Happy Friday!
+ Reply to Thread
Results 1 to 35 of 67
-
IE Billet Fuel Rail For VW/Audi 1.8T 20V in Stock and On Sale at Bluewater Performance!!
04-26-2012 06:16 PM
#1
We are proud to offer this Integrated Engineering billet aluminum fuel rail for VW/Audi 20V 1.8T engines. These are made in house from 6061 aircraft aluminum, to provide a beautiful one piece design. These rails have integrated mounts, for a much simpler install. These feature -8an O-ring boss ports, which will be enough flow for even the most wild setups. There is no need to worry about injectors coming out either, as these rails retain the factory injector clips for added safety.
Only $155.00 Click here to order
Features:
Made in house from 6061 aircraft aluminum
Stunning 1 piece design
8an O-ring boss ports
Retains factory injector clips
Available in IE red anodize, black anodize, or raw finish
Last edited by hollywood@bwperformance; 05-09-2012 at 07:16 PM.
-
-
04-27-2012 11:41 AM
#2
-
Member
- Join Date
- Dec 11th, 2011
- Location
- Boston
- Posts
- 813
- Vehicles
- mk4 sled
04-27-2012 12:07 PM
#3
The pictures kinda make it look like this is a BWP product instead of an IE product.
science: it's for real.
-
-
Member
- Join Date
- Feb 2nd, 2010
- Posts
- 1,593
05-02-2012 07:15 PM
#5
hey hollywood, do these have the IE logo on them or BW's?
Unitronic830cc/Racetronix 846cc flowmatched injectors/HP6262SP-b/ TurboSmart Race Port/PrecisionPW39/TurboSmart MBC/Snow W/M Injection/IE Rods/AEB pistons/ARP Main cap studs/ARP headstuds/3" turboback/ FMIC/Custom fuel surge tank/ Wally 255/AEB head/supertech single keeper valves/ IECVA1 cams/IE valve springs and retainers/034 motor mounts. SPEC Stg 4 6 puck clutch, Vr6 lightweight flywheel. KRM intake manifold/80mm tb
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
05-02-2012 08:36 PM
#7
What Gabe said
Originally Posted by Mindfault
-
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
Member
- Join Date
- Feb 2nd, 2010
- Posts
- 1,593
05-09-2012 07:08 PM
#10
U got any aeromotive adjustable fpr's? I need both fuel rail, fpr and also a liquid filled gauge.
Unitronic830cc/Racetronix 846cc flowmatched injectors/HP6262SP-b/ TurboSmart Race Port/PrecisionPW39/TurboSmart MBC/Snow W/M Injection/IE Rods/AEB pistons/ARP Main cap studs/ARP headstuds/3" turboback/ FMIC/Custom fuel surge tank/ Wally 255/AEB head/supertech single keeper valves/ IECVA1 cams/IE valve springs and retainers/034 motor mounts. SPEC Stg 4 6 puck clutch, Vr6 lightweight flywheel. KRM intake manifold/80mm tb
-
Member
- Join Date
- Feb 2nd, 2010
- Posts
- 1,593
05-09-2012 07:10 PM
#11
Im down to support some good colorado peeps tho!
let me know, shoot me a pm or something
Unitronic830cc/Racetronix 846cc flowmatched injectors/HP6262SP-b/ TurboSmart Race Port/PrecisionPW39/TurboSmart MBC/Snow W/M Injection/IE Rods/AEB pistons/ARP Main cap studs/ARP headstuds/3" turboback/ FMIC/Custom fuel surge tank/ Wally 255/AEB head/supertech single keeper valves/ IECVA1 cams/IE valve springs and retainers/034 motor mounts. SPEC Stg 4 6 puck clutch, Vr6 lightweight flywheel. KRM intake manifold/80mm tb
-
05-09-2012 07:23 PM
#12
I apologize but we do not have any Aeromotive FPRs or gauges however within a few months we will have our own Bluewater adjustable FPRs. Originally Posted by Mindfault
U got any aeromotive adjustable fpr's? I need both fuel rail, fpr and also a liquid filled gauge. Your best bet is probably to try Aeromotive directly.
