let's get some more people to post up
8v Society #362
Front: 17x10 ET20 205/45/17 TT/R32 spindles and control arms with camber maxed,
fenders rolled, aggressively
Rear: 17x10.5 ET22 215/45/17
Slight DIY pull.
Last edited by blue bags; 05-18-2012 at 06:56 PM.
19x8.5" all around
25mm spacers on rear - final offset et10
15mm spacers up front - final offset et20
215/35/19 all around - conti xtreme contact DWS tires
Bluewater adjustable rear lower control arms
fenders rolled: no (although they should be, rubs a bit)
fenders pulled: no
(i had a little too much camber on the rear before, since the photos i adjusted it out a little and now it sits exactly as the front)
andy_right_rear by AndyE666, on Flickr
Andy_1-2 by AndyE666, on Flickr
Last edited by milwaukeeandy; 05-04-2012 at 10:29 AM.
Front: 17x9.5 et23 205/40/17
Rear: 17x10 et19 215/40/17
Fenders Rolled: Yes
Fenders Pulled: Wish, but no
Last edited by _Dirty_; 10-09-2013 at 08:16 PM.
Last edited by Billburt; 05-04-2012 at 04:59 PM.
MotorsportsbyReeves__The SteveGangBang 11.21__TheHazeBang_2012_TheGreatCatTakeover2012_
big thanks to everyone who has continued to post up in here
Billburt: no need to edit your post; feel free to make a new post with the new offset that way we can keep the old rear specs/photos for others to see
My offsets say "ish" because of my rear IDF camber plates and adapters being in inches and not millimeters. None-the-less, they're very close.
Front: 18x8.5 final et19-ish
Rear: 18x9.5 final et14-ish
Fenders Rolled: yes*
Fenders Pulled: yes*
*The top 2 pics are with pulled and hammered out fenders, the bottom two represent FRONT factory fenders and pulled REAR fenders.
Mk6 Jetta Sportwagen 2.5l (daily)
Mk1 1979 Scirocco Special Edition 5-Speed (resto project)
Mk6 Golf TDI (sold)
Mk4 Jetta GLI (parted)