I have the whole set of wood for MKV 4 doors. One person stated it was 'ruined' because I had the wood separated initially. It isn't ruined because it slides off and on as you can see in the pics on post #13. I have sacrificed my own ashtray because I think it was the original one the wood came on. It opens and closes perfectly. The wood is in very good condition. I am redoing this 1st post to clean this thread up a bit. I had originally forgotten I had a whole set. With that, I am selling it for $70 shipped. That includes the ashtray (smokeless ashtray I believe is what this is called - no actually place for ashes but instead a cubby hole and the 12v plug in). Three pieces across the dash, then 4 pieces for doors (one for each obviously). Here are the pics!
Last edited by billecorgan; 04-02-2012 at 10:05 PM.
Reason: Clean up thread
I just figured out that I had all of the set (of door pieces), then I realized that there is the dash pieces. I have those also and will sell them. I will sell all including dash pieces for $60 shipped. What I would like to do is have a separate core charge (like $30, I guess) and so I would get $90 from the person who is buying and then when I get their wood, I would send $30 back. I have did this with other parts for another person. Please give me some feedback (anyone..) of if that sounds fair. I will go take some pics of the dash pieces.
EDIT: UPDATED PRICING
Last edited by billecorgan; 04-02-2012 at 04:05 AM.
The ashtray has been re-assembled so I am wanting $70. I would need to do a core charge situation since I don't have any pieces for my own dash. So, lets do $100 and I will refund $30 upon receipt of any pieces for the dash. I'm going to cover them with this vinyl so they can look like sh*t for all I care, as long as they will stick into the holes and hold some vinyl.
Last edited by billecorgan; 04-02-2012 at 10:06 PM.
Just to show that the ashtray is not 'ruined.' Here are some pics of the ashtrays and the wood separated. Even my cheap black ashtray (basic one I'm sure) is able to be separated. I was able to mount the wood on it but it didn't quite open right so I mounted the wood back on the original ashtray.
Notice the holes where the tab pieces can slide into. I left the right side open so you could see the holes without my circles.
Here is the bottom of the ashtray surround. (circled the pieces that go into the holes) The 2nd pic shows them sticking up better.
The ashtray top cover.
Last edited by billecorgan; 04-02-2012 at 10:02 PM.
I just want to get rid of these so I can replace my dash trim and not cover these nice pieces. Anyone wanna do like $50? With shipping? For all pieces, again includes the ashtray that works perfect and the three dash pieces, the four door pieces. I think that's it. And I still would want to do that core charge, but only $20 is fine, so $70 at first, then if you send me your three pieces on dash, I will refund your $20. Again, I don't care what shape they are in because I'm going to throw vinyl over them anyway. The wood is in terrific shape. I don't see a scratch anywhere.. I don't know if they even can scratch. Thanks again everyone.
It took me a while to confirm, but I have confirmed that the pieces I have will fit a Jetta. I have asked for part numbers off of two different people on ebay that are selling this same wood and have it listed for a Jetta. The numbers on the back of my pieces are the same. Still trying to get $50 out of it and that's with shipping. Thanks.
I guarantee it to fit or I will refund your money and even refund your costs to ship it back to me. The numbers on one of the rear pieces are 1K4 867 450A.
Last edited by billecorgan; 04-26-2012 at 02:15 AM.