada
      Posts
      5,215
      03-15-2012 05:38 PM #21
      The price is not too crazy. Having done this to a Mk3 Jetta I can say it's no fun to hacksaw pipe while lying on your back under a car and fighting with rusty clamp bolts.

      You should have run your car while the pipe was off...now that's Vr sound.
      1995 Flash Red GTI 2.8 -<< Not Bagged! - only OEM+ >> I will never be cool like the other kids.
      My new dd is a '10 PWagon - not cool either

    22. Member Danny P.'s Avatar
      Join Date
      Jul 29th, 2009
      Location
      Elizabeth, NJ
      Posts
      1,514
      Vehicles
      96 Jetta 2.0, VR6 with no home.
      02-06-2012 12:43 AM #22
      Spark plugs, spark plug wires, fuel filter, check your coil pack for cracks. If its cracked you can epoxy it till you have enough money to replace it. Engine oil and gear oil change. Check for coolant and oil leaks. Timing chains, clutch and fly wheel, bushings all around. That's all I can think of for maint. For performance, chip( I like the c2 motorsports chip its a bit pricey $200 but worth it), exhaust, and intake to start. Then you can go with cams and the mk4 head gasket. There is alot of info on pretty much anything to make your vr go fast on here. Check out the mk3 FAQ thread and shop around. 3 websites I always order from are www.germanautoparts.com , www.ecstuning.com , and www.mjmautohaus.com. I've never had any problems ordering from them. Good luck hope to see some progress on this. Black mk3's are money.


      Sent from your Mom's house using your Dad's IPhone.

    23. Member granny1986's Avatar
      Join Date
      Apr 5th, 2007
      Location
      CHICAGO
      Posts
      408
      Vehicles
      '81 Rabbit Pickup Diesel
      02-06-2012 08:40 AM #23
      Look into a "Jetex" exhaust ... lasts a lifetime I have the same car and I put it in mine

    24. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-06-2012 09:14 AM #24
      Quote Originally Posted by VwCollector View Post
      Ya the fender pulls are legit on mk4 not quite the same on mk3, I still got stock leather wheel myself, my mk2 Jetta has the momo steering wheel, if you dont want much louder exhaust id say hollow it out or take it off and make it straight right there, I have a 5zigen exhaust from the cat back and is not to loud I love it. And cheers to all young bucks for sure bc vw is the way to go
      Yea, mk4 fender pulls are so sexy... You have an mk3 & and mk2? Nice! I'm jealous. =P I had a chance to buy an mk2 w/ a brand new 2.0L swap with 5k miles on the engine as well as brand new brakes and such... but the car was a little rough around the edges and I needed it to survive the semester. I got a warranty with my mk3 so I shouldn't have to worry about much, if anything, for the next 3 months! :
      As for exhaust, I don't plan to replace the entire system for a while, if at all. I like the sound of muffler-deleted VRs. I rode in a muffler/resonator-deleted mk4 when looking for a car and it was loud as HECK so I decided not to go that route. But yea young bucks unite!

      Quote Originally Posted by sweetrocco420 View Post
      CLick on the FAQ on the top of the page or search rootbeers how to build a relitivly inexpensive vr... a lot of good info in there welcome and be careful to many young kids jump into a vr and hurt themselves or others. timing chains around pa usually go for about 1800... shop wise do it yourself your looking at 600 roughly with a new clutch its not bad at all just do your research buy yourself a bently and your good to go!
      Word! I'll have to check that out!
      Now, I understand your warning about getting hurt... but I've been around the block with a few kinds of vehicles. The first vehicle I drove regularly was a '98 Dodge Dakota 2x4 V8 Magnum w/ a posi-rear & supercharger. That was too much for a first car, I got in some close calls driving that thing. My next car, and the first car I owned personally was a '94 Ford Ranger w/ a 2.3L turbo swap from an '88 Ford Thunderbird. That thing was a project car, lemon and moneysink all in one. I ended up having to sell it so I could buy my next car... a '00 Chevy Cavalier. That thing was reliable and got great gas mileage but had no power and was uncomfortable as all get-out. Gave that to my sister and bought my next car off my dad. A '92 Ford Mustang 5.0L w/ cam, CAI & exhaust. That was a beautiful car... until someone ran me off the road and I totalled it. Which brings me to present day, looking for a reliable car in my price range that can also be a fun car to drive, great on mileage and on top of all that - there's a HUGE following and an enormous scene that I'm dying to get into. All-around best car decision ever.
      Anyway, timing chains... I'll have to look into it. I've got some VW buddy mechanics and multiple shops at my disposal plus my dad can get OEM parts at cost so I'm sure I could work something out.