-
Member
- Join Date
- Feb 2nd, 2010
- Posts
- 1,593
05-09-2012 07:49 PM
#13
Word to big bird hollywood, im sure those bw fpr's will be nice. But yeah, ill be getting ahold of you guys tomorrow afternoon hopefully.!
Unitronic830cc/Racetronix 846cc flowmatched injectors/HP6262SP-b/ TurboSmart Race Port/PrecisionPW39/TurboSmart MBC/Snow W/M Injection/IE Rods/AEB pistons/ARP Main cap studs/ARP headstuds/3" turboback/ FMIC/Custom fuel surge tank/ Wally 255/AEB head/supertech single keeper valves/ IECVA1 cams/IE valve springs and retainers/034 motor mounts. SPEC Stg 4 6 puck clutch, Vr6 lightweight flywheel. KRM intake manifold/80mm tb
-
05-09-2012 07:50 PM
#14
Sounds good!! Chat at ya soon! Originally Posted by Mindfault
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
05-10-2012 02:54 PM
#15
You can always combine these with one of the FPR adapters that we stock which will allow you to run your stock FPR.
-
Member
- Join Date
- Feb 2nd, 2010
- Posts
- 1,593
05-10-2012 05:23 PM
#16
Gabe i know of these adapters, but i want it remote mounted and also i want a liquid gauge and adjustable. But good look!
Unitronic830cc/Racetronix 846cc flowmatched injectors/HP6262SP-b/ TurboSmart Race Port/PrecisionPW39/TurboSmart MBC/Snow W/M Injection/IE Rods/AEB pistons/ARP Main cap studs/ARP headstuds/3" turboback/ FMIC/Custom fuel surge tank/ Wally 255/AEB head/supertech single keeper valves/ IECVA1 cams/IE valve springs and retainers/034 motor mounts. SPEC Stg 4 6 puck clutch, Vr6 lightweight flywheel. KRM intake manifold/80mm tb
-
-
05-16-2012 02:17 PM
#18
Happy Hump Day!!
-
Junior Member
- Join Date
- Jun 3rd, 2008
- Location
- Indianapolis, Indiana
- Posts
- 79
- Vehicles
- 2003 VW Jetta
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
Member
- Join Date
- Jun 30th, 2007
- Location
- germany/norway
- Posts
- 3,570
- Vehicles
- mk1(1.8t) mk4(2.0)
-
Member
- Join Date
- Dec 11th, 2011
- Location
- Boston
- Posts
- 813
- Vehicles
- mk4 sled
05-22-2012 03:48 PM
#23
Different bolt lengths to accommodate different length injectors. Originally Posted by otti
science: it's for real.
-
05-23-2012 08:06 PM
#24
Happy hump day!!
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
05-26-2012 01:16 PM
#27
Happy Saturday!!
-
05-28-2012 12:09 PM
#28
Happy Memorial Day!
-
05-30-2012 01:35 PM
#29
How's everyone's Wednesday going?? Who's coming to Wuste??
-
Member
- Join Date
- Oct 6th, 2006
- Location
- CBURG PA
- Posts
- 6,333
- Vehicles
- B5.5 Passat, B4 Vr Wagon
-
Banner Advertiser
- Join Date
- Jan 1st, 2009
- Location
- Salt Lake City, UT
- Posts
- 2,953
- Vehicles
- '92 Gti 20v, '96 M3, '10 Shop Van :)
05-31-2012 01:51 AM
#31
Best I can do off the top of my head.
.:IntEngineering.com:. .:Facebook:.
Check out some cutting edge R&D Work on our blog! IE Behind the scenes Blog!
-
06-06-2012 01:45 PM
#32
Bump Bump
-
Banner Advertiser
- Join Date
- Mar 4th, 2011
- Posts
- 2,352
-
-
Member
- Join Date
- Nov 8th, 2002
- Posts
- 651
Extended Weekend!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
For advertising information click HERE
