Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Results 1 to 13 of 13

    Thread: WTB: 15" meshies

    1. 03-02-2012 11:45 AM #1
      Newbie here.

      Looking for a set of 15x7 (or 7.5 or 8) mesh wheels with a PCD of 4x108. Would prefer a bit of dish to them and backspace needs to be less than 4.5" so I don't have to run spacers.

      All brands/models considered except for Enkei 92s, will even entertain 14", though I prefer 15".

      Really like Compomotive CX300s, SSR mesh, Enkei EK98s, etc.

      What have you got? Pics/price required!

      Thanks,

      Dan
      Elk River, MN 55330

    2. 03-03-2012 08:44 PM #2
      bump

    3. 03-06-2012 10:42 AM #3
      anybody?

    4. 03-11-2012 11:40 PM #4
      125 views and NOBODY has a set of 14" or 15" mesh wheels to sell?

      Somebody's hoarding!

    5. 03-17-2012 11:32 PM #5
      Still looking!

    6. 03-18-2012 03:40 PM #6
      I have a set of mesh Enkei 16x7's I have 5 of them and aluminum hub rings to mate the wheels to a 57.1 centerbore. Price is $600 and is firm. Four of them are perfect and one has a small chip in the lip. One of the good wheels is spray bombed a bronze color. All come with center-caps. Pics are here.
      Bronze wheel:

      16x7 et23:

      Mounted on my CQ:


      Let me know. I'm located in NJ 08361.

    7. 04-05-2012 12:12 PM #7
      Beautiful wheels, Nash20thAE, but I'm gonna pass. Not sure my project, a 1976 Capri II, will look right with 16" wheels and rubber bands for tires.

      Still looking!

    8. Member mopman93's Avatar
      Join Date
      Apr 6th, 2010
      Location
      CT
      Posts
      171
      Vehicles
      86' Xr4ti, 71' Capri
      04-10-2012 05:36 PM #8
      I have what you're looking for but they are 4x100. Considered redrilling the hubs?
      Quote Originally Posted by Jrod511 View Post
      Understeer....dun-na-DUH-NA.....ROCK YOU LIKE A HURRICANE
      http://www.scr2002.com

    9. 04-11-2012 10:13 AM #9
      not sure if this interests you, but a have 3 Enkei EK98's 15x7 +19 offset. I just bought them and was planning on cleaning and refinishing them to resell. All 3 are dirty and have some paint peeling on center sections (gold) but are in good shape otherwise and will clean up very nicely! If you have any interest, let me know and we can discuss price.

    10. 04-17-2012 12:52 PM #10
      Sorry folks, been away from my computer for awhile.

      Mopman93 - you've peaked my curiousity. What have you got? Re-drilling would add to my overall cost, but...

      wide opn - one concern I have would be how difficult it might be to find a fourth wheel. I could find one the next day or be on the hunt for years!

      Dan

    11. 04-17-2012 02:01 PM #11
      Quote Originally Posted by capri2mn View Post
      Sorry folks, been away from my computer for awhile.

      Mopman93 - you've peaked my curiousity. What have you got? Re-drilling would add to my overall cost, but...

      wide opn - one concern I have would be how difficult it might be to find a fourth wheel. I could find one the next day or be on the hunt for years!

      Dan
      Thats a fair concern Dan! I had the exact same concern myself. I would sell them for a good price, leaving you far ahead of the game if and when you do find a 4th. If you want to discuss further, just let me know. thanks

    12. 04-28-2012 09:49 PM #12
      Ok everyone,

      After much looking, I have narrowed my choices to just 2:

      Enkei Apache V (first choice) or Enkei Apache IV (second choice)

      At this point, I realize that I may not be able to be so choosy on size, so let me know what you have. I still would prefer 4x108 with a minimum 4" backspace, but am open to the options of re-drilling, using spacers/adapters, and even rim size. I'm not even sure what sizes these models were available in!

      Thanks,

      Dan

    13. 05-07-2012 09:40 PM #13
      I'm almost ready to give up! Doesn't seem to be anything out there.

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •