Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    VWVortex


    Page 1 of 5 12345 LastLast
    Results 1 to 35 of 143

    Thread: 2.5L Billet Valve Covers In Stock And On Sale

    1. 03-02-2012 12:54 PM #1
      Update Now available in Black Anodized and Red Anodized finishes. These are a new bright dip ano and the color looks amazing! The anodized ones run $439.00

      Only $389.00 Buy Here! Also you can add a threaded fitting with a breather filter for an additional $49.99

      With the help of Integrated Engineering, we are proud to offer billet valve covers for the
      MKV VW 2.5L 5 cylinder 20V engines. These beautifully finished pieces start
      off as one large piece of 6061 aircraft aluminum, and are precisely
      machined on our in-house CNC mill. They are a direct replacement for
      your factory valve cover, and use the OEM gasket. They have a single
      -10an outlet for a custom breather setup. To ensure that no oil comes
      out of the breather, these have welded baffles that are guaranteed to
      not fail.
      Whether you are looking for custom look, or an easy way to
      start off a custom catch can project, these billet 2.5L valve covers are
      a great addition to your engine bay!

      It is recommended to use a new OEM valve cover gasket for installation of the billet valve cover.
























    2. Member tay272's Avatar
      Join Date
      Aug 22nd, 2007
      Location
      Zionsville, PA
      Posts
      2,121
      Vehicles
      06 Sage Green Rabbit | 03 Passat V6 4-Motion sedan
      03-02-2012 03:57 PM #2
      So instead of running a catch can you can just put that breather filter in and everything will be all gravy? Sounds pretty sweet to me, deffinately buyin one of these when I get the cash.
      http://s529.photobucket.com/albums/d...abbit%20build/
      2006 Sage Green Rabbit 5spd| UM SRI | UM 93 SRI tune | NLS Cai | Custom exhaust | USP testpipe | ECS crank pulley | BSH mounts |034 Dogbone core| NLS SS w/42DD bushings | GTI brake swap | Koni yellows w/H&R race springs | GTI rear sway |

    3. Member eatrach's Avatar
      Join Date
      May 13th, 2004
      Posts
      927
      Vehicles
      '09 VW Jetta 2.5L auto
      03-02-2012 04:40 PM #3
      Gabe, that is one clean looking piece

    4. Member pennsydubbin's Avatar
      Join Date
      Mar 3rd, 2010
      Location
      Pa
      Posts
      1,145
      Vehicles
      2005.5/08 Jetta 2.5T
      03-02-2012 05:13 PM #4
      i can't wait to buy one
      United Motorsports 2.5T

    5. Member TylerO28's Avatar
      Join Date
      Jul 7th, 2008
      Location
      Mill Creek, WA
      Posts
      3,660
      Vehicles
      '08 2.5Turbo Rabbit
      03-02-2012 10:26 PM #5
      Well i'm going to have to bite the bullet and order one I think... Cleans up the bay and looks a million times better than crap plastic. Order is being placed shortly
      god i love my car. it may not be fast, but it's crazy fun!



      C2 stage 2 TURBO!!! ACHTUNG!!! 2.5liter 5cylinder contents under pressure!!!


    6. Member nunumkv's Avatar
      Join Date
      Jul 5th, 2010
      Location
      Tampa, Florida
      Posts
      1,414
      Vehicles
      2005 MKV Jetta 2.5L, 2012 GLI
      03-09-2012 09:45 PM #7
      nice wish this was out before I got my eurojet
      UroTuning
      GulfCoast€urosTampa's Home for Euro Enthusiasts!

    7. Member TylerO28's Avatar
      Join Date
      Jul 7th, 2008
      Location
      Mill Creek, WA
      Posts
      3,660
      Vehicles
      '08 2.5Turbo Rabbit
      03-09-2012 09:47 PM #8
      Quote Originally Posted by nunumkv View Post
      nice wish this was out before I got my eurojet
      First is not always best! Glad they sold out when I tried to buy one of theirs
      god i love my car. it may not be fast, but it's crazy fun!



      C2 stage 2 TURBO!!! ACHTUNG!!! 2.5liter 5cylinder contents under pressure!!!

    8. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      03-12-2012 10:00 AM #9
      Awesome! Now a few questions...

      Any install guide available so I can check how easy it is?
      Compatible with MKVI (2011+)?


      Appreciated!

