Sent from my iDevice using Tapatalk
#1
**************SOLD************************
![]()
Last edited by NogaroB5S4; 05-30-2012 at 04:29 PM.
#3
Interested, more details needed.
The final note - "The pursuit for a Passat/CC 4Motion performance exhaust"
'Ein Trottel nicht an der Tat zu hören"
#5
Install instructions:
1. VCDS - old cluster:
Enter controller 17-Instruments
Select Adaptation - 10
Search the drop-down menu for:
Distance
ESI: Distance driven since inspection
ESI: Time since inspection
ESI: Soot entry
ESI: Thermal load
» Copy existing data in those fields... and others you might want (Good idea to also copy the Importer/WSC/... codes, to keep things as close to the original as possible)
2. Cluster swap:
(All is needed is a simple trim remover tool and a torx T20 screwdriver)
Remove dashboard and radio/nav trim pieces
Unscrew 2x screws to the left of the cluster, above the light switch...
...+2 screws to the right of the cluster (1 to the left of the hazard lights switch; 1 on the bottom left of the radio/nav unit)
...+1 screw behind the light switch (push switch and turn clockwise; then pull entire switch to release)
Remove fuse cover, unscrew 2 screws (facing the fuse box, 1 on top left, 1 on the right)
Pull plastic assembly (it will still be holding on by some clips)
Now unscrew the 2 screws on the bottom part of the actual cluster; tilt cluster forward (2 clips on top hold it in place); unplug connector...
Take the new cluster and install it following the above steps in reverse order.
3. VCDS - New cluster
Enter controller 17-Instruments
Select Adaptation - 10
Search the drop-down menu for:
Production mode = switch from ON to OFF (the high beam blue warning light in the cluster stops blinking and distance counter switches from "Pro" to "0"
Distance = paste Km from old cluster. NOTE: it only works in 10Km intervals (example.. 12528Km, and the assumed value would be either 12530Km or 12520Km).
(...other ESI data » paste accordingly)
Last edited by NogaroB5S4; 04-25-2012 at 11:12 PM.
#6
All current screen options will remain? Nothing is lost? Any no IMMO setting as required in the MK4 clusters?
The final note - "The pursuit for a Passat/CC 4Motion performance exhaust"
'Ein Trottel nicht an der Tat zu hören"
#7
Message sent.
The final note - "The pursuit for a Passat/CC 4Motion performance exhaust"
'Ein Trottel nicht an der Tat zu hören"