      Quote Originally Posted by granny1986 View Post
      Look into a "Jetex" exhaust ... lasts a lifetime I have the same car and I put it in mine
      I've heard of the Jetex exhaust but I haven't seen pricing/looks/sound yet, I need to do that. How do you like yours? Hows the exhaust note? Power gains? Etc?

    25. Member granny1986's Avatar
      Join Date
      Apr 5th, 2007
      Location
      CHICAGO
      Posts
      408
      Vehicles
      '81 Rabbit Pickup Diesel
      02-06-2012 09:25 AM #25
      I think I paid around $500. Sound is excellent, deep, and yet probably the quietest available. Slight increase in performance. I think it's an inch or a half inch larger diameter than stock. I'm not really into performance type stuff myself... so I don't know much more than that

    26. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-06-2012 11:08 AM #26
      Quote Originally Posted by granny1986 View Post
      I think I paid around $500. Sound is excellent, deep, and yet probably the quietest available. Slight increase in performance. I think it's an inch or a half inch larger diameter than stock. I'm not really into performance type stuff myself... so I don't know much more than that
      Hmm... that's not bad. I like way you described the exhaust note, it sounds appealing. As for the diameter, I HIGHLY doubt that it's 4" in diameter... lol. From what I've read, these engines do perfectly fine on 2 1/2" di. but some people to bump it up to 2 3/4". I think I read there's only one manufacturer of exhaust systems that produces a 3" diameter exhaust, but that's as big as they go. I think for now I'll delete the suitcase and either leave it straight pipe or put a high-flow muffler like a magnaflow, flowmaster, borla, or something to that effect.

    27. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-06-2012 04:31 PM #27
      On a somewhat related note, rolled into the parking lot at college today (classes started today) and the first parking spot I came across was right next to a black mk3 jetta. As I parked and got out, so did the driver of the Jetta. Lo and behold we started chatting about our cars and the next thing I know, I've got his name and number. I ****ing love my car.

    28. Junior Member KiiNgLiiNdO's Avatar
      Join Date
      Jan 9th, 2012
      Location
      Jamaica Queens
      Posts
      92
      Vehicles
      97 MKIII Jetta GT VR6
      02-06-2012 05:04 PM #28
      coilovers.. brakes.. intake.. full exhaust
      MR. MK III

      HOT CHIX DIG ME

    29. Member LG6R's Avatar
      Join Date
      Oct 20th, 2003
      Posts
      16,892
      Vehicles
      purple girl's car
      02-06-2012 07:50 PM #29
      New guy of the year. He's down to earth, doesn't ask dumb questions, seems to know enough but is always looking to learn more, knows how to search and uses full sentences in English. This is amazing! Welcome. Your car looks like a nice example of a clean mk3.

    30. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-06-2012 08:12 PM #30
      Quote Originally Posted by KiiNgLiiNdO View Post
      coilovers.. brakes.. intake.. full exhaust
      Check... check... check... check... all added to my "must learn more" list. Trust me, that text file is HUGE by this point, and growing bigger by the day.