    9. Member itskohler's Avatar
      Join Date
      Jan 7th, 2011
      Location
      Jacksonville, FL/Dallas, TX
      Posts
      4,434
      Vehicles
      2012 Jetta, 2008 Jetta RIP
      03-12-2012 11:10 AM #10
      Quote Originally Posted by SimpleStaple View Post
      Awesome! Now a few questions...

      Any install guide available so I can check how easy it is?
      Compatible with MKVI (2011+)?


      Appreciated!
      Relatively easy. If you can change your air filter you can change the VC. Just make sure you keep the area clean when its off and buy new gaskets.

    10. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      03-12-2012 11:23 AM #11
      Quote Originally Posted by itskohler View Post
      Relatively easy. If you can change your air filter you can change the VC. Just make sure you keep the area clean when its off and buy new gaskets.
      Eggcellent... but is there a installation PDF thingy for it?

    11. 03-12-2012 11:33 AM #12
      Although there site is down at the time of this post, here is a nice article on install.

    12. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      03-12-2012 11:41 AM #13
      Quote Originally Posted by gabe@bwperformance View Post
      Although there site is down at the time of this post, here is a nice article on install.
      Lookin' good! Thanks!

      Sucks their site is down, though... Gonna place my order through USRT in the next few days!




    13. Member redrbt2.5's Avatar
      Join Date
      May 11th, 2009
      Location
      CT
      Posts
      570
      Vehicles
      '91 16v GTI, '90 Cabriolet (rip)
      03-20-2012 01:32 PM #16
      any issues with having that oily film in the engine bay with only that filter installed?

    14. 03-21-2012 01:58 PM #17
      Been running one for a bit on a turbo Rabbit with no oily issues at all.

    15. Member TylerO28's Avatar
      Join Date
      Jul 7th, 2008
      Location
      Mill Creek, WA
      Posts
      3,660
      Vehicles
      '08 2.5Turbo Rabbit
      03-22-2012 06:08 PM #18
      this is up on my list of MUST HAVES!!!
      god i love my car. it may not be fast, but it's crazy fun!



      C2 stage 2 TURBO!!! ACHTUNG!!! 2.5liter 5cylinder contents under pressure!!!

    16. Member dhenry's Avatar
      Join Date
      Feb 9th, 2009
      Location
      Va Beach
      Posts
      2,670
      Vehicles
      mkv
      03-22-2012 08:35 PM #19
      just ordered cant wait for it to get here and install
      question: what kind of plug will i need to block the PCV port on my UM SRI
      follow me @dominickhenry | 2.5l UM tuned! | SCCA Solo FSP class |Flickr | Build Thread | FS Benz wheels

    17. 03-22-2012 10:29 PM #20
      off the top of my head I believe it is a 3/8 NPT thread plug

    18. 03-22-2012 10:46 PM #21
      Is it possible to get the Valve Cover without the engraving? (BW Performance by Integrated Engineering)

    19. 03-24-2012 01:43 AM #22
      Sorry but all of the covers are engraved. Shoot me an email though and maybe on the next run we can get you one.


      Sent from my Race Car

    20. 03-24-2012 08:09 AM #23
      No worries. I was mainly concerned about powder coating it and not being able to make out the engraving.

    21. Banner Advertiser pete@integrated's Avatar
      Join Date
      Jan 1st, 2009
      Location
      Salt Lake City, UT
      Posts
      3,205
      Vehicles
      '92 Gti 20v, '96 M3, '10 Shop Van :)
      03-24-2012 11:14 AM #24
      If you give it a light sanding right there before powder, it will be as if it was never there. It's only engraved about .003" deep, and powder will easily fill it.
      .:IntEngineering.com:. .:Facebook:.

      Check out some cutting edge R&D Work on our blog! IE Behind the scenes Blog!

    22. 03-24-2012 12:19 PM #25
      Sounds good, thanks.

    23. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      03-30-2012 10:06 AM #26
      Can't wait for mine to get in!

    24. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      04-03-2012 10:52 AM #27
      BUMP for this!

      Mine is arriving today!!!!!


    25. Member
      Join Date
      Sep 30th, 2009
      Location
      Guelph, ONT \ Daytona Beach, FL
      Posts
      908
      Vehicles
      06 Jetta 2.5L 5spd (LSD+ .717 TDI 5th swap)
      04-03-2012 01:13 PM #28
      My fav part:

      To ensure that no oil comes
      out of the breather, these have welded
      baffles that are guaranteed to
      not fail
      Haha!

