Mk4 Wheel Offset and Stance Picture Index

[liquide]

Front: 18x9 et21 215/40/18
Rear: 18x10 et28 225/40/18
Fenders Rolled: Yes
Fenders Pulled: No



Front: 18x9 et25 on the below pic

[blue bags]

Front: 17x10 ET20 205/45/17 TT/R32 spindles and control arms with camber maxed,
fenders rolled, aggressively


Rear: 17x10.5 ET22 215/45/17
Slight DIY pull.

[.Ant]

Front: 17x8.5 et19 205/45/17
Rear: 17x9.5 et25 215/45/17
Fenders Rolled: Yes
Fenders Pulled: No

[Clean PG]

thanks everyone for posting up

[justmalpica]

does any one have any input on 215/35 on an 18x8 wheel tring to figure out what size adapters to order thinking 22 offset in the rear unsure of the fronts.

[foundubbedriver]

Front: 19x8 et27 215/35/19
Rear: 19x9.5 et31 215/35/19
Fenders Rolled: Yes
Fenders Pulled: No









not my greatest examples of fitment but you get the idea..

[milwaukeeandy]

19x8.5" all around
et35 originally
25mm spacers on rear - final offset et10
15mm spacers up front - final offset et20
215/35/19 all around - conti xtreme contact DWS tires
Bluewater adjustable rear lower control arms

fenders rolled: no (although they should be, rubs a bit)
fenders pulled: no


(i had a little too much camber on the rear before, since the photos i adjusted it out a little and now it sits exactly as the front)


andy_right_rear by AndyE666, on Flickr


Andy_1-2 by AndyE666, on Flickr

[scirockalot8v]

front: 17x8.5 et30 215/45-17 falken 912
rear: 17x10 et30 245/40-17 falken 912
rolled: yes, with a brick.
pulled: rears...kinda.
for now.


update: final offset is now +25mm.

[Black Mamba]

Watching...

[_Dirty_]

Front: 17x9.5 et23 205/40/18
Rear: 17x10 et19 215/40/18
Fenders Rolled: Yes
Fenders Pulled: Wish, but no

[Billburt]

Front:18x8.5 et30 205/40 nitto neogens
Rear: 18x8.5 et25 205/40 nitto neogens
Fenders Rolled: Yes
Fenders Pulled: No

*edit: My rears have IDF drop plates so I'm not sure what that changes my offset to.
fronts have -2.1 camber and the rears have -3.8 camber



my rears will be changing to et30 soon

[Clean PG]

big thanks to everyone who has continued to post up in here

Billburt: no need to edit your post; feel free to make a new post with the new offset that way we can keep the old rear specs/photos for others to see

[YNO WGN]

Front: 17 x 8 et10 205/45 Falken 512s
Rear: 17 x 9 et20 215/45 Falken 512s
Fenders Rolled: Yes
Fenders Pulled: No
Camber: Stock

[Pitty]

Front 18x8,5 et 23 215/35/18
Rear 18x9,5 et 23 225/35/18
Fenders Rolled: yes
Fenders Pulled: no

[subisan]

My offsets say "ish" because of my rear IDF camber plates and adapters being in inches and not millimeters. None-the-less, they're very close.

Front: 18x8.5 final et19-ish
Rear: 18x9.5 final et14-ish
Fenders Rolled: yes*
Fenders Pulled: yes*

*The top 2 pics are with pulled and hammered out fenders, the bottom two represent FRONT factory fenders and pulled REAR fenders.

[Billburt]

Billburt: no need to edit your post; feel free to make a new post with the new offset that way we can keep the old rear specs/photos for others to see

gotcha! I cleaned up my post and added my camber in there and that I have the IDF drop plates in there.

[Mikey Pants]

Front: 17x9 et23 205/45 Falken 512
Rear: 17x10 et 23 215/45 Falken 512 w/ -2.5* camber
Fenders Rolled: Yes
Fenders Pulled: No

[Clean PG]

i modified the index so now it shows if the offset listed is for a Front or Rear fitment. i figured that's more useful than the Post #

[Clean PG]

bump for more views/posts. let's see this thing get to 10 pages of specs and photos

[strumski]

Front: 18x8.5 et25 215/40 Falken 512
Rear: 18x10 et 32 215/40 Falken 512 close to -4 degrees camber (idf plates)
Fenders Rolled: Yes
Fenders Pulled: No

[subisan]

^^you sure you're not running 40 series sidewalls and not 45's??^^

[strumski]

^^you sure you're not running 40 series sidewalls and not 45's??^^

fixed *thanks i was lazy and copy and pasted someone wih 17's hahaha

[scirockalot8v]

updated mine with new offsets and picture.

[BMP__GLI]

awesome thread!!!! keep em coming! will post mine once setup is complete

[jayjevans0304]

Front: 18x8.5 et15 205/40/18
Rear: 18x10 et13 225/40/18
Fenders Rolled: Yes
Fenders Pulled: No

this!

[RDIRTYTOO]

18x9.5 front et 24
18x9.5 rear et 22 tires 225/40/18 all around

front fender pulled and rolled
rear fender nothing

[werdnakills]

Awesome thread

[wagner17]

only fronts test fit.

front: 18x9.5 et 18 215 40 18 falken 912
fenders are just rolled flat and slight pull from airing out
tt control arms and spindles max camber on airlift xls

[Clean PG]

updated the glossary

and wagner that front fitment is freakin amazing i r jelly

[wagner17]

my 18inch rs's will be that way. keep a look out for me ill post pictures when im done. thanks for the props

[shanewoodworth]

Front 18x8.5 et 35 215/40/18
Rear 18x9.5 et 30 225/40/18
Fenders Rolled: not yet
Fenders Pulled: no

[scirockalot8v]

my 18inch rs's will be that way. keep a look out for me ill post pictures when im done. thanks for the props

i want to see a full shot down the side! i believe your the first to run the rear c5's all around.

[wagner17]

these were my buddies i just test fit his 18x9.5 with his 38mm adaptors so its a 18 but my rs's im building will be a 9et12 same poke as the 9.5et18 but the rear i slapped on his 9.5 with a 38mm plus a 5mm so it was 9.5 et 13 in the rear which is the same poke ill have in the rear 10et20

lolsorry thread jacked

[mini man]

this thread is soo helpful.
BUMP FOR MORE POSTS!!!

[wagner17]

up