FS: Lots of Cabby parts. Cheap.

[backinthegame]

Closed thread.

[Andy Mac]

Dibs on the 1/4 glass and seals.

PayPal?

[ShaggyMutt1]

Would u consider trading some parts for a power inverter

[cabron1991]

If it has air bag steering wheel ? I need the rubber seal that goes on the inside of the windshield which covers the gap in between the glass and the frame for the bond in windsheilds. If so please call me @ 772 985-4406 or email me @: axalonso@hotmail.com

[backinthegame]

If it has air bag steering wheel ? I need the rubber seal that goes on the inside of the windshield which covers the gap in between the glass and the frame for the bond in windsheilds. If so please call me @ 772 985-4406 or email me @: axalonso@hotmail.com

Sorry, I don't have any of those right now.

[cabron1991]

Thanks for the fast reply...

[mAutopsy]

very interested in the cyclops bezel, but i want to be sure it will work proper in my 91.

[backinthegame]

very interested in the cyclops bezel, but i want to be sure it will work proper in my 91.

The wiring can be spliced with the included pigtails, however, you would need to swap to a Rabbit dash.

[ch47dr]

Did your 92 have power steering? If so, are you selling the rubber dust boot at the bottom of the steering column just above the rack and pinion.

Thanks

[ch47dr]

Did your door cards have the leather inserts, if so, what color?

Thanks

[backinthegame]

Did your 92 have power steering? If so, are you selling the rubber dust boot at the bottom of the steering column just above the rack and pinion.

Thanks

Power steering was sold complete.

Did your door cards have the leather inserts, if so, what color?

Thanks

Kept them for my cabby.

[winsbluejetta]

will be asking about parts soon

[backinthegame]

Back on top.

[backinthegame]

TTT

[92droptop]

Do you still have the three gauge set for the center console? How much to ship to 27529? Thanks

[92droptop]

Sorry I see that prices include shipping, let me know about the gauges. Thanks

[backinthegame]

Sorry, gagues sold this morning.

[earl grey]

Oooo, I need dash parts. Will this stuff fit an '87 cabby? I have to take inventory and see what all I need... yummmm! dash parts!

[backinthegame]

Oooo, I need dash parts. Will this stuff fit an '87 cabby? I have to take inventory and see what all I need... yummmm! dash parts!

Yes, dash parts are 82-93 except for the cyclops bezel and the center vents.

[mk1rick]

do u still have it and by any chance was ur cabby year 1992?

[backinthegame]

do u still have it and by any chance was ur cabby year 1992?

Do I still have what? I still have lots of things?

[tinygiant]

passenger side cv axel shipped to 03867?

[thomasbowen]

Hello - need rear bumper skin shipped to 33328. Thanks in advance.

[proud cabriolet guy]

Hi,
fairly interested in the right (Passenger side) fender if it is completely rust-free and without dents.
Please let me know.
Thanks

[Jonxy]

Interested in a trunk and a glove box lock and key

Sent from my PG86100

[backinthegame]

Interested in a trunk and a glove box lock and key

Sent from my PG86100

I'll see if I can find the glovebox lock that matches the trunk key.

[lucero]

PM Sent

[Jonxy]

I'll see if I can find the glovebox lock that matches the trunk key.

Any update?

Sent from my PG86100

[backinthegame]

I have an ignition and trunk, or an ignition and glovebox but not one key for all three.

[phatatude]

I am def interested in all of the motor mount stuff. Shipping to 68164?

Cabbys - Worlds coolest Tanning Bed...

[MissHood]

PM'ed Ya

[hellandback]

hi;

looking for rear bumper rebar and frame brackets shipped to 14303?

Thanks in advance Tim

[viperfv]

What color are the door panels and quarter panels and what shape? Also looking for a good rack, p/s prefered but would go with no p/s. Also looking for the plastic pieces that go around the interior door latch and the cup piece behind the latch.
Jim

[Phildini]

I would like to buy the big bumper - how much shipped to 54914?

[dmccrea]

I need the following 3 parts/things for my 1987 VW Cabriolet:

1) Right (passenger side) front turn signal light assembly for metal/aluminum bumper. This is a Hella TVK18 light assembly (amber lens with housing that has an attachment screw on each end and wiring harness). Lens measures: 5 1/4" long by 1 3/4" wide with 2 screws, one on each end, to hold lens in place. On the lens housing, the measurement between the two screw hole center masses that holds lens to bumper is 6". I would like to have enough of the wiring harness sent to me to reach back into the grill/engine compartment for rewiring purposes. If needed I can send a picture.

2) I need the emergency flasher on/off switch for the dash inside the car. The red portion of mine is missing.

3) I am looking for a radio with at least an aux. input for IPod. I would be so please if radio could also play cd's.

I live in Laredo, TX 78041

Thanks.

Dennis
Cell or text: 956-3 two four-7775