How much you looking for?..
#1
SOLD
1150 5083
$750 with polo 6n bushings and euroimage half caps
$700 with stock bushings and stock caps
Willing to ship at your expense. It shouldn't be more than 50 for the lower 48.
About 10k on each set of bushings/bearings and about 20k on the coilovers
This is the only thing wrong with them: you'll have to use air tools or simply hold the strut with a vise grip as you tighten the nuts down like I did.
![]()
![]()
Last edited by jarlsberg; 05-08-2012 at 01:57 PM.
#5
#6
They only make two different kinds as far as I know. One for the mk4 vr6's and another for 2.0/1.8t's; these are for a vr6 meaning, they're just slightly stiffer up front to compensate for the extra 85 pounds or so.
Pics for you entertainment =) I'm very happy with how low they sit. I always told myself if I wanted to go any lower, I'd go air, and well, you guess it, I'm going air
![]()
*no pics of the koni's themselves as they are curently installed, sorry. They'll be out very soon.
Last edited by jarlsberg; 04-30-2012 at 09:16 AM.
#7
http://www.namotorsports.net/Koni/Su...er=KO1150.5083
These bad boys?
#8
That's them! Except NAMotorsports has them labeled wrong =P The part they show are the ones I have (for a vr6), but they show it as being for the tdi and 2.0. There is actually another setup they sell for the other engines, but their basically the same thing.
*overly complicated. My B
#11
#14
They should be out of the car not this weekend but next! Save up your monies!![]()
#17
#19
#22
#23
After riding on air for the last 2 days I already miss these konis![]()
#24
Up top for finally cleaning them and throwing pics up!![]()