G60 into MK2 - Wiring headache - please help

[eljw24]

Hey y'all.
I'm normally in the mk4/1.8t forums but a friend of mine needs some help with a project car he bought.
It's a MK2 with a g60 swap, almost done except for the wiring.


I've seen the relay and fusebox diagrams - wiring is definitely not my forte.
Where do the two plugs (7 wires) nearest the ECU plug go?
What is T3b, T1g, T3g?
The relay diagrams I've seen show the fuel pump relay but don't show which is input or output.
Do the two FP relay output wires splice into the same wire?
ECU relay input/output?

Its all very confusing

Could someone make a diagram showing which relay wires to tap into?
Here's some digital bewbs for your trouble.
( . Y . )

[bonesaw]

there is a subharness from a G60 that you need. Otherwise bust out the bentley and learn to read wiring diagrams.

[SkootySkoo]

The two plugs closest to the ecu plug are basically what runs to the fuse box. T3g would be your fuel pump relay while t3g is your ecu relay. On a g60 these would be in the wiper cowl and run down into the cabin an attach at the fuse box.