      But i really want one and for that price WOW!!!
      C2 tune, Peloquin LSD, .717 TDI 5TH gear swap, AWE exhaust, BSH CAI, H&R street sport coilover + 25mm RSB, neuspeed short shifter, 17x8 BBS RGR.

    26. Banned SimpleStaple's Avatar
      Join Date
      Sep 15th, 2011
      Location
      Villanova, PA
      Posts
      1,919
      Vehicles
      Jetta VI 2.5L
      04-04-2012 03:47 PM #29
      So I have my Valve Cover and what not.... Any catch cans that are known to be compatible/recommended?

    27. Member dhenry's Avatar
      Join Date
      Feb 9th, 2009
      Location
      Va Beach
      Posts
      2,670
      Vehicles
      mkv
      04-04-2012 09:59 PM #30
      Quote Originally Posted by SimpleStaple View Post
      So I have my Valve Cover and what not.... Any catch cans that are known to be compatible/recommended?
      eurojet,42 draft designs, BFI....

      or you could just vent to the atmosphere
      follow me @dominickhenry | 2.5l UM tuned! | SCCA Solo FSP class |Flickr | Build Thread | FS Benz wheels

    28. Junior Member
      Join Date
      Mar 3rd, 2009
      Location
      NY
      Posts
      54
      Vehicles
      2008 Rabbit
      04-04-2012 10:33 PM #31
      I really want one of these, but just want to confirm that with the add-on filter a catch can is not *needed*.

      I'd prefer to not have an oily mess in the engine bay.. and this would look sexy next to the SRI i have on order

      From all appearances this looks like a both cosmetic and functional addition to the SRI over a catch can or downdraft tube.
      '08 Rabbit- P-Flo, Torque Insert, C2 SRI+Tune, USP DP w/HF Cat, Lightweight Flywheel, BFI Engine&Trans Stage 1 Mounts

    29. Member dhenry's Avatar
      Join Date
      Feb 9th, 2009
      Location
      Va Beach
      Posts
      2,670
      Vehicles
      mkv
      04-04-2012 11:25 PM #32
      Quote Originally Posted by Zaytri View Post
      I really want one of these, but just want to confirm that with the add-on filter a catch can is not *needed*.

      I'd prefer to not have an oily mess in the engine bay.. and this would look sexy next to the SRI i have on order

      From all appearances this looks like a both cosmetic and functional addition to the SRI over a catch can or downdraft tube.
      i received mine last week and installed it with the add on filter. it was alot bigger than i expected. but the baffle works great and no oil film or residue is noticeable


      *ignore the mount to the side
      follow me @dominickhenry | 2.5l UM tuned! | SCCA Solo FSP class |Flickr | Build Thread | FS Benz wheels

    30. 04-05-2012 12:19 AM #33

    31. Member chadone's Avatar
      Join Date
      Apr 26th, 2010
      Location
      Buffalo NY
      Posts
      1,385
      Vehicles
      2007 VW Golf
      04-09-2012 09:54 AM #34
      I sent u guys an email today.
      Is it possible also to run a smaller filter instead of the large one seen above? I saw a few on eBay that were a size 12mm and they were green instead of red. Ordering kit soon
      2007 Bagged and Shaved MK5 Golf. -Daily Dirt-

    32. Member kevin splits's Avatar
      Join Date
      Aug 23rd, 2010
      Posts
      18,364
      Vehicles
      01001011010011110 1010010
      04-09-2012 11:09 AM #35
      Quote Originally Posted by chadone View Post
      I sent u guys an email today.
      Is it possible also to run a smaller filter instead of the large one seen above? I saw a few on eBay that were a size 12mm and they were green instead of red. Ordering kit soon
      I'm soo lost on how us with catch cans empty them with oil, gas, water in them and these magical valve covers can run a breather and not create a mess in the bay... For example I had to throw away the filter to my catch can because it created a film all over the bottom of the hood.

      Also is that a 10 an, or is that a npt thread to accept a npt to -10an fitting?

      If I can seriously run this valve cover with just a filter with no mess I'll buy one... It's just if there is no can to catch the waste/blowby where is it going if its not coming out of the filter creating a mess? That's the question I've yet to see asked or addressed, and ultimately keeping me from biting the bullet if you will..
      "The Vile Bunch" ll v2lab ll eemilitiatv ll Stay Orange.
      2008 Mkv sold; 2003 yellow Skittle-sold; 2009 G8 GT-sold; 1991 Talon TSI- fully built, HTA3582@30psi 600+awhp

    Page 1 of 5 12345 LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •