Over the past few days I've noticed when I come to a stop the rpms drop unusually low and almost stalled a few times.
I just installed the awe Turbo outlet pipe and now when I come to a stop it stalls out when it hits 1k rpm.. Every time
I took everything apart.. Checked it all and it seems tight, and don't hear or feel any leaks
I called my mechanic (at home.. Great guy) and he mentions possible vacuum leak.
He also says to try to disconnect the maf sensor and drive it again to see what happens..
Crazy enough, it stops stalling.
My mechanic said first thought may be the maf is going bad.. But nothing solid.
I just wanted to hear your thoughts on this before I move forward on having it diagnosed..