I'll play
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
![]()
#1
I wanna see all the sickest black magic pearl glis and 20ths
So post away get crazy![]()
GLI
#3
Finally a BMP thread.
My new wheels go on march 3rd.
I'll be posting pics then!
R135
╚╬╬╣
_246_
#8
#11
"Yeah, I pissed myself, but that's only because I only had 20 minutes for recess." Duane Peters
#13
not exactly a 20 but still sexy IMO...Although i guess I am a little bias considering its mine lol
#16
Dont be alarmed at the fact it was purchased this way. You know why it was painted? The p.o. mother was diagnosed with breast cancer. See there is a reason behind it. The headlights no longer exist on this car. There are no more stickers on the hood or windshield.
Funny thing is, I am going to be raising it up and running stock sized 225/40 tires. Screw low and slow. I actually drive my cars.
#18
I really need some new updated pics...this is from when I got the car. Headlights are now e-codes and I've painted the front bumper to get rid of the rock chips.
![]()
#21
#22
What's Al doing the tuning on? I wish my rifle would be done by then, I'd love to bring it out for you guys. Porsche brakes huh? I have some myself. My .02 is to be sure of your offsets on the wheels. My Raderwerks cleared the GLI brakes no problem and so did my RC's, but the Porsche calipers made it so I needed a minimum of a 5mm spacer on the both sets of wheels. Final et on the Raderwerks was 18x8.5 et21 and the RC's became 18x7.5 et29. Just an FYI.
More car pron. Cell phone camera FTW!!
![]()
#23
I actually did it myself with spray touch-up paint. Perfect match. I taped off parts of the bumper but it looks fine. Its not quite as shiny, but the bump strip is a bit matte as well and the lower lip was painted with bedliner by the PO () so it doesn't stand out. The can of clear got me 2 or 3 coats only...a few more would have made me happy but I don't have crazy grey spots anymore, which is what I wanted.
#26
You should be able to tuck the sh^t out of a wheel with 8.5 et30. My Raderwerks are still capable of going into the wheel well at et21. No fender liner though. Speaking of fender liner, what are you using to protect your fenders from the possiblity of a rock being tossed up there?
![]()
#27
I've got nothing protectingAs of now you can barely put a piece of paper between tire and bag and tire and fender. I guess my measurements were right
Oh and I think it might be Todds car Al is tuning. Can't seem to get the thing to stop trimming. I had the same issue with Eurodyne that's why I switched to Untitronic
[IMG][/IMG]
Waffled
#28
GLI
#32
Anyone know where to get this paint? Planning on doing some body work and re spraying my car this summer.
I pee on the side of the toilet to make less noise. I<3( . Y . )'s
#33
I got spray touch-up from the dealer. They may know of a good place to get it in larger quantities. Otherwise, paintscratch maybe?
#35
20th No. 2766 pics coming soon! Still not quite worthy of posting anywhere close to these other bmp's! Their looking damned good guys! Keep em coming! Hopefully I'll be ready to whore mine out a lil in the next month or 2.