      Quote Originally Posted by LG6R View Post
      New guy of the year. He's down to earth, doesn't ask dumb questions, seems to know enough but is always looking to learn more, knows how to search and uses full sentences in English. This is amazing! Welcome. Your car looks like a nice example of a clean mk3.
      You honor me sir! When I saw your post I was instantly flattered without even reading it's contents. Believe it or not, I spent a good 3-4 hours last night going through your road trip threads because they were so full of fantastic photographs and gorgeous landscapes. It even motivated me to go on a hike today! (Took the mk3 to the local state park! Haha! ) Your jetta is my roll model, seriously. An all-in-one car that you can literally live out of, yet still have it looking sexy enough to get some rubbernecks.
      Seriously though, I really appreciate the compliment. I'm always willing to learn more and I've been trying desperately to get into the scene. I have a buddy who lives in Carlisle, PA who has a red mk3 Jetta which he just put aside and replaced it with another mk3 jetta (black, wolfsburg edition) that has a fraction of the mileage. I have two other buddies who I just met through a coworker (Mike & Eric @ Eurowerks in Clifton Heights, PA) and now I have my new friend from college who I met this morning. On top of all that, my father's best friend has a mk4 passat with aftermarket suspension, steering, brakes, rims and he's ready to supercharge the beast. I'm SO attending shows and events this year... they just can't come soon enough. Anyway, as I've started driving the car I've started noticing smaller idiosyncrasies and other little things that may need fixing/repairing in the future. I knew what I was getting into, I've been lectured on VW pros and cons by at least 5 people at this point (and read twice as many threads on vwvortex) so I'm sure I'll take each bump in the road like a champ.

      On a side note: Does anyone know where I can find a replacement cover for the OBDII diagnostic port? I did a preliminary search but didn't turn up much because any results are either too broad and flooded with people whose cars are throwing out codes or too narrow and I get results that don't answer my question. I'm sure I could get one from a dealer for $5-10 or something like that but I figured it couldn't hurt to throw my feelers out there.
      Last edited by Eskimio; 02-06-2012 at 08:19 PM.

    31. 02-06-2012 09:02 PM #31
      Those covers can be found at dealerships, junk yards or on ebay. I happen to be lucky and met a guy today that has over 30 vw in his yard, he is a hot rod builder and fell in love with vw and started collecting them. I hear he has a few corrados several gti from all years and lots of jettas to. So I am gonna start hitting him up for parts and soon buy one of the corrados

    32. Member Eskimio's Avatar
      Join Date
      Jan 12th, 2012
      Location
      DelaWHERE?
      Posts
      739
      Vehicles
      1998 VW GTI VR6
      02-06-2012 11:49 PM #32
      Quote Originally Posted by VwCollector View Post
      Those covers can be found at dealerships, junk yards or on ebay. I happen to be lucky and met a guy today that has over 30 vw in his yard, he is a hot rod builder and fell in love with vw and started collecting them. I hear he has a few corrados several gti from all years and lots of jettas to. So I am gonna start hitting him up for parts and soon buy one of the corrados
      Haha word, very nice. I'll have to give my local dealer/junk yard a call and see whats to be seen.

    33. Member Ickey's Avatar
      Join Date
      Sep 6th, 2009
      Location
      Richmond IN
      Posts
      2,569
      Vehicles
      97 Jetta VR
      05-28-2012 10:35 AM #33
      Yea I am gonna be doing this too before long oh should be fun ...

      Sent from my PG86100 using Tapatalk 2

    34. Junior Member MikexH's Avatar
      Join Date
      May 23rd, 2012
      Location
      Cincinnati, OH
      Posts
      94
      Vehicles
      MKIV Jetta GLS 1.8T/MKIV Golf GLS
      05-28-2012 11:44 AM #34
      I'm looking at the exact same car. Same color and everything. So this thread is awesome. Nice ride, too!

    35. Member Willey007's Avatar
      Join Date
      Aug 6th, 2004
      Location
      Delaware
      Posts
      3,304
      Vehicles
      1999 VW GLX
      05-28-2012 12:27 PM #35
      Cheers! It was a good time. Glad its done and running the streets again.
      MK<3

      IG: @willey007 #vento007

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •