Damn, now I feel like a punk bitch.
![]()
#1
Screw your porta FJ. I got a Caterpillar 735 with a porta. Note the porta supplier
Cut me off, I dare ya
Love this truck. 140,000lb loaded, 8spd auto. Exhaust brake, AC, and a pretty bad ass stereo
Engine
Make Caterpillar
Model C15 with ACERT Technology
Gross Power 413 hp
Net Power 394 hp
Displacement 927.6 cu in 15.7L
Torque Measured @ 1200 rpm
Max Torque 1524.5 lb ft
Aspiration Turbocharged
Number of Cylinders 6
Operational
Fuel Capacity 147.9 gal
Hydraulic System Fluid Capacity 61.6 gal
Cooling System Fluid Capacity 21.1 gal
Engine Oil Capacity 10 gal
Transmission Fluid Capacity 19 gal
Tire Size 26.5R25
Transmission
Number of Forward Gears 8
Number of Reverse Gears 1
Max Speed 36.2 mph
Weights
Front Axle - empty 40013.9 lb
Center Axle - empty 14087.5 lb
Rear Axle - empty 12588.4 lb
Front Axle - loaded 48479.7 lb
Center Axle - loaded 45900.2 lb
Rear Axle - loaded 44401.1 lb
Total Empty 66689.8 lb
Total Loaded 138781 lb
Dump
Rated Payload 72091.2 lb
Capacity - Struck 19.2 yd3
Capacity - Heaped 25.8 yd3
Raise Time 11 sec
Lower Time 7 sec
Dimensions
Overall Length 35.7 ft in
Overall Width 11 ft in
Overall Height 12.1 ft in
Wheelbase 17.1 ft in
Ground Clearance 1.8 ft in
Dump Height 22.8 ft in
Dump Ground Clearance 2.1 ft in
And yes, I go through all 150 gallons of diesel in a single shift every day. Eat that Prii owners![]()
R135
└┼┼┤ /A4
- 246
#5
#6
It's probably a little cheaper. That truck likely runs on off-road "dirty" diesel, which is similar to home heating oil. Plus, that truck probably carries a 6-figure price tag, and earns stupid money for the company on a daily basis.
I second the question about the porta supplier...?
1998 GTI 2.0
1993 Jeep ZJ 4.0
World Automotive
Need any VCDS (VAG-COM) diagnostics or coding in the North NJ area? PM me.
#7
Clearly the FT-86 needs that motor. Then it'd have enough torque to get over the hills and pass safely.
#8
Classicmotoringllc.com - my new brokerage and consulting business based out of a lavishly converted first floor bedroom in Allentown, PA. I am always looking for quality enthusiast cars to consign, research projects or consultation opportunities. Keep an eye on my page as you can see my blabberings about cars and other such junk in the blog section!
#9
#11
not bad not bad
we had a hell of a time getting this parked yesterday. Its a little bit bigger than your truck70footer with a 40ft slideout
![]()
'63 VW - '04 F250 - '13 Terrain - '77 XS650 Cafe Racer showbike FS/FTOriginally Posted by Adler v. Relynet
#12
#16
#18
"Cut me off I dare you" Oh with your 60 kph top speed I'm sure you'll catch up to me in 20 or so odd years..but when you do..![]()
But seriously, kick ass ride![]()
![]()
#19
I did the tune/rating on that C15 for the 735/740AT before I left CAT. I miss calibrating the big engines.
06 GLI
98 Jeep Cherokee
#21
Our company just took possession of 3 custom built western star heavy haul/prime mover trucks. It doesn't have as much power as your but i think the overall length is about 40 ft.
#22
#23
stanced/fatlaced
Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts. Broad, wholesome, charitable views of men and things cannot be acquired by vegetating in one little corner of the earth all one's lifetime.
Mark Twain
#24
Thought it would have more torque. I mean you can get a Chevy pickup with 765lb ft right?
#25
I used to drive this at work along with every other U.S Army wheeled vehicle.
![]()
#27
#28
#29
#30
#31
#32
google taurus armoured recovery vehicle, i think i win this fight.
#34
Funny thing, BJ's porta-jon serviced a work site I worked at a short while ago. I stopped the lady servicing the crapper and asked if I could have a shirt when she stopped by next week so that I could give it to my brother in law who is Bill Junior, BJ. My sister commented that since I gave it to him it sits in the bottom of his drawer.
My big work (volunteer firefighter) truck:
Chris