Spanner Wrenches for the weekend? Let me know gotta pass recon :/

[Vovegas2200]

So I failed RECON again!!!!! I need to get ahold of some Spanner wrenches to get right!!!!!!!!!!! I am going crazyyyyyyyy I have FK coilovers..... please let me know if you can help a fellow Dubber!

[808Bora]

Hammer & a screw driver bro....

[Thai-assasin]

Yeah, I use a hammer and a screw driver for my rears. The wrenches wont fit unless I take everything out and you can get it nice and snug.

[joeyvdubGLI]

crank that thing to stock height mode just for recon so you they don't fail you again

[Vegeta Gti]

do what alex did, put stock stuff int he front and pass. so many peopel raise and fail a second or third time.

[dogbone]

do what alex did, put stock stuff int he front and pass. so many peopel raise and fail a second or third time.

do this

you'll look silly with a bit of reverse rake but it should get the job done.

but if you insist on trying the raise hit me up for the wrenches. i'm not too big on lending stuff out unless i know you really well but i'll hang while you spin up if we can work out a time that works with my ridiculous schedule

[Vegeta Gti]

do this

you'll look silly with a bit of reverse rake but it should get the job done.

but if you insist on trying the raise hit me up for the wrenches. i'm not too big on lending stuff out unless i know you really well but i'll hang while you spin up if we can work out a time that works with my ridiculous schedule

good offer here, spin up your coils.your chances of passing the "bounce test" are still slim. unless like most fk suspension your coils are blown.

Sent from my SPH-D710 using Tapatalk 2

[a1234567390]

do what alex did, put stock stuff int he front and pass. so many peopel raise and fail a second or third time.

seriously this is the only way to pass. the paper on mine says it's higher on the front, but to be honest once i got the recon sticker, i haven't gotten hassled by cops since. and i am stupid low, so that's a major cop magnet lol

[Vovegas2200]

Got the front up a bit! Making my appt! Thnks alot! I meet up with Alex today I will pass the "bounce test" Gahh! We scanned her up and checked for fault codes, good to go! With a new PCV valve in the mail ( come on thursday) I should be pushing 20 psi now! New DV on tomorrow or the next day whenever I get the time to get under there lol.