Starting cleaning my bay

[eeemolaaa3551]

so quick question but id like to first say i did use the search button but couldnt find it. when i took out the washer res i read on one thread that you connect the two wires to get rid of the light on the dash but what plug is that . also i would like to know what everyone else did with the other wires i took some pics if that helps

i know there is another plug i thought it was in the pic but guess not is that that one i cut and connect or is it the one with the green arrow not sure what to do with the other plugs that are in the red guessing they go to the hood and rear wiper

[87vr6]

Wrap a bare wire around the two prongs being pointed at by the green arrow, cover with electrical tape.

The other stuff don't worry about. Tuck the wires into the fenderwell

[eeemolaaa3551]

yeah before you responded i just cut it and twisted them together is there anyther things i can delete without getting a sai flash from unitronic im stage 2 already and i didnt want to spend the extra 50 dollars. stupid me i moved to florida and the only uni shop is 2 hours away

[pgrink33]

you can delete your pcv and n249 as long as you have the resistors for each. you can not delete you evap or sai. im having a hell of a time getting my car inspected right now lol

[eeemolaaa3551]

there is a thread for just thoes right ..... sorry im new to the whole cleaning the bay thing just want to do it right the first time and yeah i plan on ordering the block off plate so i can get rid of it all and the drive down to orlando to get the sai delete

[Jigga Jay]

while we are in this subject, i have a ?. i didnt the sai delete, got the combi valve block off plate and unitronic stg . so why do i still have a sai incorrect flow detected fault! i just dont get it!

@87vr6- i know u know something! help me and everyone else out
PLEEEEEAAAASSSEEEEE

[pgrink33]

there is a thread for just thoes right ..... sorry im new to the whole cleaning the bay thing just want to do it right the first time and yeah i plan on ordering the block off plate so i can get rid of it all and the drive down to orlando to get the sai delete

http://forums.vwvortex.com/showthrea...%3A+engine+bay

[pgrink33]

while we are in this subject, i have a ?. i didnt the sai delete, got the combi valve block off plate and unitronic stg . so why do i still have a sai incorrect flow detected fault! i just dont get it!

@87vr6- i know u know something! help me and everyone else out
PLEEEEEAAAASSSEEEEE

the only way to fix that is to get the delete for that from what ever software you have. some people get lucky and it doesnt come on. mine comes on within 5 min of deleting the code

[87vr6]

Jigga. You blocked off the SAI port without the software delete, that forces the incorrect flow code, because, well, there is no flow... So even though you say you didn't do the SAI delete, you effectively did that, even if the pump is still present.

[87vr6]

there is a thread for just thoes right .....

Yes. If you're going to get the software soon and don't need to be inspected before then, just delete it all at once.. Much easier.

[eeemolaaa3551]

yeah the unitronic is 50 doll hairs to fix the code

[Jigga Jay]

Jigga. You blocked off the SAI port without the software delete, that forces the incorrect flow code, because, well, there is no flow... So even though you say you didn't do the SAI delete, you effectively did that, even if the pump is still present.

no no no. i did delete the sai. last year at h2o my a/c compressor seized. and i spent 6 hours on my back with minuim tools. so the sai had to come out in order to get the compressor out.
so the sai pump and all the lines were removed, the combi valve removed. and unitronic software. i mean maybe i was supposed to tell them that i had my sai deleted before the tune?
i was under the impression that the sai delete was standard to the tune. maybe i was wrong....

eeemolaaa3551- sorry for semi jacking your thread, but u raised a good point so i had to get answers, while we are on the subject

[eeemolaaa3551]

its all good i started the cutting wires before i even got a response and i guess i got it right but im not sure as of what to do next

[87vr6]

i mean maybe i was supposed to tell them that i had my sai deleted before the tune?
i was under the impression that the sai delete was standard to the tune. maybe i was wrong..

Yes, you have to tell them. They don't just give it to you.