Pic. Of the vr6 cluster plizzz![]()
#1
Trying to downsize random parts that are collecting dust.
First up is a 2.0 9a Block and early ABA forged crank. The block is bare and comes with the main caps and crank only; no intermediate shaft, oil squitters, or rods/pistons.
$75 OBO
Early forged ABA Rods/Pistons; rods are in great shape, pistons are ok. They have some valve marks from a timing belt failure (the block had low miles when I purchased it; ABA was swapped out for a VR)
$60
144mm 20mm Pin 16v 9a Rods; Balanced, line honed, with ARP hardware. Ready to drop in and they are labeledOnly reason I'm not using them is I just picked up a set of SCAT rods. $150 OBO
I have a lot more including and not limited to:
2 MK3 dash swaps $250 (for complete swap; HVAC, knee bar, steering column) $150 (dash and plastics)
MK3 Golf/GTI interior trim $5-$20? (pretty much everything from the A-C pillars painted black)
17x7" 5x100 Wheels (Panasports) $200
Sorry only have 3 center caps
1 Good 205-15-50 Hankook $25
1 Good 205-17-40 BF Goodrich $25
Black MK3 Hatch $50
MK2 Golf/GTI New never been used small window regulator $10 (driver side)
More Parts:
OBX VR6 Header $100
020 16v Pressure Plate; New $40
MK2 Teardrop center caps $40
![]()
New MK2 Motor Mount bracket $30
New Hydro Trans Mount $15
MK3 GTI Tail Lights; no cracks with trays and gaskets $60
Pass. side MK3 GTI Tail light (small crack) $15
Euro clear Corrado G60 Turns+Fogs $150
MK1 T-cable $10 (used for 5k miles)
I know there's a lot I can’t rememberif you are looking for something let me know. All prices are OBO, thanks for looking. More Pictures Soon
Last edited by suki101; 05-14-2012 at 10:51 AM. Reason: Adding Pictures
#3
Info on that rear beam please!!!
#4
#6
#7
For Pictures; once I find where I put the clusters
I'll post them tomorrow.
#8
#9
#10
#11
What was the beam originally from?
#12
#23
It was nice meeting you and your brother the other day. Thanks for the cluster, it's working fine. It's great to have the MAF displays working again.
Bump for a good seller.![]()
#24
#29
Bump for one of the coolest dudes I've met in a while it was fun talking with u bro and good luck and we'll go get the parts later this week thx again![]()
ëuroBröke
Freedom-Industries.net
#30